Epoxy sealer for floors and counters

Epoxy sealer for floors and counters

Transparent and sealing for interior uses only

Epoxy Floor transparent sealer 1:1 – Sealing epoxy sealer that penetrates floors

For concrete and stone, a transparent, low-viscosity epoxy sealer that penetrates concrete, two-component,  multi-solid , for sealing penetrates stone and concrete elements. Tiny molecular size for deep penetration and the creation of a deep and strong sealed base before polishing or coating with a top layer.

Model epoxy 19 2300 for counters – food approved.

SEALER EPOXYDEN CLEAR – DEEP PENTRATION EPOXY SEALER FOR CONCRETE  AND STONE FLOORS AND ELEMENTS BEFORE COATING TOP COAT OR POLISHING 

A special polyamine epoxy sealer for concrete and stone floors/walls/pillars, extremely strong with a unique, extremely small molecular structure, produced in accordance with strict sealing requirements to prevent the penetration of water, dirt, etc., creates a strong sealing layer with high adhesion to the concrete and stone parts. Also used as a penetrating element or a bridging layer for a thick coating of 100% solids leveling epoxy or polyurethane.

Epoxy sealer for floors and counters www.denber-paints.co.il

Epoxy sealer for floors and counters www.denber-paints.co.il

Characteristics:

  • Penetrates deep into the concrete or stone to the issue (tiny molecular size) and creates an opaque base for painting. Coat the infrastructure with a transparent protective layer that has mechanical strength and high adhesion.
  • Creates a proper preparation for continued coating or polishing.
  • Strengthens the concrete/stone and fills “purim” prevents the penetration of liquids and dirt.
  • Resistant to alkaline solutions and diluted acids and to unusual humid and salty conditions.
  • Excellent adhesion to the infrastructure. Also used as a bridging layer for coatings such as epoxy or 100% solid polyurethane.
  • Gives opacity and extends the service period.
  • Easy to apply and dries quickly.
  • Ready for repainting and/or coating with an upper layer the same day after 3-4 hours.
  • High coverage area. Layer thickness is required to be extremely thin.
  • Resistant to fuels and oils including jet fuel.

uses:

  • For sealing concrete floors and walls to prevent the penetration of liquids and dirt.
  • A high-quality sealer for all sealing purposes in building, art, etc.
  • Sealer layer before polishing/polishing.
  • Primary sealer layer before foundation in the process of coating oil-soaked concrete floors. To stop capillary rise of oil after deep polishing.

Transparent and sealing for interior uses only

Technical data:

  • Coverage – 1 liter per 4 square meters in a layer of 250 wet microns. (also depends on the density of the concrete/stone)
  • Density – 0.9-1.1 gm/cm 3  (1475 DIN 51575, ASTM D)
  • Stiffness – 10 Dg< (Ericsson)
  • Recommended layer thickness – 150-250 dry microns
  • Recommended number of layers – 1-2 according to the infrastructure for complete sealing
  • Pot life (working time from the moment of mixing A with B) – 4 hours. (After 4 hours the B+A mixture has a viscosity less than 70 seconds in #4, after 8 hours no gels will be formed)
  • Mixing ratio A:B – 1:1 by volume.

variety:

  • Clear

Lightning:

  • Brilliant – standard.

Touch drying :

  • < 2 hours in summer.  
  • Final 4 hours

packing:

  • 2.5+2.5= 5 liters. 5+5 = 10 liters, 18+18 = 36 liters.

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard