PolyFlex Gag roof sealing one component membrane

PolyFlex Gag roof sealing one component membrane

Liquid waterproofing humidity cure, elastic membrane

PolyFlex Gag roof sealing one component membrane. www.denber-paints.co.il

Viscous liquid of Hydrophobic Elastomeric Polyurethane specially formulized to provide high strength and flexibility. Highly resistant to UV and polymerized in a single component without the need of a hardening agent. Primarily used a waterproofing and sealing material for roofs, concrete, sub grade, underground pipes, bathrooms, kitchens, agricultural facilities. It is an advanced and more efficient alternative for bitumen sheets.

Liquid waterproofing humidity cure, elastic membrane

Features:

Excellent insulator for underground walls ( vertical and horizontal)preventing water penetration.
Suitable for sub floor waterproofing for ceramic tiles in balconies and wet rooms.
High UV resistance, resistance to weather, resistance to chemicals. Ideal for waterproofing agricultural or chemical installations.
Temperature and cold resistance from -50 ° C up to 100 ° C and up to 250 ° C for a short time
High adhesion to concrete, sheet metal and other substrates without the need of a priming coat.
Highly flexible. Has a tremendous ability to stretch, prevents water leakage in large cracks .
Can be sprayed or painted in layers of a thickness up to 75 mm without the need for reinforcing sheets or fabrics plates or between the layers .
Can be diluted with thinner XL (Polyurethane grade thinner) when needed.
After curing, it is considered non – toxic material suitable for interaction with drinking water.
Can be applied on damp surfaces or concrete prior to its fully cured cycle of 30 days.
Very solid and resistant to scratches, can handle foot traffic and outdoor furniture for several years.
Can be sprayed possible without the need of a diluting substance.
Single component and therefore easy to work and has a high adhesion capacity for all floors and substrates .
High flexibility and tear resistance, can handle earthquakes and tremors and is suitable for high rises and elevations.
White non heat absorbing and very easy to clean.

PolyFlex Gag roof sealing one component membrane

Liquid waterproofing humidity cure, elastic membrane

USES:

Waterproofing and damp proofing of sub grades and walls prior to dirt fill (it is recommended to be covered with shingles or plastic sheeting)
Waterproofing of slanted surfaces and roofs without the need for bleaching because PolyFlex is itself white color.
Sub floor sealing and waterproofing under ceramic tiles or concrete slabs to prevent water leakage to neighboring rooms .
Waterproofing balconies and terraces. Waterproofing swimming pools and drinking water wells and sewage tanks .
Coating Flats and basins to prevent water leakage and to close the cracks .
Waterproofing and sealing roofs and surfaces as a better alternative to bitumen. Can be used to repair damaged panels.
Can be poured in joints and cracks as a filler to link different elements of concrete and construction of bridges and the like.
To improve the permanent insulation .
Fill material in the piping crossings across the walls and pipes under ground
Does not flake or dust and does not emit any gases. It therefore fits contact with dry materials in food stores and refrigerators .

Liquid waterproofing humidity cure, elastic membrane

Technical Data :

Fat Coverage – at least 1 kg per square meter WFT / 75 liters per square meter.
The number of coats recommended – at least 2 coats, for high mechanical resistance apply a DFT of 4-6 mm.
Cover underground coated walls and sub grades with polystyrene foam sheets at 5cm thickness prior to dirt filling.
Final drying – about 24 hours after application.
Viscosity – 5000 – 7000 CPS
The flash point of 300 c
Solid content – 95% c
Density: 1.3-1.4 g/cm3
Elongation: 400%
Tear resistance: 60kg/cm2 at 100mm/min (ASTM D-412)
Hardness: ASTM D 2240 DIN 53505 or 70SHORE A ISO R 868
Temperature range -50 ° C up to 90 ° C
Water pressure resistance: withstands 1 bar for 24 hours (ASTM D-751)
Abrasion – 120 micron – 940 cycles ( Gardener ) ASTM .

PolyFlex Gag roof sealing one component membrane

Liquid waterproofing humidity cure, elastic membrane

Contains:

Polyurethane rated special polymer
Other polymers
fillers and flex agents
inorganic substances
UV resistant pigments .

Colors:

mainly white , possible also red , gray , silver and black and green

Dry time:

6 hours to 3 days depending on temperature

Methods of Application:

Brush, roller or spray
must prepare each layer thickness of 1-2 mm to prevent Arashj in vertical walls , and after 48 hours if the first layer dry as possible the work of a second layer thickness is similar.

Dilution:

Use without diluting. In the event of drying in container due to poor sealing of an open container, you can dilute in a polyurethane graded thinner with a maximum of 10% by volume.

Surface Preparation:

A basic cleaning of dust , oils, dirt.

Package:

Shelf Life and Storage:

12 month in original sealed container

Cleaning materials:

XL Thinner

PolyFlex Gag roof sealing one component membrane

Liquid waterproofing humidity cure, elastic membrane

Material Safety Precautions:

Do not ingest, keep away from the reach of children .
Use adequate ventilation during use.
flammable must be kept away from sources of fire .
when scanning Rinse with water and soap and is currently having wash of unleaded petrol and high octane .
wear goggles , gloves and protective clothing.
In case of injury – go immediately for medical facility.

Warning:

Do not mix materials are not mentioned .
in the vertical walls or slanted surfaces exposed to the sun can be runny thick layer .

Quality Inspection:

Testing in our laboratories in accordance with the guidelines of ISO 9001-2008

Warnings:

When exposed to the sun the coating changes color.
Clean with mild cleaning materials.
Don’t scratch or drag heavy and sharp objects that could damage the coating.

Note: User attention:

This technical specifications are only for general information without obligations. The product is a professional product demanding prior experience. This specification is not written as a substitute for advice/guidance by consultant/official guide. You should test a small space area before full implementation. This specification content varies from time to time and changes made, see to request updates and the latest versions. Professional guides folder names consultants can be obtained by telephone. You must read the MSDS safety instructions before you start working with the product.

PolyFlex Gag roof sealing one component membrane