Denber has developed an innovative solution for thermal insulation works

Thermal insulation of the kitchen of the Meir hospital

Description of the problem:

Thermal insulation of refrigerators and freezers rooms was essential in the kitchen of Meir Hospital (Israel), where thousands of visitors are served daily. Each room in the facility is set to a different temperature, depending on the type of food stored in it. Facility workers use trolleys on wheels to move products. The height of the fixing of the refrigerator compartment shelves should be the same on each floor so that the carts can safely and easily exit and enter any cold store from the kitchen.

The problem was that the floor height of the refrigerators and freezers was not lowered to provide conventional thermal insulation, which is usually done with glass wool, and requires a relatively large thickness to be installed. The floor height of the refrigerator and freezer compartments was the same as outside.

Denber’s solution:

Denber Paints has developed an innovative thermal insulation solution.
Since a thick thermal insulation mortar could not be applied, production was problematic, Denver Paints and Coatings Israel Ltd. developed a thermal insulation material based on Polyplex thermosil material, produced using nanotechnology.

Denber CEO Baruch Kogan says: “This thermal insulation material, which only we have in Israel – one to two millimetres thick, provides thermal insulation like 5 cm of glass wool. We used this material to fill the floor of the cold rooms with a thickness of 5 mm and created a high-quality replacement for the thick thermal insulation, which could not be used in this case due to the increase in the floor height of the refrigerators and freezers. ”

Baruch, added that the project is of great importance for the hospital, as poor thermal insulation in refrigerators and freezers means the release of cold and the loss of a large amount of energy, as well as the penetration of cold into the lower floor of the building and the appearance of strong condensation, due to which water drips onto lower floor. Condensation causes mold to grow on the ceiling below.

What the customer says:

According to Eli Perlov, Chief Engineer of the Israel Health Insurance Fund Clalit: “The work done by Denber was characterized by a high level of professionalism, meticulous execution and high technical compliance with full agreement with the customer and his full satisfaction. I approached Denber in great despair and received an answer to the stringent requirements for thermal insulation and high tightness. ”

About Denber:
Denver Paints and Coatings Israel Ltd. Is an Israeli company with a professional reputation accumulated over 30 years of operation.
The company offers a wide range of services and products that are categorized into different categories. The company’s products meet strict quality requirements and pass the strict ISO 9001-2015 quality control system. The company manufactures products in accordance with US MIL SPEC.

The company manufactures, markets and exports paints, coatings, sealants and chemicals for the construction, metallurgical and woodworking industries.
The company specializes in the production of specialty products for aviation, maritime transport, fire protection, electronics, electricity, transportation, etc. in accordance with standards and requirements in Israel and abroad.
The company is engaged in the sale for the civil sector in Israel and abroad for construction companies, contractors and trading platforms.

For more information and free consultation about removing mold please contact us.

web site: denber