Primer Sealer sanding sealer

Primer Sealer sanding sealer

Wood sealer clear, sand able

Primer Sealer sanding sealer www.denber-paints.co.il

Primer Sealer sanding sealer www.denber-paints.co.il

Clear Primer sanding sealer for wood lacquers easy polishing

Nitrocellulose hard primer for wood, easy polishing, first coat layer for filling and sealing the wood before coating it with lacquers.

Properties:

  • Dries quickly and clear.
  • Seals and hardens.
  • Durable in harsh climate conditions.
  • Has high adhesion ability to wood.
  • Excellent primer for first coat for synthetic, nitro, melamine alkyd, and polyurethane lacquers.
  • Has scratch and erosion durability. Single component, easy to apply.

Primer Sealer sanding sealer

Wood sealer clear, sand able

Applications:

  • For first coating furniture and wooden objects
  • Before coating lacquers. For parquet floors.

Technical specifications:

  • Theoretical coverage area: 15 sqm per liter.
  • Actual coverage area: 5 sqm per liter.
  • Recommended layer thickness: 40 mic.
  • Recommended number of layers: 2-3
  • Density: 9-1.0 gm/cm 3
  • Hardness: >3 Dg (Ericson)
  • Flexibility: 2 mm (Sheen)
  • Viscosity: 8-1.2 Pa.sec (Haake)

Contains:

  • Nitro base solution.
  • Special flexible alkyd.
  • Sandable powder filler.
  • flexibility and additional substances.

Shade:

  • Translucent yellowish.

Gloss:

  • Matte

Primer Sealer sanding sealer

Wood sealer clear, sand able

Touch-dry time:

  • 6-10 minutes

Drying time period between layer applications:

  • 60 Final: 12 hours. For polish: 6-24 hours according to the temperature.

Application methods:

  • Spray, dip, brush or roller.

Dilution:

  • Brushing: 25%-35% using only the D-21 thinner.
  • Dipping: 100% D-21 thinner.
  • Spraying: 35% D-21 thinner.
  • Airless: 15%-20% D-21 thinner.

Surface preparations:

  • Polish the natural wood with sandpaper and remove all the Spread beach with the desired shade and lightly polish.
  • Spread a layer of Primer Sealer and polish after it dries.
  • Spread a second layer of Primer Sealer and polish after it dries in order to get a smooth and sealed surface.

Primer Sealer sanding sealer

Wood sealer clear, sand able

Instructions:

  • Clean the wood after polishing it.
  • Stir the Primer Sealer well adding the required amount of D-21 thinner.
  • Apply a very thin layer. A thick layer would affect its flexibility and cracks could form.
  • Spraying: ensure that low pressure is used while spraying close to the surface .
  • After the first layer has finished absorbing and drying, polish with sandpaper and remove all the particles after polishing.
  • Apply another layer covering all the surface and wait until it completely dries.
  • Polish again until a smooth and sealed coat is Don’t polish too hard in order not to remove all of the Primer Sealer.

Packaging:

  • 1 liter, 2.5 liters, 5 liters, 18 liters.

Storage:

  • In a shaded and cool place at room temperature with appropriate ventilation.
  • Keep lid hermetically sealed.

Shelf life span:

  • 12 months in its original can.

Primer Sealer sanding sealer

Wood sealer clear, sand able

Equipment cleansing:

  • D-21 thinner.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Primer Sealer sanding sealer

Wood sealer clear, sand able