Denbergloss Metallic Direct Gloss

Denbergloss Metallic Direct Gloss

Car paints metallic shades

Denbergloss Acryl (Direct gloss) Acrylic polyurethane UV resist paint for cars

 Polyurethane aliphatic car metallic paints. High gloss two component very durable paint. UV resist, scratch resist, for hard demands, for coating cars and vehicles.

Denbergloss Metallic Direct Gloss. www.denber-paints.co.il

Denbergloss Metallic Direct Gloss. www.denber-paints.co.il

Denbergloss Metallic Direct Gloss

Car paints metallic shades

Properties:

  • Smooth finish and tough.
  • Flexible yet also hard.
  • Washable and repels dirt.
  • High erosion endurance.
  • Endures scratches.
  • High adhesion properties.
  • Endures chemicals (cleaning materials)
  • Durable in solvents.
  • UV resistant, resistant to exterior harsh environment conditions and freezing.
  • Fast drying Multi-thickness.
  • Very strong shine that lasts for many years.
  • Resistance to heat and cold.
  • Endures mechanical hits.
  • Quick drying.
  • Does not contain cadmium, lead, and chromates.
  • Produced in any shade.

Applications:

  • As  middle or top layer for cars.
  • Painting all sorts of vehicles.

Denbergloss Metallic Direct Gloss

Car paints metallic shades

Technical specifications:

  • Part 1 –can be easily blended manually for smooth and uniform solution is 5 minutes.
  • Part II – to be transparent and clear.
  • Storage durability – 24 hours in 570 C without sagging.
  • Theoretical coverage area: 10-15 sqm per liter.
  • Hiding power – >0.95 yellow >0.9 58 mics. Dry film.
  • Recommended layer thickness: 40-50 microns (dry)
  • Recommended wet thickness for every layer: 80-100 mic (wet)
  • Recommended number of layers: 2
  • Flexibility: 1 mm (SHEEN)
  • Density: 1-1.3 gm/cm3
  • Viscosity: 17-23 sec. #2
  • Hardness – >10 Dg < (Erichsen)
  • Abrasion – 120 microns – 4200 cycles (Gardner)
  • Base-Hardener ratio: 2:1 = 50%
  • Milling – <7 (Hegman)
  • Gloss – 60o >95%
  • Shades change – < delta E=1

Car paints metallic shades

  • Pot life – work time period after A+ B mixture: 6 hours
  • Distilled water resistant 24 hours – without losing adhesion or corrosion inspected 1 hour after pooling out of the liquid.
  • Carbons resistance – without losing adhesion inspected 1 hour after pooling out of the liquid.
  • Resistance to oil 1250 24 hours at 121OC- without losing adhesion inspected 4 hours after pooling out of the liquid.
  • Resistance to hydraulic oil 24 hour in 66OC – without losing adhesion inspected 4 hours after pooling out of the liquid.
  • Jet fuel resistance – 7 days in room temperature- without losing adhesion inspected 4 hours after pooling out of the liquid.
  • Heat resistance durability – 121OC for 60 minutes. No color shade changes up to Delta E = <1
  • Humidity cell durability – 30-day 100% humidity temperature 49OC – without losing adhesion or damage to the film 1 hour after the release of the liquid.
  • Salt spray chamber 2,000 hr.– with no rust.
  • Thermal shock – without losing adhesion.
  • Percentage of solids – 66.6%
  • UV resistance – 1,200 hr. Q-Panel with UVA-340 lamp cycles of 8 hr. light in temp. 60OC and 4 hr. 50OC, ASTM D-4587-91

Denbergloss Metallic Direct Gloss

Car paints metallic shades

Contains:

  • High quality acrylic polyol
  • Fillers, pigments
  • Solvents, additives
  • Part b – aliphatic isocyanides UV durable, special mixture.

Shade:

  • Any

Gloss:

  • Shiny

Touch-dry time:

  • 30-60 minutes

Drying time period between layer applications:

  • 30 minutes wet on wet or 8 Final: 12-16 hours.

Denbergloss Metallic Direct Gloss

Car paints metallic shades

Application methods:

  • Spray.

Dilution:

  • Spraying: 10%-35% D-11 thinner.

Equipment cleansing:

  • Use D-11 thinner immediately after use.

Surface preparations:

  • Thoroughly clean the surface.
  • Remove any grease or dirt.
  • Sand and clean surface.

Primer paint:

  • Compact schpachtel.

Packaging:

  • 3.35+1.65=5 liter
  • 5 liters + 2.5 liters of hardener = 7.5 liters.

Denbergloss Metallic Direct Gloss

Car paints metallic shades

Storage:

  • In a shaded and cool place at room temperature with appropriate ventilation.
  • Keep lids hermetically sealed.

Shelf life span:

  • The paint: 24 months in its original package.
  • Hardener: 12 months in its original package.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Denbergloss Metallic Direct Gloss

Car paints metallic shades