Siloxan 290 polysiloxan sealer. Denber paints and coatings

Siloxan 290 polysiloxan sealer

Sealer polysiloxan for walls

Siloxan 290 polysiloxan sealer. www.denber-paints.co.il

Clear siloxane penetration primer, water repellent for impregnating wallsfloors for deep humidity wall isolation.

Clear liquid based on clear siliconic siloxani that has a small molecular structure that enables deep penetration and absorption into the wall/floor without changing the natural look of the surface. Penetrates deep into the infrastructure strengthening and sealing it. Creates a clear layer that seals and enables breathing that is repaintable if desired. Protects plaster, natural and artificial stone, cement, marble, mosaic and granulitic walls, all types of tiles; terracotta, marble, granite and cement from water and dirt penetration. Strengthens, seals and improves erosion endurance.

Siloxan 290 polysiloxan sealer

Sealer polysiloxan for walls

Qualities:

Penetrates deep into the infrastructure and strengths it.
Seals and enables breathing.
Prevents rain penetration into all types of floors and walls.
Clear and doesn’t changes the surfaces natural color. Isn’t sticky after it dries.
Prevents old walls from continuous deterioration and prevents crumbling cement of granulitic floors.
Enables painting walls with Denbetex and Denbergloss. Has strong resistance against alkali materials.
Has erosion endurance for granulitic floors, tiles and etc. Endures UV rays.

Purposes:

Excellent clear seal for walls and buildings that are made from plaster, cement, natural stone that are exposed to the rain.
Protects antique and historical buildings.
Coats roof tiles.
Seals gaps in open balcony tiles.
Seals marble, granite, and ceramic tiles in walls and floor.
Seals work surfaces in kitchens.

Technical specifications:

Theoretical coverage area: 8 sqm per liter for smooth surfaces. It is emphasized that it is required to spray or spread while the Sealer is still wet until the surface can’t absorb any more.
Flexibility: 1 mm (SHEEN)
Density: 0.95 gm cm³

Siloxan 290 polysiloxan sealer

Sealer polysiloxan for walls

Surface requirements:

Type of surface	Cover area per liter (sqm meters)
Chalk stonePlasterCement Plaster cement	2-3 4-5
	5-7
Sorav	4-6
Jerusalem stone	5-7
Silicone stone	3-4
Sulfate wall	4-5
Roof tops terracotta	6-7
Gravel	3-4

Viscosity: 30-40 CPS (Brookfield)
Rigidity: 2 Dg (ericson)

Contains:

Siloxan sealant silicone.
Solvents, additives.

Siloxan 290 polysiloxan sealer

Sealer polysiloxan for walls

Shades:

Clear

Gloss:

Silk

Touch-dryness:

2-4 hours.

Drying time period between layer application:

6 hours. Final: 12 hours. Step able: 24-72 hours according to the width and temperature.

Effective water repelling at:

16 hours. Maximum repellent ability after 7 days.

Application methods:

Spray, roll and brush.
When rolling or brushing it is required to repeat the process a number of times until reaching full wetness capability of the surface.
When spraying it is required to spray until reaching full wetness capability of the surface.

Siloxan 290 polysiloxan sealer

Sealer polysiloxan for walls

Dilution:

No dilution needed, spray at low pressures.

Surface preparations:

Clean walls and floors with water pressure, natural walls clean with at least 150 atm.
Dry and repair the walls or floors if required.
Floor tiles gaps should be opened with a suitable tool such as a knife or screwdriver.(also in tiled and marble walls)
Fill the gaps with a grout.
After waiting 2 days apply the Siloxane 290 on the clean and dry surface. Shake well the Siloxane 290 container before use.

Packaging:

5 liters or 18 liters.

Storage:

In a shaded and cool place at room temperature.

Shelf life span:

12 months in its original package.

Equipment cleansing:

Use mineral turpentine immediately after usage.

Siloxan 290 polysiloxan sealer

Sealer polysiloxan for walls

Safety precautions:

Not eatable, keep from the reach of children.
Flammable, keep distant from heated areas, fires, flames, and sparks Wear protective glasses, gloves and suits.
Check that there is enough air while applying.
In case of an injury immediately get doctors assistance.

Warnings:

Don’t mix with other substances that are not recommended by us.
Don’t apply while it is raining.

Quality control:

ISO 9001-2015
In our factory’s laboratories under these standards.

Safety precautions:

Not eatable, keep from the reach of children.
Flammable, keep distant from heated areas, fires, flames, and sparks. Prohibit smoking in the work area.
Check that there is enough air while applying. In case there is not enough air, uses ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact with the paint and thinner from the eyes and skin. In case of contact, immediately wash thoroughly with water.

In case of an injury immediately get doctors assistance. Read the safety instructions on the labels.

Siloxan 290 polysiloxan sealer