Sealer Denbergloss Clear

DenberGloss Sealer www.denber-paints.co.il

A transparent penetrating sealer based on a two-component elliptic polyurethane hard top, UV-resistant acrylic, for durability in particularly harsh conditions, especially suitable as a penetrating sealer for concrete and cement infrastructures after curing, acrylic and mineral of all kinds, for a protective top coating for durability in severe and harsh outdoor conditions for many years, prevents the penetration of dirt and water , sealing and wear resistant. Does not fade or disintegrate even with long exposure to the sun.

DENBERGLOSS CLEAR SEALER, PU ACRYLIC UV RESIST POLYURETHANE TWO COMPONENT PENETRATIO AND TOP COAT FOR EXTERNAL USE, DURABILITY FOR HARD DEMANDS

For application on a dry floor only, do not wet with water. Must polish and vacuum only. Moisture spoils the hard polyurethane of the sealer and white spots appear.

Characteristics:

• Penetrates and seals concrete/schlicht/plaster/mineral exterior coating surfaces for water and dirt penetration.
• Smooth and hard finish.
• Prevents the concrete from getting dirty.
• Easy to wash and maintain.
• Flexible for bending and hard for abrasion.
• Very washable and repels dust and dirt.
• High hardness, suitable for sealing items that come in a lot of contact and wear.
• Strengthens the concrete surface against damage and scratches.
• Excellent penetration and adhesion to the infrastructure.
• Resistant to scratches and mechanical damage.
• UV resistant, chemical resistant.
• Heat and cold resistance.

uses:

• Sealer for cured concrete for sealing and protective coating from scratches. for pedestrians, bicycles, cars, etc.
• For Bomanite sealing for 30 days or more.
• For the sealing of an acrylic colored light, it can be applied two days or more after its application.
• and for sealing walls, walls and concrete columns from water penetration.
• for sealing tiles.
• For sealing concrete roller surfaces that have been cured for at least 30 days.
• For sealing parquet and thin floors.
• For sealing natural and artificial stone.
• For sealing marble.

Sealer Dunbargloss Clear for concrete and stone floors and walls, stone and marble abrasion resistant UV resistant, 

Technical data:

• Theoretical coverage – 1 liter per 5 square meters. Varies according to the absorption level of the infrastructure. f
• Recommended layer thickness – 100-200 wet microns. and
• Recommended application – in two layers, each layer 100 microns. and
• Density – 0.9-1.1 gm/cm3 and
• Stiffness – 10 Dg < (Ericsson) f
• Abrasion – 120 microns – 3600 cycles (Gardner) ASTM f
• Base to hard ratio – 2:1
• Durability time of diluted paint in the package – 6 hours (viscosity increase no more than 6 seconds from original viscosity) and
• Pot life = working time from the moment of mixing B+A – 6> hours. and

Shade:
• Clear transparent. and

Luster:
• Glossy, matte, silky. and

Packaging:
• 3.35+1.65 = 5 liters. and

• 5+2.5 = 7.5 liters, f
• 10+5 = 15 liters. and

This technical specification is for non-binding general information only. and
manufactured by Denver Paints and Coatings Israel Ltd. , and

For the full specification:  Sealer for stone for concrete, floors, walls, matte gloss, Dunbargloss and

Glossy denbergloss sealer coating www.denber-paints.co.il