Schlicht Acrylic bright colours
Decorative coating for exterior walls
Applied with the help spatula and provides flat textured walls.
DECORATIVE COATING PASTE FOR INTERIOR/EXTERIOR WALLS
Schlicht Acrylic bright colours
Decorative coating for exterior walls
Produced in various shades and with different sized aggregates to provide original appearance and a sealing layer to prevent the penetration of water. The product is produced according to Israeli standard 1731 to bridge on cracks up to 1mm. The product is produced in six textures with accordance to the aggregates size:
Especially delicate – 300, medium-small – 400, medium – 500, medium-large – 700, rough -900 , very rough -1300 .
Properties:
- Flexible coating to bridge capillary cracks.
- Fills cracks and seals them.
- The coating is produced in various decorative & natural shades.
- Smoothing the walls and covering the differences.
- “Breathing” & sealing coating, preventing the penetration of water & moisture but allows the air to pass through.
- Excellent adhering to the infrastructure.
- The product Enables multi thickness layers, which smoothing and embellishing the appearance of the walls after the plastering.
- Easy to apply, dries quickly enables re coating within a few hours.
- Economical coating, high coverage area.
- Protecting against fungus and moulds.
- Endurable for many years, the coating is resistant to the outside conditions.
Applications:
- Forming top decorative layer, for coating and sealing new buildings as well as old once.
- For bridging capillary cracks in problematic walls.
- For coating and smoothing plastered walls.
Schlicht Acrylic bright colours
Decorative coating for exterior walls
Technical data:
- Effective coverage for exterior smooth walls:
Sort of aggregate | 300 | 400 | 500 | 700 | 900 | 1300 |
consumption kg. pre sqm. | 2.00-2.250 | 2.100-2.650 | 2.500-2.800 | 2.350-2.750 | 2.850-3.250 | 3.400-3.850 |
- Flexibility – 1 mm (sheen)
- Density – 1.3-1.5 gm/cm3
- Viscosity – 40,000 cPs (brookfield)
- Hardness – > 10 Dg (erichsen)
- Touch dry time – 1-3 hr.
- Erosion – 120 mic. film 1100 cycles (byk gardener)
- Recommended layer thickness – 500 mic.
- Recommended number of layers – 1
Contains:
- Special flexible acrylate.
- Fillers, pigments.
- Flexible materials.
- Penetration materials.
- Additives.
Colors:
- Natural shades and many pastel colors.
Schlicht Acrylic bright colours
Decorative coating for exterior walls
Gloss:
- Matte
Touch dry time:
- 1-3 hr.
Dry time between coats:
- 24 hr. Final – 72 hr.
Implementing method:
- Smear with spatula up and down and from side to side to get a flat smooth layer
- Attach plastic spatula to the surface and in round movements get the desired picture model.
- The spatula should be deepen in water from time to time so the spatula will not stick to the surface while moving on it in cycles to create the drawing figure wanted.
- To get rough old view use a wet sponge.
Dilution:
- Water, add only if the colorful schlicht is dry and hard to implement.
Surface preparation:
- Removal of dust, dirt, grease and shaky paint/
- Clean with high pressure (150-200 atm.) water spray and wait for drying.
- Sand with glass paper to remove grains and remove dust with air pressure.
- Fill holes and cracks with Denber schpachtel acrylic.
- Big cracks – open and clean and fill with “polyflex mastic”.
Schlicht Acrylic bright colours
Decorative coating for exterior walls
Primer:
- Denbertex primer, a solvent primer, should be applied with roller or spray, consumption 200-250 gr. Per sqm.. a complete dry of 1-8 hr. should be achieved before starting applying the colorful schlict.
Packing:
- 18 liter = 24 kg.
Storage:
- In cool shaded place with room temp. with appropriate ventilation.
- Keep lid hermetically sealed. If some material left in the can – cover with water, close lid tight and store.
Shelf life:
- 12 months in original package.
Tool cleaning:
- With water and soap.
Quality control:
- In factory laboratories according to specifications.
- COA and COC certificate.
- ISO 9001-2015
Schlicht Acrylic bright colours
Decorative coating for exterior walls
Safety precautions:
- Inedible, keep away from the reach of children.
- While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
- Wear protective glasses, gloves and suits.
- Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
- In case of an injury immediately get doctors assistance.
- Read the safety instructions on the labels.
- See M.S.D.S
Schlicht Acrylic bright colours
Decorative coating for exterior walls
- Visit our sites: www.denber-paints.co.il
- www.denber-colors.co.il
- Varnish for wood. How to choose the right varnish for wood
- Thermal isolation Thermoseal 200 energy saving in green construction
- Crystal epoxy resin for tables
- Fire resistance of houses, hardwood and parquet floors, decks
- Sealing the floor of the balcony, terrace from rain
- Thin floor nano-coverings for industrial refrigerators and freezers
- Epoxy floors – Benefits of epoxy floors
- Swelling paints for steel protection against fire – Fire retardant paint
- As part of the restoration of buildings – concrete restoration at the Yad Kennedy site
- Paint for aircraft Denbergloss Jets
- Complicated sealing based on innovative technologies
- Reconstruction project of a unique house (Israeli house of architect Gaudi); Renovation of condominiums
- The work on the floor covering and restoration of the sports hall has been completed
- Denber has developed an innovative solution for thermal insulation works
- Mold, how to remove mold correctly and how to fight mold
- “Sick” buildings – Antibacterial paints destroys viruses / bacteria – Bacterinoll/ Tutgum Bacterinol
- Denber – floor coating using epoxy and polyurethane – find out what is suitable for you epoxy floor or polyurethane floor
- Epoxy floor coating and epoxy paints