Retarder delay drying time prevent over spray
Over spray preventing
Additive retarder of control drying time for Denbergloss Direct Gloss, Acryl car and Denberdiuke paints allowing painting large areas without OVER SPRAY causes of too fast drying time and the paints vapor falls like dry sand on the surface.

Retarder delay drying time prevent over spray. www.denber-paints.co.il
Retarder delay drying time prevent over spray
Over spray preventing
Properties
- Delay drying time of paints prevent over spray.
- Improves final film look.
- Increase final gloss of the paint.
- Allow to paint very large surfaces without dry vapor of paint in the air.
Applications
- For painting cars & vehicles.
- For painting agriculture machinery.
- and For painting engineering equipment.
- For painting big elements like trucks and their back box etc.
Technical data:
- Viscosity – 13 sec #4
- Density – 0.9-1.0 gm/cm3
Contains:
- Retarder
Color :
- Clear
Retarder delay drying time prevent over spray
Over spray preventing
Application methods:
- To add to the mixture of paint with the hardener and thinner about 10% before start painting.
Packaging:
- 1 liter, 5 liters, 18 liters.
Storage:
- In a shaded and cool place at room temperature with proper ventilation.
- Keep lid tightly closed.
Shelf life:
- 24 months in its original
Quality control:
- In factory laboratories according to specifications.
- COA and COC certificate.
- ISO 9001-2015
Retarder delay drying time prevent over spray
Over spray preventing
Safety precautions:
- Inedible, keep away from the reach of children.
- Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
- While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
- Wear protective glasses, gloves and suits.
- Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
- In case of an injury immediately get doctors assistance.
- Read the safety instructions on the labels.
- See M.S.D.S
Retarder delay drying time prevent over spray
Over spray preventing
Warnings:
- Don’t mix the product with materials which were not recommended by us.
- Don’t apply if the temperature is under +7°C.
- Don’t apply if humidity is over 80%
- When applying with Airless, do not aim it at anybody a direct hit could be fatal at pressures over 150 atm.
- Read thoroughly the technical data of the product listed in this section; confirm that everything is understood completely, for clarification contacts our tech. department.
- All information that is listed in this content is a recommendation merely and cannot be applied in the court of law.
- The costumer must test & check that this product is compatible with his equipment and needs.
- The information listed in this section is according to the laboratory conditions (temperature, humidity etc.) which the products were tested.
- The recommendations listed do not hold any responsibility for this product.
- Theoretical and actual coverage area are different concepts, the actual coverage is affected by the required thickness of the layers, required number of layers, painting conditions including the amount of paint which spread in the air before touching the surface.
- The information listed in this section is based on experience and accumulating data, Denber inc., has the right to change the information listed at any time.
- Paints that have been in stagnation or exposed to air more than needed could have their qualities changed.
Retarder delay drying time prevent over spray
Over spray preventing
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- Fire resistance of houses, hardwood and parquet floors, decks also
- Swelling paints for steel protection against fire – Fire retardant paint also
- Epoxy floor coating in casting and painting also
- Crystal epoxy resin for tables also
- To the article Sealing also
- The complete article on the sealing materials for roofs and walls also
- Sealing the floor of the balcony, terrace from rain also
- Mold, how to remove mold correctly and how to fight mold also
- “Sick” buildings – Antibacterial paints Bacterinoll/ Tutgum Bacterinol also
- Paint for aircraft Denbergloss Jets also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Denbergloss Clear also
- Varnish for wood. How to choose the right varnish for wood also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- For a free consultation, call Denber – Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794