Varnish acrylic wood paint

Varnish acrylic wood paint

for interior and exterior painting

In a variety of transparent shades of natural wood and a variety of 12 shades

Acrylic varnish for wood in thinner-thinner shades, quick-drying acrylics

Color shades for painting wood Varnish acrylic lacquer for wood in shades thinning-thinner – acrylic, fast drying transparent/various thinning thinner for painting wooden items for protection and decoration as well as to prevent pest gnawing.

BERNISH ACRYLIC fast drying solvent acrylic base lacquer for wooden objects

Varnish acrylic varnish for wood in thinner-thinner shades – varnish in many shades, high quality, protects and beautifies garden furniture, doors, pergolas, etc., one-component and very easy to use, can be applied in internal and external uses. Absorbs into the wood and protects against mold, rot and pests. In a spectacular variety of shades.

Varnish acrylic wood paint

Characteristics:

Extremely strong and seals against rain and moisture and extends the life of the wood product on which it was applied.
High resistance in outdoor conditions.
UV resistance
Protects the wood from weathering and decay.
Tough and resistant to scratches and wear.
Flexible and strong varnish.
Seals salts and water.
quick drying.
Economical, for painting in a thin layer

Acrylic varnish for wood www.denber-paints.co.il

Uses:

For interior and exterior painting of wooden buildings
For painting wooden boxes and pergolas
and for painting wooden garden furniture
and for painting wooden fences

Technical data:

Effective coverage – 1 liter per 10-15 square meters.
Flexibility – 1 mm (sheen)
Density – 0.9-1.0 gm/cm ³
Viscosity – 1000-3000 s (Brookfield)
Stiffness – 3 Dg (Ericsson)
Abrasion – 120 microns – 980 cycles (Gardner) ASTM
Recommended layer thickness – 30-50 wet microns.
Recommended number of layers – at least 2. Each additional layer darkens the final shade that will be obtained.

Acrylic varnish for wood in thinner-thinner shades, quick-drying acrylics

containing:

High-quality acrylates are resistant to extreme outdoor conditions.
Transparent pigments.
Special plasticizers.
Preservatives and protection from pests.
Solvents.
Fungicides.
additives.

variety:

In natural wood tones according to the “varnish” palette.

Lightning:

Silky/glossy.

Touch drying :

10 minutes. (Due to the rapid drying, the prevention during spraying from over spray “dust”)
If “dust” is formed during spraying, retarder should be added and air pressure to the sprayer should be reduced.

Drying between layers:

2-4 hours. Final: 12 hours.

Application methods:

Brushing, rolling, spraying.
Recommended with 4 atm pressure spray.

Dilution:

Brushing/rolling – 10-20% thinner 32
The spray – first layer 30% second layer – 5%. Thinner 18

Area preparation:

Thorough cleaning of dust, grease, dirt and loose paint.
Rubbing with glass wool to remove grains and blowing with air pressure.
Applying a diluted first layer, after drying light polishing with fine sandpaper
Applying a second layer.

packing:

0.75 liters, 2.5 liters, 5 liters, 18 liters.

storage:

In a cool and shady place at room temperature.

Shelf Life:

12 months in the original packaging.

Cleaning tools:

turpentine or thinner 18 at the end of painting.

safety:

Not for food, keep out of reach of children. and
Flammable, away from heat and fire. and
Ensure adequate ventilation during application. and
Wear safety glasses, solvent-resistant gloves, protective clothing. and
In case of injury – seek medical attention immediately. and

warning:

Do not mix with materials not recommended by us. and
Avoiding contact with the skin and eyes, causes dryness and irritation of the skin. In case of contact, wash with plenty of running water and seek medical attention. and

Quality Inspection:

In the laboratories of our factory according to the specification. and
ISO 9001-2015 and

This technical specification is for non-binding general information only. and

Produced by Denber Paints and Coatings Israel Ltd. , and