Tutgum Galvanized white/grey Primer. Denber paints and coatings

Tutgum Galvanized white/grey Primer

Primer for galvanize steel

Tutgum Galvanized white/grey Primer. www.denber-paints.co.il

High build, white, primer & top coat for galvanized steel. A single component primer paint, Based on unique acrylic solvents co-polymers, with white zinc phosphate pigment and white oxide magnesium. Provide excellent adhesion for galvanized steel, Does not affected from the repulsiveness of the zinc that made between the galvanization and other paints.

Properties:

High build, Applicable in few layers.
Prevent rust development for long period.
Decorative white, can be implemented as a top coat too.
Fast dry, Can be repainted after 1 hour.
Excellent adhesion ability to galvanization.
Suitable as primer and middle coat in the same paint.
Excellent adhesion ability between layers.
Heat and unregularly outdoor conditions durability.
Fits for sea salt and chemical environments.
For exceptional demands can be implemented in thickness up to 400 mic.
Tough, resistant in scratches, flexible to shocks.

Tutgum Galvanized white/grey Primer

Primer for galvanize steel

Applications:

Communication and eclectic pillars.
Wavy galvanized steel.
Galvanized steel roofs, for whitening and heat decreasing.

Technical data:

Theoretical surface coverage- 1 liter/15-20 m².
Demanded thickness surface coverage- 1 liter/8-10 m².
Recommended number of layers – 2,
Layer thickness: 125 microns.
Flexibility- 1 mm (Sheen).
Viscosity- 2-2.5 Sec (Hakke).
Density- 1-1.4 gr/cm³.
Hardness- over 10 Dg (Erichsen).

Content:

Acrylic co-polymer resins.
Zinc phosphate, Zinc and oxide magnesium.
UV resistance additives.
Pigments, Special flexible materials.
Solvents and additives.

Colors:

White, Produced in variety of shades under order.

Gloss:

Matte, Produced in Silk only for order.

Tutgum Galvanized white/grey Primer

Primer for galvanize steel

Touch-Dry:

20 minutes (Avoid spraying with Over spray). (If formed dust Retarder must be added).

Dry Between Layers:

1-4 hours, Final: 2-6 hours.

Implementing Method:

Brush, Spray, roller

Dilution:

Brush/roller – 5-10% Mineral Turpentine or thinner D-18.
Spray-.15-20% D-18 Thinner, 3-4 pressure.
Airless- 5% D-18, 4-5 pressure, nozzle 0.015″.

Surface preparation:

New galvanization- gently polishing for removal of top zinc salt, and cleaning with Degreezer M for removal of dirt, grease, dust.
Old galvanization- rough polishing in rusty areas for removal of all rust and gentle polish for the rest for removal of top zinc salt, and cleaning with Degreezer M for removal of dirt, grease, dust.

Packing:

5, 1, 2.5, 5 and 18 liters.

Storage:

Store in well shaded place, room temp.

Tutgum Galvanized white/grey Primer

Primer for galvanize steel

Shelf Life:

12 months in original package.

Tools Cleaning:

At the end of the application with D-18 Thinner or Mineral turpentine.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Tutgum Galvanized white/grey Primer