Zinc Silicate SAE-AMS-P-38336
Cold galvanization anticorrosive primer for high temperature

Zinc Silicate SAE-AMS-P-38336. www/denber-paints.co.i
A SPECIAL ANTICORROSIVE TWO COMPONENTS PRIMER PAINT, BASED ON UNORGANIC ZINC SILICATE, TO FORM A PROTECTIVE CATHODIC LAYER ON METAL WITH COLD GALVANIZATION EFFECT WHICH PREVENTING RUST & CORROSION. USEFUL IN HIGH TEMPERATURE (UP TO 540°C).
Quality primer paint with an effect of cold galvanization, which ALUMA SILICON paint may be painted as a top layer on it and together to form a special anticorrosive system, which provides hot temperatures resistance as well as resistance for acid or alkali conditions. The Zinc Silicate may be painted over in colors with top paint such as Epoxyden of Denber (up to 250°C) or Siliciton of Denber (up to 960°C).
Zinc Silicate SAE-AMS-P-38336
Cold galvanization anticorrosive primer for high temperature
Properties:
- Quick drying, ready in 24 hours for re-coating.
- Outstanding adherence ability to iron and concrete.
- Prevents rust development and offers a good cathodic protection.
- It may be applied dry in one layer of 75 microns thickness, and 135 microns thickness wet layer.
- Serves as protective paint for active heating systems up to 540°C.
- Suitable to paint iron or concrete even on hot surfaces, it is not requiring a long stand-still of any active hot installation (up to 540C)
- It hardens by direct contact with the air, and is finally hardened when heated to 200°C.
Applications:
- Useful as anticorrosive Paint for iron metals especially in hot conditions such as active heat emitting systems.
- Painting metal walls and surfaces in steel melting plants.
- Painting large heat deflectors.
- and Painting hot liquid cooling systems for water, oil, etc.
- Steam chimneys and piping for transporting hot liquids.
Technical data:
- Theoretical coverage area: 7 sqm, per 1 liter paint
- Actual painted layer thickness: 35 microns
- Flexibility: 2 mm (SHEEN).
- Density of mixture base with the zinc : 9-2,1 gr/cm3
- Mixture viscosity: 2-4sec (HAAKE).
- Hardness: > 3 Dg (Ericksen).
- Recommended layer thickness 75 microns dry or total of 135 microns wet.
- Recommended number of layers: one layer 135 microns thickness or 2 thin layers of 70 microns for vertical surfaces (to avoid paint leak).
- % solids: 56% solids in volume and 75% solids by weight.
Zinc Silicate SAE-AMS-P-38336
Cold galvanization anticorrosive primer for high temperature
Contents:
- Zinc silicates
- Fillers, heat resistant pigments
- Flexural materials.
- additives.
- Pure zinc.
Color:
- Grey/cream.
Color:
- Grey/cream.
Gloss:
- Matte.
Touch dry time:
- About 6 minutes at hot temperature.
Drying time between layers:
- 24 hours: final 24 hours.
- Final hardness is reached after 7 days.
Application methods:
- Spraying, brushing.
Zinc Silicate SAE-AMS-P-38336
Cold galvanization anticorrosive primer for high temperature
Thinning:
- Spraying: 5-10% D-21 thinner, 3 atm. pressure.
- Airless: 0-5% D-21 thinner, 5-6 atm. pressure, nozzle 0.0021”.
- Brushing/rolling: 5% D-21 thinner.
Surface Preparation:
- Use mechanical or chemical cleaning until obtaining white metal.
- Use mechanical steel brushes.
- Chemical removal of rust by Denber rust remover 3000 and degreaser M for oil degreasing.
- Sanding grade by sand blasting: SA- 2.5
Packaging:
- Component A 11 kg + component B 25 kg = 36 kg (18 liters).
Storage:
- At room temperature (15oC-25oC) in a shaded & dry place.
Shelf Life:
- 6 months in its original package.
Tool Cleansing:
- With D-21 immediately after finishing painting.
Zinc Silicate SAE-AMS-P-38336
Cold galvanization anticorrosive primer for high temperature
Mixing and application:
- Do not mix the products with materials which were not recommended by us.
- Part B (the Zinc) is to be added slowly (to avoid granules & lumps) to part A, while mixing carefully in a clean container.
- Zinc tends to oxidize, when exposed to the air or humidity to form granules and lumps. Such lumps should be removed before painting by sieving the mixture through a proper mesh.
- Continue the mixing while painting, don’t stop the mixing to avoid lumps
Quality control:
- In factory laboratories according to specifications.
- COA and COC certificate.
- ISO 9001-2015
Safety precautions:
- Inedible, keep away from the reach of children.
- Flammable – keep distant from heated areas, fires, flames, and sparks, prohibit smoking in working area.
- While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
- Wear protective glasses, gloves and suits.
- Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
- In case of an injury immediately get doctors assistance.
- Read the safety instructions on the labels.
- See M.S.D.S
Zinc Silicate SAE-AMS-P-38336
Cold galvanization anticorrosive primer for high temperature
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- Fire resistance of houses, hardwood and parquet floors, decks also
- Swelling paints for steel protection against fire – Fire retardant paint also
- Epoxy floor coating in casting and painting also
- Crystal epoxy resin for tables also
- To the article Sealing also
- The complete article on the sealing materials for roofs and walls also
- Sealing the floor of the balcony, terrace from rain also
- Mold, how to remove mold correctly and how to fight mold also
- “Sick” buildings – Antibacterial paints Bacterinoll/ Tutgum Bacterinol also
- Paint for aircraft Denbergloss Jets also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Denbergloss Clear also
- Varnish for wood. How to choose the right varnish for wood also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- For a free consultation, call Denber – Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794