Polyflex Schpachtel Big Cracks 2K filler

Polyflex Schpachtel Big Cracks 2K filler

Thick paste waterproofing mastic

Elastic membrane to fill big cracks and gaps between concrete vertical walls.

Viscous Hydrophobic Elastoplast Polyurethane specially formalized to provide high strength and flexibility.  Highly resistant to UV and polymerized in a two component mastic.  

Polyflex Schpachtel Big Cracks 2K filler. www.denber-paints.co.il

Polyflex Schpachtel Big Cracks 2K filler. www.denber-paints.co.il

Polyflex Schpachtel Big Cracks 2K filler

Thick paste waterproofing mastic

Properties:

  • Heavy duty-thick One layer applicable at any thickness desired. 100% solids – no solvent evaporation.
  • Has alkali and acid resistance.
  • Durable against industrial polluted water for long periods of time.
  • Durable against fuels, oils, lubricates and jet fuels.
  • And Durable against cleansing and other pungent materials.
  • Durable against scratches, hits and heavy loads.
  • Amazingly flexible and resilient, return back to its original shape without any deformation.
  • Has an excellent adhering ability to concrete and aluminum surfaces and all types of industrial infrastructures.
  • High mechanical strength and excellent erosion durability.
  • Durable in dry heats of up to 120°C on short periods of time and up to 80°C for long periods of time.
  • Does not contain any thinners so it is applicable in low ventilation
  • Quiets noises and creates an acoustic.
  • Appropriate for chemical industrial equipment to fill, seal and to resist noises.
  • Appropriate for repairing tanks and pools avoiding future leaks caused by expansion and shrinking.

 USES:

  • Walls big cracks filler.
  • Gaps filling between concrete walls.
  • Waterproofing joints in swimming pools and drinking water wells and sewage tanks .

Polyflex Schpachtel Big Cracks 2K filler

Thick paste waterproofing mastic

Technical  specifications:

  • Amount needed: 100% solids, casting volume is equal to the substance volume.
  • Density: Base (part A) gray colored: 1.3 gm/cm3 (DIN 51575) -l .3RAL7032
  • Hardener (part B) clear colored: ,1.22.   A+B mixture: 23.3+6.7=30 Kg
  • Amount of solids – 100%
  • Ratio Bases:Hardener volume mixture ratio: 3:1
  • Flash point: Base at 255°C, hardener at 166°C (isn’t flammable , doesn’t contain solvents) (DIN 53213 53213 )
  • Hardness: 10 Dg (Erichsen) (over 60 – DIN 53153)
  • Flexibility: film 120 microns – 1 mm (Sheen).
  • Viscosity: Base (part A) 15,000 CPS (Brookfield) at 25°C Hardener (part B) 85-100
  • Stretch dexterity: 600 kg per cm.
  • Erosion endurance: 4500 cycle (grinder) ATSM, roll CS,-17  1kg load, 1000 cycles, Lose of 40 milligrams, according to ASTM 4060
  • Adhesion to concrete: stronger than the concrete.
  • Adhesion to Epoxyden Floor Primer 245 kg per square cm.
  • Flexibility in drag 10% N/mm2 (DIN 53457)
  • Drag resistance: 8 N/mm2 (DIN 53455).
  • Level of electric isolation: 15xl013ohm per cubic cm.
  • Pot life time limit after mixing sections A+B: 60 minutes at 20°C.
  • Minimal ripe-time before usage: at least 24 hours
  • Final hardness: 3-7 days.

Polyflex Schpachtel Big Cracks 2K filler

Thick paste waterproofing mastic

Contains:

  • Special polyurethane resin.
  • Chemical endurance additives.
  • Hardeners.
  • Additives.
  • Fillers.
  • Pigments.

Colors:

  • Gray.

Dry time:

  • 6 hours to 3 days depending on temperature.

Ventilation:

  • Does not contain any solvents so that a medium amount of air is required.

Methods of Application:

  • Casting, spreading and smooth with a spatula.

Dilution:

  • Use without diluting.

Polyflex Schpachtel Big Cracks 2K filler

Thick paste waterproofing mastic

Surface Preparation:

  • A basic cleaning of dust , oils, dirt.
  • To improve adhesion: Concrete– Apply on absolutely clean It is required to apply Epoxyden Primer first (see product specifications), if the concrete absorbs the primer leaving the surface with opened pores it is required to apply another layer of Epoxyden Primer. Aluminum – Apply primer Epoxyden Strontium Chromate (see product specifications). Steel-Apply a thin 50 micron layer of Epoxyden 19.

Package:

  • 5 liters, 18 liters.

Shelf Life and Storage:

  • 12 month in original sealed container

Cleaning materials:

  • XL Thinner

Material Safety Precautions:

  • Do not ingest, keep away from the reach of children .
  • Use adequate ventilation during use.
  • flammable must be kept away from sources of fire .
  • when scanning Rinse with water and soap and is currently having wash of unleaded petrol and high octane .
  • wear goggles , gloves and protective clothing.
  • In case of injury – go immediately for medical facility.

Polyflex Schpachtel Big Cracks 2K filler

Thick paste waterproofing mastic

Warning:

  • Do not mix materials are not mentioned by us .
  • in the vertical walls or slanted surfaces exposed to the sun can be runny thick layer .

Quality Inspection:

  • Testing in our laboratories in accordance with the guidelines of ISO 9001-2015

Warnings:

  • When exposed to the sun the coating changes color.
  • Clean with mild cleaning materials.
  • Don’t scratch or drag heavy and sharp objects that could damage the coating.

Note:  User  attention:

This technical specifications are only for general information without obligations. The product is a professional product demanding prior experience. This specification is not written as a substitute for advice/guidance by consultant/official guide. You should test a small space area before full  implementation. This specification content varies from time to time and changes made, see to request updates and the latest versions. Professional guides folder names consultants can be obtained by telephone. You must read the MSDS safety instructions before you start working with the product.

Polyflex Schpachtel Big Cracks 2K filler

Thick paste waterproofing mastic