Antislip liquid prevents slipping by burning

Antislip liquid prevents slipping by burning

Gentle burn prevents slipping on a wet floor

Antislip antiskid

Non-slip chemical scalding liquid for ceramic floors, porcelain granite and more…

A chemical concentrate with a tiny molecular size to penetrate into the smooth ceramic creates a non-slip surface.

ANTI-SLIP LIQUID TO PREVENT SLIPPERY FROM CERAMIC TILES.

Special transparent liquid for smooth and slippery ceramic and granite porcelain floors. Creates an invisible microscopic burn that turns an extremely smooth and slippery surface into a non-slip safety surface.

Antislip liquid prevents slipping by burning www.denber-paints.co.il

Characteristics:

Penetrates the top shell of the tile.
Burns and creates a non-slip surface.
Completely transparent, washes off easily and leaves no marks.

uses:

To prevent the slippage of ceramic flooring and porcelain granite.

Technical data:

Coverage – 1 liter per 5-10 square meters in a layer of 100-200 wet microns depending on the type of flooring (rough/smooth, small/large gaps).
Density – 1.0-1.2 gm/cm ³ (1475 DIN 51575, ASTM D)
Viscosity – 15 seconds 4#
Flash point – none
% general active substance by volume – 60%
Abrasion – 120 microns – 1560 cycles (Gardner) ASTM
Recommended layer thickness – 100 wet microns
Recommended number of layers – 1-2 according to the infrastructure and required slip prevention.
Recommended contact time with the tile before washing – 15 minutes. Sometimes you have to repeat the operation one more time

Antislip antiskid

containing:

heartburn
Wetting fluids.
acids.
Solvents.
additives.

variety:

Clear

Application methods:

Brushing, scrolling.
Brushing/rolling without thinning
Wait 15 minutes and rinse with water and wipe.
Review – if it is not enough, the burning must be done again.

Area preparation:

Thorough cleaning of dust, grease, dirt.

User manual:

Carefully open the container.
Gloves, goggles, mask and protective clothing are required.
Pour required amount for the treated area – 1 liter per 10 square meters. For flooring with wide gaps 1 liter per 5 square meters.
Spread evenly in a uniform thickness over the area with a roller or squeegee, brush for a small area.
Wait 15 minutes and wash with water and wipe.
Sprinkle water and check the slip level. If further improvement is required, the process must be repeated again.

Ventilation:

Ensure ventilation during application.

packing:

4 liters.

storage:

In a cool and shady place at room temperature with adequate ventilation.
Make sure lids are tightly closed.

Shelf Life:

24 months in the original packaging.

Cleaning tools:

water.

safety:

Not for food, keep out of reach of children.
Ensure adequate ventilation during application. If there is a lack of oxygen, take care of forced ventilation or masks connected to an oxygen source. (see ventilation data above)
Wear safety glasses, acid-resistant gloves, protective clothing, a mask suitable for filtering acid vapors.
Avoid contact with the skin and eyes which causes irritation and dryness, in case of injury – seek medical attention immediately.
Be sure to carefully read and apply the safety instructions, be sure to undergo refresher training with a safety officer/supervisor once a month.

warning:

Do not mix with materials not recommended by us.
Avoid contact with skin and eyes, causes dryness and skin irritation. In case of contact, wash with plenty of running water and seek medical attention.

Quality Inspection:

In the laboratories of our factory according to the specification.
ISO 9001-2015

This technical specification is for non-binding general information only. and

Manufactured by Denver Paints and Coatings Israel Ltd. , P.O. Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the ISO 9001-2015 standard

Epoxy and polyurethane floors are done by the Denver experts