Tutgum Dengal swimming pool paint. Denber paints and coatings

Tutgum Dengal swimming pool paint

For coating and sealing swimming pools.

Single component chlorinated rubber base, standard blue shade. For painting swimming pools made of concrete, fiberglass, aluminum. Suitable for painting swimming pools and reservoirs. Adhere outstandingly to concrete, aluminum and fiberglass. The paint is strong durable and thick topcoat. Fast drying, durable under water in low chlorine dose. Suitable for marking in red and black colors. Forms a sealed membrane which prevents passage of water and do not aloud creating bubbles in the paint film.

Tutgum Dengal swimming pool paint. www.denber-paints.co.il

Dengal swimming pool paint. www.denber-paints.co.il

Tutgum Dengal swimming pool paint

For coating and sealing swimming pools.

Properties:

Ready for use. For painting on suitable primers: on concrete and fiberglass – Epoxyden floor primer, on aluminum – Epoxyden wash primer.
Flexible and strong, decorative in number of colors in addition to blue standard.
Excellent adhesion capacity to the suitable primer coats.
Easy to apply with a brush / roller / spray.
Dries quickly.
Durable in standing water and resist to pressure under deep water.
Excellent sealer.
Hard, scratch durable and shock resistant.
Flexible and not cracked in temperature changes on summer between day and night in direct exposures to the sun.
Can be applied in any weather except in rainy days .
Resistant to chlorine except the pigment hue fading caused only if there is over concentration of chlorine in the water.
Non-toxic and does not emit toxins, suitable for human contact and non-toxic in case drinking the pool water. Can paint with epoxy officially approved by the Standards Institution of Israel for drinking water.

Applications:

For sealing and painting all the various swimming pools.

Tutgum Dengal swimming pool paint

For coating and sealing swimming pools.

Technical specifications:

Theoretical consumption: 1 liter to 5 sqm. in two layers.
Flexibility: 1 mm (Sheen) (standard 935 part 307)
Grinding: < 50 micron (standard 785 part 15 < 60 micron)
Density: 1.10-1.35 gm/cm³
Resistance to immersion in water: no bubbles, no softness, no adhesion changes (standard 935 part 312)
Bleeding stability: not less than level 6 according ASTM D-868 and ASTM D-969
Resistance to fuels and solvents: stable according ASTM D-2792-93
Viscosity: 0.5-1.5 Pa.sec (Haake)
Hardness: > 10 Dg (Erichsen)
Strength in stretching: 75 kg/cm²
Erosion: 120 micro film – 1050 cycle (BYK Gardner), ASTM D4060 200 mic. dry film – loos 2 grams weight to 500 cycles (the standard allows 2.5 grams loss)
Resistance to heat 70^OC: with no changes in properties or deformation.
Number of recommended layers: 2-3
UV durability: 12 months exposure to direct sun.
Elongation before erosion: until 250%
Temperature durability: +60^OC to – 60^OC
Durability in water pressure: 4 atm.

Contains:

Chlorinated rubber resins.
Special flexibility substances.
Pigments UV ray endurance
Fillers, abrasion quartz.
Wetting materials.
Solvents and additives.

Tutgum Dengal swimming pool paint

For coating and sealing swimming pools.

Colors:

Standard blue, ocean blue, red and black for marking and signs texts.

Gloss:

Matte-silk.

Touch-dry time:

10-20 (avoid over spraying, the paint will not adhere to the surface)
If dust is formed while spraying add a retarder and thinner and low the spraying pressure. If too hot – work in the late morning or afternoon. .

Drying time period between layer applications:

5-4 hours. Final: 6 hours.

Application methods:

Brush, spray, roller.

Dilution:

Brush/roller: 5% – 10% D-32 thinner.
Spraying: 10% – 30% D-32 thinner 3-4 atm.
Airless: 5%-10% thinner D-32 5-6 nozzle 0.015”
In winter when cold a thinner D-18 can be used as it dries faster

Tutgum Dengal swimming pool paint

For coating and sealing swimming pools.

Surface preparations:

Thoroughly cleaning needed from dirt, grease, dust and old paint peeling.
Recommended by sand blast cleaning (level SA-2.5) or by mechanical polish and sanding until perfect clean surface achieved.
After cleaning a perfect dust vacuum needed.
For concrete and fiberglass swimming pools – 2 layers of Epoxyden floor primer in spray or roller with minimum dry time between coats for good adhesion. (test drying with finger print)
In case schpachtel fixing needed, use Epoxyden schpachtel after the first primer layer and in 24 hours paint the second layer of primer.
On Aluminum swimming pool: the same but the primer is Epoxyden wash primer. For better adhesion – before the primer coats: Remove grease with Degreazer M, etch with Antrox 14, and coat with yellow passivation with Passivator 1722.
In less than 24 hours spread the first coat of Tutgum Dengal on the second dry primer coat. After aprox. 3 hr. spread the second layer.
Waiting to long between the layers is not recommended as the primer coats can become to dry and hard and reject the top coat on it.

Packaging:

2.5 liter, 5 liters, 18 liters.

Storage:

In a shaded and cool place at room temperature with proper ventilation.
Keep lids sealed.

Shelf life span:

12 months in its original package.

Tutgum Dengal swimming pool paint

For coating and sealing swimming pools.

Equipment cleansing:

Use D-21 or mineral turpentine.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Tutgum Dengal swimming pool paint