Tutgum chlorinated rubber 3333

Tutgum chlorinated rubber 3333 chemicals resist

For an acidic/marine environment, multi-thickness, primary and intermediate red/brown.

Primer for marine containers prevents rust in a humid, salty atmosphere

Chlorinated rubber base totagum 3333 for chemicals www.denber-paints.co.il

Chlorinated rubber base totagum 3333 for chemicals www.denber.net

One-component paint based on highly concentrated chlorinated rubber, fast drying, multi-thickness and multi-solids, for direct painting on iron, polished galvanized sheet metal for protection from corrosion in a corrosive environment such as sea water and an acidic atmosphere. For painting marine containers, ship parts, structural iron parts and machinery in the chemical industry, free of chromates and lead.

Tutgum 3333 primer for iron metals in corrosive environment high build paint , with high concentration of chlorinated rubber fast drying for sea water and chemical environment

Base color for marine containers www.denber.net

Characteristics:

Resistant for years in corrosive environmental conditions such as sea water and chemical atmosphere.
Anticorrosive prevents rust, especially washable.
Very strong adhesion to iron, and polished galvanization (which is not shiny)
Fast drying and thick, can be applied in several layers to obtain the desired thickness for long-term protection. The waiting time between layers is short due to the fast drying.
Excellent connectivity between layers.
The chlorinated rubber prevents the passage of acidic or salty air vapors.
Prevents the development of rust in iron and oxidation in galvanized tin.
Resistant to heat and cold and extreme marine conditions in salty seawater and fresh water.
Flexible and strong.
Easy to apply by spray/roller.
Decorative and used as a final finishing layer. Base and top in the same color.
Hard, resistant to scratches and shocks.

uses:

For industrial and professional use only. 3333 is used as a base, 3334 is used as a top.
Painting all types of metals as well as wood and walls of all kinds in a marine environment, for sealing and protection.
For painting marine containers.
As a quick-drying base and top coat for general use and especially in the atmosphere of chemicals in industrial plants.
For painting corrugated tins and galvanized corrugated tins in buildings near the sea and in industrial plants.
for painting machinery in industry.
For painting train cars, boats and ship parts.

Primer for marine containers prevents rust in a humid, salty atmosphere

Technical data:

Theoretical coverage capacity – 1 liter per 15-20 square meters
Practical consumption for each layer of 100 microns – 150 milliliters of paint per square meter to obtain a 100 micron dry layer (the minimum required).
Recommended number of layers – 1-2
% solids by volume – 60% (T.I. 785 part 17).
Pigment content in the color – 45% (Ti 785 part 19)
Adhesion – criss cross cut “0” test (T.I. 785 part 27 film 50 micron 7 drying days)
Flexibility – 1 mm (sheen) passes the test of Israeli standard 935 section 307.
Grinding minutes – up to 50 microns (Ti 785 part 15 – up to 60 microns)
Density – 1.1-1.4 gm/cm ³
Recommended layer thickness – 150-180 wet microns.
Flash point – 25 ^O C

variety:

red / brown.
gray

Lightning:

Mat, (T.I. 935 section 309).

packing:

2.5 liters, 5 liters, 18 liters, 200 liters.

This technical specification is for non-binding general information only. and

Produced by Denber Paints and Coatings Israel Ltd

For the full specification: Tutgum chlorinated rubber base 3333 for chemicals