Sealer 8 wet appearance 

Sealer 8 wet appearance 

Sealer 8 is a glossy transparent protector for impregnation for natural wood and stone walls.

For stone and wood walls with a wet and shiny appearance, a sealer and protector penetrates.

Sealer 8 wet appearance www.denber-paints.co.il

Sealer 8 wet appearance www.denber-paints.co.il

Sealer 8 transparent glossy protector for impregnation for natural wood www.denber-paints.co.il

Sealer 8 transparent glossy protector for impregnation for natural wood www.denber-paints.co.il

Sealer 8 for natural stone seals and beautifies www.denber-paints.co.il

impregnation Sealer 8 for natural stone seals and beautifies www.denber-paints.co.il

A transparent liquid covers and seals a diluted solvent with a tiny molecular size that allows penetration and absorption to the depth of the wooden floor or the absorbent stone wall, giving a wet look to the infrastructure of the treated area. Penetrates deep into the infrastructure and strengthens and seals it. Creates a transparent sealer layer that prevents the passage of water or other liquids . Protects wooden floors and walls, as well as natural stone, concrete, terracotta walls, against water and dirt penetration. Seals and strengthens. The sealer for impregnation in walls only, not for coating .

SEALER 8 CLEAR GLOSSY – WET APPEARANCE Penetration solvent base sealer, water repellents for  impregnating wooden walls and floors for deep humidity isolation

Characteristics:

  • Ability to penetrate deep into the infrastructure.
  • Repels water, dirt and prevents their penetration into the infrastructure.
  • Seals and prevents the penetration of rain into walls and wooden floors of all types.
  • Transparent with a wet look, emphasizes the natural shade. Not sticky after drying.
  • Seals walls and floors of new and old wood and strengthens it, prevents water penetration to prevent decay and disintegration.
  • Strong resistance to household cleaning agents.
  • Absorbent natural stone for walls – seals and serves and beautifies.

uses:

For application on dry infrastructure only, do not wet with water. Must polish and vacuum only. Moisture spoils and white spots appear.

  • Excellent transparent sealing for wooden walls of all types, prevents water and dirt penetration.
  • Wood cladding tile roofs.
  • Sealing absorbent natural stone walls.

For stone and wood walls with a wet and shiny appearance, a sealer and protector penetrates 

Technical data:

  • Theoretical coverage area – 1 liter per 8 square meters. But it is emphasized that you must spray or apply wet on wet until the infrastructure cannot absorb any more. Scoop the excess with a mop up to “zero” height, do not leave a layer on top at all.
  • Flexibility – 1 mm (Sheen)
  • Density – 0.95 gm/cm 3
  • Viscosity – 30-40 cPs (Brookfield)
  • Stiffness – 5Dg (Erichsen

containing:

  • Solvents.
  • Resins.
  • additives.

variety:

  • yellowish transparent.

Lightning:

  • High gloss/silk.

Touch drying:

  • 4 hours .

Drying between layers:

  • 4 hours. Final : 24 hours  for treading : 24 hours and depending on the ambient temperature.

Beginning of water repellency:

  • 24 hours. Final repellency after 3 days.

Application methods:

  • Spraying, rolling, brushing. in a uniform thin layer without puddles.
  • When brushing or rolling, the operation must be repeated a number of times until complete wetting.
  • When spraying, spray until completely wet. (Do not leave puddles and apply, wipe and spread the excess)

For stone and wood walls with a wet and shiny appearance, a sealer and protector penetrates 

Dilution:

  • No dilution at low pressure.

Area preparation and application:

  • Cleaning wooden walls by polishing and vacuuming.
  • Waiting for complete drying and repairing the walls if necessary.
  • Apply with one of the application methods until full and saturated impregnation. Remove the excess immediately while still fresh.
  • It is recommended to repeat the coating at least twice to ensure complete sealing. Everything in a thin layer without leaving puddles.

This technical specification is for  non-binding general information only. 

For the full specification:  Sealer 8 transparent, shiny protector for impregnation

Manufactured by Denver Paints and Coatings Israel Ltd., PO Box 690 Sderot, 80100, certified by the Israeli Standards Institute in accordance with the  ISO 9001-2015 standard.

See sealer for concrete that prevents the penetration of dirt, prevents erosion, prevents dust, is resistant to outdoor use in direct sunlight Danberglus sealer

and see the article Sealer for stone, concrete, marble, wood for floors, walls, walkways, counters, a description of types of sealers and their use.

And see  epoxy sealer for floors and counters wear-resistant epoxy sealer without exposure to the sun. 

For stone and wood walls with a wet and shiny appearance, a sealer and protector penetrates