Spray Zinc Silicate 600oC
Primer high temperature enrich with zinc
High temperature anticorrosion zinc rich primer Ethyl silicate paint for 540oc SSPC PAINT 20 Type II – Organic.
Industrial primer paint based on special silicone resins with pure zinc as primer for high heat emitting elements up to 600 degrees, for cold galvanization, for high quality cathode anti-corrosive protection for chimneys, ovens, heat exchangers, turbines, etc. And as primer before painting top layer of Aluma silicone as system for 600°C.

Spray Zinc Silicate 600oC. www.denber-paints.co.il
Spray Zinc Silicate 600oC
Primer high temperature enrich with zinc
Features:
- High-quality cathode protection to prevent rapidly developing rust in high-heat emitting bodies.
- Resistant to high heat up to 600 degrees.
- Primer paint fast drying in the air, final hardness only after heating to 200 degrees.
- Resistant to humid environments (as part of a system after Aluma silicon coating).
- Suitable for internal and external use.
- High adhesion capacity to metal and concrete infrastructure
Uses:
- Primer paint before painting in Aluma silicone.
- High-quality anticorrosive cathode protection for high heat resistance.
- For painting heat-emitting elements such as steel mills, ovens, chimneys, etc.
Technical data:
- Theoretical coverage – 1 liter per 7 square meters on a smooth surface.
- Consumption – 135 microns wet leaves 75 microns dry. 1 kg to 3-3.5 sqm.
- Flexibility – 2 mm (sheen).
- Solids – 60-65%
- viscosity – 2-4 (HAAKE).
- Stiffness – 3 Dg (Erickson) after 30 seconds in the oven 200 degrees.
- Recommended layer thickness -75 dry microns which are 135 microns wet.
- Number of layers recommended – 1 thick of 135 microns wet and if there are leaks due to vertical painting or sharp inclines, can applied 2 layers of 70 microns wet 24 hours apart.
Spray Zinc Silicate 600oC
Primer high temperature enrich with zinc
Contains:
- Silicone resins Ethyl silicate.
- Fillers.
- Special flexible materials.
- Solvents, additives.
- Pure zinc.
Hue:
- Zinc gray.
Gloss:
- Matt.
Drying to the touch:
- 0.5 hours. 6 minutes on a hot element.
Drying between layers:
- 2-4 hours. Final:24 hours at Room Temperature.
- Final hardness – 7 days
application methods:
- Spraying.
Spray Zinc Silicate 600oC
Primer high temperature enrich with zinc
Surface preparation:
- Sand blast cleaning should be performed until white metal 2.5 – SA level.
- Various mechanical erosion can be performed but the level of field preparation for painting will not decrease from 2.5 – SA.
- In sensitive flammable places work with bronze brushes, 2.0 – SA can be closely supervised by all grinding processes.
- Thorough cleaning dust, fat, dirt and loose color.
To use:
- Well shake the aerosol container for at least 2 minutes
Packing:
- 0.4 liters.
Storage:
- In a cool, shady place at room temperature.
Shelf life:
- 12 months in the original packaging.
Tool Cleaning:
- Diluted 21-D at the end of painting.
Spray Zinc Silicate 600oC
Primer high temperature enrich with zinc
Safety:
- Not edible, out of reach of children.
- Flammable, away from heats, fire and sparks.
- Ensure proper ventilation during application.
- Wear goggles, solid gloves, protective clothing.
- In case of injury , seek medical attention immediately.
Caution:
- Top color must be painted on it for oxidation resistance, zinc is exposed to a damp/corrosive atmosphere that oxidizes and breaks down quickly.
- Do not mix with unsalted ingredients.
- Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
- In contact, rinse with plenty of running water and seek medical attention.
Quality review:
- In our factory laboratories in accordance with specifications.
- ISO 9001-2015
User’s Attention:
This technical specification is for general non-binding information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards
Spray Zinc Silicate 600oC
Primer high temperature enrich with zinc
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- Fire resistance of houses, hardwood and parquet floors, decks also
- Swelling paints for steel protection against fire – Fire retardant paint also
- Epoxy floor coating in casting and painting also
- Crystal epoxy resin for tables also
- To the article Sealing also
- The complete article on the sealing materials for roofs and walls also
- Sealing the floor of the balcony, terrace from rain also
- Mold, how to remove mold correctly and how to fight mold also
- “Sick” buildings – Antibacterial paints Bacterinoll/ Tutgum Bacterinol also
- Paint for aircraft Denbergloss Jets also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Denbergloss Clear also
- Varnish for wood. How to choose the right varnish for wood also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- For a free consultation, call Denber – Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794