SEALER ACRYLIC SOLVENT BASE
Transparent, shiny, wet-look solvent acrylic stone sealer
Transparent for a shiny wet look in the natural deep colors of the stone
Transparent glossy sealer for natural stone, marble and concrete, bomanite, terrazzo, granite.
SEALER ACRYLIC SOLVENT BASE Penetration acrylic solvent base sealer, water repellents for impregnating walls and floors for deep humidity isolation .
Characteristics:
- Ability to penetrate deep into the infrastructure.
- Repels water, oil, dirt and prevents their penetration into the infrastructure.
- Seals and prevents the penetration of rain into walls and floors of all kinds.
- Transparent does not change the natural shade. Not sticky after drying.
- Prevents further crumbling of an old wall or crumbling of cement in granarlite and bomanite floors.
- Allows painting of walls with Dunbartex and Dunbargloss.
- Strong resistance to alkaline substances.
- Abrasion resistance in granulite, bomanite, raised floors, etc.
- UV resistance
uses:
- Excellent transparent sealing for all types of floors, prevents the penetration of water, oil, dirt.
- Excellent transparent sealing for building walls on plaster, concrete, hard cladding or natural stone exposed to rain.
- Preservation of historical/ancient buildings.
- Conservation of stone statues and monuments.
- Tile roof covering.
- Sealing voids in pavers and open balconies.
- Granorlite driveway sealing.
- and sealing marble, granite and ceramic cladding in walls and floors.
Transparent for a shiny wet look in the natural deep colors of the stone
Technical data:
- Theoretical coverage area – 1 liter per 8 square meters. But it is emphasized that it must be sprayed or applied wet on wet until the infrastructure cannot absorb any more.
- Consumption for limestone – 1 liter per 2-3 square meters.
- Consumption for plaster – 1 liter per 4-5 square meters
- And consumption of concrete – 1 liter per 5-7 square meters
- And you need a gentle spray – 1 liter per 4-6 square meters
- Consumption for Jerusalem stone – 1 liter per 5-7 square meters.
- Consumption for silicate stone – 1 liter per 3-4 square meters.
- And consumption for a plaster wall – 1 liter per 4-5 square meters
- And consumption for tiles/terracotta – 1 liter per 6-7 square meters.
- Consumption per square meter – 1 liter per 3-4 square meters
- Flexibility – 1 mm (Sheen)
- Density – 0.95 gm/cm 3
For application on a dry floor only, do not wet with water. Must polish and vacuum only. Moisture spoils the sealer and white spots appear.
variety:
- Clear.
Lightning:
- high silk
Touch drying:
- 20-40 minutes .
Drying between layers:
- 4 hours. Final : 8 hours for treading : 12-24 hair depending on the thickness and ambient temperature.
Beginning of water repellency:
- 12 hours. Final repellency after 3 days.
- When spraying, spray until completely wet. (Do not leave puddles and the excess must be spread).
- Apply with one of the application methods until full and saturated impregnation. Remove the excess immediately while still fresh.
- It is recommended to repeat the coating at least twice to ensure complete sealing. Everything in a thin layer without leaving puddles.
packing:
- 5 liters, 18 liters
storage:
- In a cool and shady place at room temperature. and
- Make sure lids are tightly closed. and
This technical specification is for non-binding general information only. and
Produced by Denber Paints and Coatings Israel Ltd. , and
- Visit our sites: http://www.denber.net
- www.denber-paints.co.il
- www.denber-colors.co.il
- Varnish for wood. How to choose the right varnish for wood
- Thermal isolation Thermoseal 200 energy saving in green construction
- Crystal epoxy resin for tables
- Fire resistance of houses, hardwood and parquet floors, decks
- Sealing the floor of the balcony, terrace from rain
- Thin floor nano-coverings for industrial refrigerators and freezers
- Epoxy floors – Benefits of epoxy floors
- Swelling paints for steel protection against fire – Fire retardant paint
- As part of the restoration of buildings – concrete restoration at the Yad Kennedy site
- Paint for aircraft Denbergloss Jets
- Complicated sealing based on innovative technologies
- Reconstruction project of a unique house (Israeli house of architect Gaudi); Renovation of condominiums
- The work on the floor covering and restoration of the sports hall has been completed
- Denber has developed an innovative solution for thermal insulation works
- Mold, how to remove mold correctly and how to fight mold
- “Sick” buildings – Antibacterial paints destroys viruses / bacteria – Bacterinoll/ Tutgum Bacterinol
- Denber – floor coating using epoxy and polyurethane – find out what is suitable for you epoxy floor or polyurethane floor
- Epoxy floor coating and epoxy paints