Varnish acrylic wood paint
for interior and exterior painting
In a variety of transparent shades of natural wood and a variety of 12 shades
Acrylic varnish for wood in thinner-thinner shades, quick-drying acrylics
Color shades for painting wood Varnish acrylic lacquer for wood in shades thinning-thinner – acrylic, fast drying transparent/various thinning thinner for painting wooden items for protection and decoration as well as to prevent pest gnawing.
BERNISH ACRYLIC fast drying solvent acrylic base lacquer for wooden objects
Varnish acrylic varnish for wood in thinner-thinner shades – varnish in many shades, high quality, protects and beautifies garden furniture, doors, pergolas, etc., one-component and very easy to use, can be applied in internal and external uses. Absorbs into the wood and protects against mold, rot and pests. In a spectacular variety of shades.

Varnish acrylic wood paint
Characteristics:
- Extremely strong and seals against rain and moisture and extends the life of the wood product on which it was applied.
- High resistance in outdoor conditions.
- UV resistance
- Protects the wood from weathering and decay.
- Tough and resistant to scratches and wear.
- Flexible and strong varnish.
- Seals salts and water.
- quick drying.
- Economical, for painting in a thin layer

Acrylic varnish for wood www.denber-paints.co.il
Uses:
- For interior and exterior painting of wooden buildings
- For painting wooden boxes and pergolas
- and for painting wooden garden furniture
- and for painting wooden fences
Technical data:
- Effective coverage – 1 liter per 10-15 square meters.
- Flexibility – 1 mm (sheen)
- Density – 0.9-1.0 gm/cm 3
- Viscosity – 1000-3000 s (Brookfield)
- Stiffness – 3 Dg (Ericsson)
- Abrasion – 120 microns – 980 cycles (Gardner) ASTM
- Recommended layer thickness – 30-50 wet microns.
- Recommended number of layers – at least 2. Each additional layer darkens the final shade that will be obtained.
Acrylic varnish for wood in thinner-thinner shades, quick-drying acrylics
containing:
- High-quality acrylates are resistant to extreme outdoor conditions.
- Transparent pigments.
- Special plasticizers.
- Preservatives and protection from pests.
- Solvents.
- Fungicides.
- additives.
variety:
- In natural wood tones according to the “varnish” palette.
Lightning:
- Silky/glossy.
Touch drying :
- 10 minutes. (Due to the rapid drying, the prevention during spraying from over spray “dust”)
- If “dust” is formed during spraying, retarder should be added and air pressure to the sprayer should be reduced.
Drying between layers:
- 2-4 hours. Final: 12 hours.
Application methods:
- Brushing, rolling, spraying.
- Recommended with 4 atm pressure spray.
Dilution:
- Brushing/rolling – 10-20% thinner 32
- The spray – first layer 30% second layer – 5%. Thinner 18
Acrylic varnish for wood in thinner-thinner shades, quick-drying acrylics
Area preparation:
- Thorough cleaning of dust, grease, dirt and loose paint.
- Rubbing with glass wool to remove grains and blowing with air pressure.
- Applying a diluted first layer, after drying light polishing with fine sandpaper
- Applying a second layer.
packing:
- 0.75 liters, 2.5 liters, 5 liters, 18 liters.
storage:
- In a cool and shady place at room temperature.
Shelf Life:
- 12 months in the original packaging.
Cleaning tools:
- turpentine or thinner 18 at the end of painting.
safety:
- Not for food, keep out of reach of children.
- Flammable, away from heat and fire.
- Ensure adequate ventilation during application.
- Wear safety glasses, solvent-resistant gloves, protective clothing.
- In case of injury – seek medical attention immediately.
warning:
- Do not mix with materials not recommended by us.
- Avoiding contact with the skin and eyes, causes dryness and irritation of the skin. In case of contact, wash with plenty of running water and seek medical attention.
Quality Inspection:
- In the laboratories of our factory according to the specification. also
- ISO 9001-2015 also
This technical specification is for non-binding general information only.
Produced by Denber Paints and Coatings Israel Ltd. ,
Acrylic varnish for wood in thinner-thinner shades, quick-drying acrylics
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- Fire resistance of houses, hardwood and parquet floors, decks also
- Swelling paints for steel protection against fire – Fire retardant paint also
- Epoxy floor coating in casting and painting also
- Crystal epoxy resin for tables also
- To the article Sealing also
- The complete article on the sealing materials for roofs and walls also
- Sealing the floor of the balcony, terrace from rain also
- Mold, how to remove mold correctly and how to fight mold also
- “Sick” buildings – Antibacterial paints Bacterinoll/ Tutgum Bacterinol also
- Paint for aircraft Denbergloss Jets also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Denbergloss Clear also
- Varnish for wood. How to choose the right varnish for wood also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- For a free consultation, call Denber – Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794