Spray Silicone Molds release

Spray Silicone Molds release

Silicone oil base release agent

Silicone spray prevents adhesion to molds and allows easy release of the model from the mold.

FOR MOLDS/FORMS RELEASE – nonflammable release spray, prevent models to stick in the mold and helps them release easily.  

Spray Silicone Molds release. www.denber-paints.co.il

Spray Silicone Molds release. www.denber-paints.co.il

Spray Silicone Molds release

Silicone oil base release agent

Features:

  • An extremely high smoothing coefficient prevents the product in the mold from sticking to it and allows the model to be easy to release from the template.
  • Completely transparent leaves no sign due to usage.
  • Easy to implement.
  • High cover.
  • Suitable for many uses.

Uses:

  • Spray on a mold before injection or casting.

Technical data:

  • Theoretical coverage – 1 liter per 20 square meters on a smooth surface.
  • % Solids in volume – 40%
  • Density – 1.0-1.1 gm\cm3.
  • Viscosity – 1-2 Pa.sec (HAAKE)
  • Stiffness – 3 Dg < (Erickson)
  • Recommended layer thickness – 10 dry microns.
  • Number of recommended layers – 1

Spray Silicone Molds release

Silicone oil base release agent

Contains:

  • Emulsive silicone.

Shade:

  • Transparent

Gloss:

  • Silk-Glossy.

Application methods:

  • spraying.

Preparation of area:

  • Thorough cleaning dust, fat, dirt scraps of injection products or casting in a mold.

Packaging:

  • 0.4 liters

Spray Silicone Molds release

Silicone oil base release agent

Storage:

  • In a cool, shady place at room temperature.

Shelf life:

  • 24 months in the original packaging.

Tool cleaning:

  • Diluter 18-D.

Safety:

  • Not edible, out of reach of children.
  • Flammable inside the aerosol tank, away from heat, fire and gases. No longer flammable immediately after it is sprayed.
  • Ensure proper ventilation during application.
  • Wear goggles, solid gloves, protective clothing.
  • In case of injury , seek medical attention immediately.

Caution:

  • Do not mix with materials not recommended by us.
  • Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
  • In contact, rinse with plenty of running water and seek medical attention.
  • Pressure tank – do not puncture or throw it into the fire.
  • Empty before dumping in the trash.

Spray Silicone Molds release

Silicone oil base release agent

Quality review:

  • In our factory laboratories in accordance with specifications.
  • ISO 9001-2015

User’s Attention: This technical specification is for general non-binding information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards

Spray Silicone Molds release

Silicone oil base release agent