Al mayim 2001 sealer silicon acryl for walls. Denber paints

Al mayim 2001 sealer

Sealer silicon acryl for walls.

Al mayim 2001 sealer www.denber-paints.co.il

From transparent silicone acrylic absorption to outdoor walls. Transparent liquid in silicons and acrylic water-thinned. Of a tiny molecular size that allows penetration and absorbs to the depth of the wall without changing the natural appearance of the treated area. Penetrates deep into the infrastructure and strengthens and seals it. Creates a transparent, incorporating and breathable sealing layer that allows for continued painting if necessary. Protects walls of plaster, acrylic thick wall coat, colored schlicht, natural and artificial stone, concrete, marble, mosaic, granulite, terracotta and all types of coatings for walls except against the penetration of water and dirt. Infarfares and strengthens and improves wear and wear resistance. Cement infrastructure should only be applied after 30 days of ashfare.

Al mayim 2001 sealer

Sealer silicon acryl for walls.

Features:

Intrusion into the depth of the infrastructure .
Repels water, oil, dirt and prevents them from entering the infrastructure.
Sealing and breathing. Prevents rain from entering the outside walls.
Transparent does not change the natural hue.
Not sticky after drying.
Strengthens and prevents the continued disintegration of an old wall.
After full drying, allows for continued painting of exterior walls in Denbercryl and Denbertex.
Robust resistance to alkali materials.
Resistance to the erosion of winds and rains.
UV durability

uses:

Excellent transparent sealing for other types of outdoor walls, prevents the penetration of water, oil, dirt.
Excellent transparent sealing for the walls of buildings on plaster, schlicht, colorful schlicht, concrete, natural stone that are exposed to rain.
Preservation of historical/ancient buildings.
Preservation of stone statues and monuments.
Coating tiled roofs, maintaining the beauty of the shingle, preventing dirt adhesions and mold and green development, facilitates washing.
Sealing ovary in ceramic and stone spaces in outer walls.
Sealing marble, granite and ceramic cladding in outer walls.

Al mayim 2001 sealer

Sealer silicon acryl for walls.

Technical data:

Theoretical coverage area – 1 liters per 8 square meters. But it is emphasized that wet should be sprayed or applied wet on wet until the infrastructure can no longer absorb.
Consumption of limestone – 1 liter per 2-3 square meters.
Consumption of plaster – 1 liter per 4-5 sqm
And consumption for concrete – 1 liter per 5-7 sqm
wall textured delicately – 1 liters per 4-6 sqm
consumption for Jerusalem stone – 1 liter to 5-7 sqm.
Consumption of silicate stone – 1 liters per 3-4 sqm.
And Consumption for gypsum wall – 1 liters per 4-5 sqm
For shingles / terracotta – 1 liters to 6-7 sqm.
Consumption sand stone – 1 liters to 3-4 sm.
flexibility – 1 mm (Sheen)
Density – 0.95 gm\cm3
viscosity – 30-40 cPs (Brookfield)
rigidity – 2Dg (Erichsen)

Contains:

Silicone.
Acrylates.
Emulsifiers.
water.
Additives.

Shade:

Transparent.

Al mayim 2001 sealer

Sealer silicon acryl for walls.

Gloss:

High silk

drying to the touch:

2 to 4 hours.

Drying between layers:

6 hours. Final: 12 hours. To tread: 24-72 hours depending on the thickness and temperature of the environment.

Starting effectiveness for water rejection:

12 hours. Final rejection capacity after 3 days.

Application methods:

spraying, rolling, brushing. In a even thin layer.
When you are brushing or rolling, repeat several times until fully wet.
Spray until fully wet.

Dilution:

No dilution, low-pressure.
Water can be added to the first layer for deeper penetration.

Al mayim 2001 sealer

Sealer silicon acryl for walls.

Preparation of area and application:

cleaning outdoor walls under water pressure, natural wall at least 150 atm. at list.
Waiting to dry and repair cracks and fractures and baldness in the walls if needed.
Open spaces in ceramics – fill the spaces with a cement rifle or preferably to an epoxy district.
Natural stone – remove loose and new sniff.
Cracks – fill with polyurethan polyflex mastica gum.
After two days, the Al mayim 2001 can be applied to dry and clean terrain.
Shake container well before use.
Apply in one of the application methods until fully absorbed and saturated.
It is recommended to repeat the coating at least twice to ensure full sealing. All in a thin layer without leaving puddles in horizontal areas (on a prominent stone or tiled roofs, etc.).

Packaging:

5 liters, 18 liters.

Storage:

In a cool, shady place at room temperature.
Keep lids tightly closed.

Shelf life:

12 months in original packaging.

Al mayim 2001 sealer

Sealer silicon acryl for walls.

Cleaning Tools:

water immediately after the application is complete.

Safety:

Not edible, out of reach of children.
In case of injury, seek medical attention.

Caution:

Do not mix with materials not recommended by us.
It is recommended not to apply on a rainy day.
Do not apply to walls/coatings containing cement before 30 days of improving from the date of application.
It is mandatory that the customer’s responsibility to try and check for a match first on a small area before applying in large areas.
Avoid contact with the skin and eyes, causing dryness and irritation of the skin.
In contact, rinse with plenty of running water and seek medical attention.

Quality review:

In our factory laboratories in accordance with specifications.
ISO 9001-2015

User’s Attention: This technical specification is for general non-binding information only. The product is a professional product for professionals only who have already acquired previous experience in its implementation. This specification does not serve as a substitute for advice/training by an authorized consultant/guide. It is mandatory to apply to a small area for match testing first before applying large areas. The content of this specification changes over time and updates are entered, and updated versions must be requested. Names of consultants/professional instructors can be obtained by telephone. Read product MSDS safety instructions before starting work with it. Manufactured by Denver Colors & Coatings Israel Ltd., 80100 Sderot, 80100, certified by the Standards Institution of Israel in accordance with ISO 9001-2015 standards

Al mayim 2001 sealer