Bacterinoll Bio wall paint

Bacterinoll Bio wall paint

Bacterinoll Bio wall paint

Bacterinoll Bio wall paint

Antibacterial silver ions biocide paint

Unique acrylic paint that kills and prevents fungus , rot and mold development and serious infectious diseases such as swine flu MRSA , E. coli bacteria E coli and more…
Prevents the development of bacteria and disease-carrying microorganisms causes mildew and odors.

Tested and approved in the UK laboratories IMSL MICROBIOLOGOCAL SERVICES LTD . Test No. 1013627,55 / 4515 Test No. 1013627,49 / 4510

Unique development – paint for walls and ceilings, partitions, hoods, contains extracts of pure silver and biocides among the most advanced in the world. For use in operating rooms , emergency rooms , hospitals, HMOs , food factories, restaurants, kitchens, kindergartens and schools, microbiological laboratories, research laboratories, poultry houses and livestock , slaughterhouses , meat processing plants , vegetables and food , etc.


  • Anti-bacterial, kills bacteria and prevents diseases, acts as a catalyst paralyzing the enzyme used in oxygen metabolism of bacteria, viruses (viruses) and fungus (are single-celled and can not exist in his environment) and are killed.
  • Prevents mold, rot, fungus, mildew, odors
  • Odorless, water-based, easy to apply.
  • Blocks moisture and allows evaporation (“breathing wall”)
  • Very washable and durable scrubbing
  • Excellent adhesion capacity infrastructure
  • White and shades.


  • Painting walls, ceilings, partitions, hoods, wet rooms, bathrooms, etc
  • Operating rooms, hospitals and HMOs, clinics, waiting rooms, etc.
  • Poultry farms, dairy farms, growth chambers and research animals, etc.
  • Kindergartens, schools, children’s rooms, etc.
  • Manufacturing plants and food processing, kitchens, restaurants, slaughterhouses, etc.
  • Microbiological laboratories, research laboratories, pharmacies, pharmaceutical plants, etc.
  • Bathrooms and general public in particular, showers, etc.
  • Basements, wineries, meeting refrigeration, food stores, etc.

Technical data:

  • Coverage – 1 liter to 5-10 m2
  • Viscosity – 7-11 Pa.sec (Haake)
  • Flexibility – 1 mm (Sheen)
  • Density – 1.4-1.5 gm \ cm3
  • Hardness – 3 Dg (Ericsson)
  • Erosion – 120 micron – 500 cycles (BYK Gardner) ASTM
  • Scrubbing resistance – minimum 200 cycles according to Israeli Standard 1945
  • Recommended layer thickness – 40-60 microns.
  • Multiple layers recommended – 2-3.


  • Fine acrylic emulsion.
  • Fillers, pigments.
  • Materials for advanced flexibility.
  • Advanced fungicides, pure silver, preservatives.
  • Self-Leveling wetting materials.
  • UV resistance improvers.
  • Thixotropic film and other additives.

Bacterinoll Bio wall paint


  • Bright white, shades according Standard Dnbercryl catalogue.
  • Catalog of 1000 shades.

Bacterinoll Bio wall paint


  • Mate.

Dry to the touch:

  • 3 minutes. (Due to the fast drying time, avoid splashing from over spray “dust”)
  • If “dust” was created while splattering, add water and reduce air pressure sprayer.

Drying between layers:

  • Final 12 hours.

Application methods:

  • Brushing, rolling, spraying (spray gun or airless).


  • With water.
  • First layer – 20-30%
  • Second layer – 5-20%

Surface preparation:

  • Cleaning from dust, grease, dirt and loose paint.
  • Renewal of an external wall – pressure water wash 150  atm.
  • Filling holes and cracks with Denber Acrylic Schpachtel with trowel and sand for smoothing.
  • Spraying primer Denberol super.
  • If the old paint peeled off, remove it completely and spread a layer of Denbercryl 4000 diluted 30% with water.
  • If the wall is crumble – spread a layer of denbertex primer.
  • Renewing interior walls – fill holes and cracks with denberschpachtel and sand with sandpaper for smooth surface, remove dust and spread a layer of  Denberol or better smear layer of Denbercryl 4000.


  • Internal wall – Denberol super or Denbercryl 400,
  • External wall – in good condition – Denberol super or Denbercryl 4000 and when old, crumbling wall to be painted with primer “Denbertex Primer”.


  • 2.5 liters, 5 liters, 18 liters.


  • In a cool shaded place in room temp with appropriate ventilation.
  • Keep lid hermetically sealed.

Shelf life:

  • 12 months in original package.

Tools cleaning:

  • Water and soap at the end of painting.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S


  • Don’t mix the product with materials which were not recommended by us.
  • Don’t apply if the temperature is under +7°C.
  • Don’t apply if humidity is over 80%
  • When applying with Airless, do not aim it at anybody a direct hit could be fatal at pressures over 150 atm.
  • Read thoroughly the technical data of the product listed in this section; confirm that everything is understood completely, for clarification contacts our tech. department.
  • All information that is listed in this content is a recommendation merely and cannot be applied in the court of law.
  • The costumer must test & check that this product is compatible with his equipment and needs.
  • The information listed in this section is according to the laboratory conditions (temperature, humidity etc.) which the products were tested.
  • The recommendations listed do not hold any responsibility for this product.
  • Theoretical and actual coverage area are different concepts, the actual coverage is affected by the required thickness of the layers, required number of layers, painting conditions including the amount of paint which spread in the air before touching the surface.
  • The information listed in this section is based on experience and accumulating data, Denber inc., has the right to change the information listed at any time.
  • Paints that have been in stagnation or exposed to air more than needed could have their qualities changed.


  • Storage room temperature 15°C to 25°C.
  • Over Spray: An effect which occurs in the spraying of paints application. A type of “dust” is created by dry gases of the air, which causing the paint particles to fall dry on the surface (hereafter the “effect”). The impact of this “effect” becomes stronger due to over pressure and heat, (most sprayers have a lever to control the   pressure) To avoid the negative impact 0f the “effect”, the pressure of the spraying should be lowered to the necessary minimum!. Another possibility is to increase the amount of the thinner in the mixture which would cause the paint particles to fall wetter on the surface.

An additional recommended possibility, to avoid this “effect”, is to add a retarder to the mixture which increases the duration period of the painting application , avoiding the paint to  dry up, and enabling it to reach the surface wetter, Thus a better painted smooth  layer is formed.

  • Pot Life: The working time which is possible to paint a mixture of two components, A+B (or more) without spoiling the qualities of the paint or disqualifying the paint as “out of use”.
  • Spray: It is possible to spray with a sprayer that has a container holding the paint that sprays it with air pressure.
  • Airless: a device with a piston which compresses the air for spraying paints. The pressure might be high (over 100atm.) Don’t aim it at anyone
  • Surface preparations: the level of cleanness is determined by international standards. Surface preparations, including cleansing sand blasting, is important & critical factor in achieving an optimal result for painting adhesion on a certain surface. These standards are equally compared to the standards of the Swiss SA, the German-Din the U.S SSPC SP For each standard in any level there are indicators, for sale, in order to make visual comparison between the cleansing of the surface and the indicator.

Quality inspection:

  • Prior to the painting on large surfaces it is important to test the product on a small area, to be sure that the paint is compatible with the level of satisfactory.
  • Laboratory testing was made according to the standards institution specifications.
  • This “Data sheet” given as noncommittal information, the product above recommended for professional painting specialists. This information is not a substitute to personal guidance.
  • You must read the MSDS safety instructions before you start working with the product.