Tutgum TAP orange effect paint. Denber paints and coatings Israel

Tutgum TAP orange effect

Orange effect paint

Tutgum TAP orange effect. www.denber-paints.co.il

Top coat glossy/semi-gloss, strong, decorative fast drying top coat paint for orange effect finish. Solvent dilution paint in unlimited shades, multi-purpose, for coating any surfaces. tough and durable wear and scratch resist.

Properties:

Tap finish – orange effect.
Ready for use on a layer of suitable primer.
Flexible and powerful, produced in any decorative shades.
Excellent adhesion ability.
Easy to apply with a spraying.
Dries quickly.
Resistance to scratches.
UV resistant.

Tutgum TAP orange effect

Orange effect paint

Applications:

For painting industrial machines, safes, etc.
For general purpose painting includes various accessories.

Technical specifications:

Consumption: 100-200 gr/m²
Coverage: 1 liter to 5-10 sqm.
Flexibility: 1 mm (Sheen) (standard 935 part 307)
Solids: 40% (standard 785 part 17)
% pigment in paint: 65% (standard 785 part 19)
Grinding: < 50 micron (standard 785 part 15 < 60 micron)
Density: 1.00-1.25 gm/cm³
Resistance to immersion in water: no bubbles, no softness, no adhesion changes (standard 935 part 312)
Bleeding stability: not less than level 6 according ASTM D-868 and ASTM D-969
Resistance to fuels and solvents: stable according ASTM D-2792-93
Viscosity: 0.5-1.5 Pa.sec (Haake)
Hardness: > 10 Dg (Erichsen)
Erosion: 120 micron film – 1050 cycle (BYK Gardner), ASTM D 4060 200 mic. dry film – loos 2 grams weight to 500 cycles (the standard allows 2.5 grams loss)
Strength to pilling : > 5 kg/cm²
Resistance to heat 70^OC: with no changes in properties or deformation.
Recommended layer thickness: 200-250
Number of recommended layers: 2-3
UV durability: 5 years (accelerated test with exposure to direct sun rays.)

Contains:

Acrylic resin.
fillers
pigments
Special flexibility substances.
Solvents and additives.

Colors:

Any color UV stable from any catalog.

Tutgum TAP orange effect

Orange effect paint

Gloss:

Glossy 80-95% (standard 935 part 309).
Semi-gloss/silk

Touch-dry time:

10-20 minutes (avoid over spray while spraying)
If “dust” is formed while spraying add a retarder.

Drying time period between layers application:

5 hours. Final: 3 hours.

Application methods:

spray,

Dilution:

Spraying: 10-30% D-32 thinner 3-4
Airless: 5-10% thinner D-32 , 5-6 nozzle 0.015”

Surface preparations:

Black steel: Remove rust by sand blast cleaning (level SA-2.5) or by mechanical or chemical cleansing (rust remover 3000) until receiving white metal.
Remove grease thoroughly with Degreazer M
Aluminum: Remove grease with Degreazer M, etch with Antrox 14, and coat with yellow passivation with Passivator 1722.
Galvanized steel: Lightly polish to remove zinc salt and completely remove the galvanized shine, polish with sandpaper or a disk, after removing the shine clean the surface with Degreazer M to completely remove all (Don’t wipe the surface with the same rags, avoid spreading old grease on different parts of the surface)
Old galvanization: Harshly polish to remove rust, lightly polish where zinc salt and shine should be removed, and remove grease with Degreazer M.
Strict supervision is required while preparing the surface according to the instructions, which is the costumer’s complete If the instructions will not be completely fulfilled the paint will peel.
Apply a coat of Tutgum primer universal.

Tutgum TAP orange effect

Orange effect paint

Packaging:

5 liter, 0.75 liter, 2.5 liter, 5 liters, 18 liters.

Storage:

In a shaded and cool place at room temperature with proper ventilation.
Keep lids tightly sealed.

Shelf life span:

12 months in its original can.

Equipment cleansing:

Use D-21 thinner.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Tutgum TAP orange effect