Denberdiuke Clear White/Colours

Denberdiuke Clear White/Colours

Nitro fast drying paint for cars.

PAINT/LACQUER  BASED ON NITROCELLULOSE FOR PAINTING CARS & FURNITURES

Denberdiuke Clear White/Colours, cars and wood. www.denber-paints.co.il

Denberdiuke Clear White/Colours, cars and wood. www.denber-paints.co.il

Hard & flexible (scratch resistance) high quality paint/lacquer dries quickly, Useful for painting cars & metal, wood & furniture’s

Denberdiuke Clear White/Colours

Nitro fast drying paint for cars.

Properties:

  • Hard & flexible.
  • Water sealant.
  • Scratches resistance.
  • Excellent adhering ability to the surface.
  • Enables to paint a few layers to achieve a thick layer.
  • Dries quickly: A few hours up to 1 day according to the temp.
  • Easy application.
  • High coverage area.
  • Economic paint.

Applications:

  • Layer in car painting system (colored smooth or metallic)
  • Lacquer for painting wood & metal.
  • Hard lacquer for indoor furniture.
  • Waterproofing outdoor furniture, sealing against water/moisture penetration.
  • Paint for painting cars & metals

Technical Data:

  • Theoretical coverage area: 8-10 sqm.. per 1 liter
  • Flexibility: 2 mm(Sheen)
  • Viscosity: 1-5pa.(Haake)
  • Density :    9-1.3 gm/cm3
  • Hardness : > 3 Dg (Erichsen)
  • Abrasion test: 120 mic. film 3600 cycles (BYK Gardener) ASTM
  • Recommended two layers:100-200 microns wet of thickness per each

Denberdiuke Clear White/Colours

Nitro fast drying paint for cars.

Contains:

  • Nitrocellulose
  • Alkyds
  • Pigments
  • Solvents
  • Additives

Shade:

  • Clear
  • Any car color (according to any catalogue).
  • Various metallic shades.

Gloss:

  • Glossy (can be ordered mate or silky )

Touch dry time:

  • 10-30 minutes.

To avoid “dust” due to “over spray” add retarder and lower the pressure,

Drying time:

  • Between layers: 60-90 minutes
  • Final: 3-6 hours

Denberdiuke Clear White/Colours

Nitro fast drying paint for cars.

APPLICATION METHODS

  • Brushing, spraying
  • For the first & the second layers it is recommended to spray with 4atm. Pressure.

Dilution:

  • With D-21 thinner merely.
  • For brushing/rolling – 10-20% dilution.
  • For spraying – 30% dilution.

Surface preparation:

  • Clean the surface thoroughly by rubbing out with glass paper to remove oils & dirt of all kind.
  • Seal pores with Denberduke primer universal.

Primer paint:

  • For metals, plastic and polyester surfaces Denberdiuk primer universal.
  • For wood lacquer: Use Denber primer sealer single component (sanding sealer) or Denber Isolation Polyurethane
  • and For colored wood: denber white sandable compact schpachtel
  • For cars: Denber primer acrylic filler or polyurethane “compact schpachtel for cars”.

Packaging:

  • 1,5,18 liters

Denberdiuke Clear White/Colours

Nitro fast drying paint for cars.

Storage:

  • In a shaded & cool place at room temp. with appropriate ventilation.
  • Keep lid hermetically sealed.

Shelf life:

  • 12 months in its original package.

Equipment cleaning:

  • Clean with D-21 thinner immediately after the painting application is over.

Quality control:

  • ISO 9001-2015
  • In our factory’s laboratories under these

Safety precautions:

  • Not eatable, keep away from the reach of children.
  • Flammable, keep away from heated areas, fires, flames, and Prohibit smoking in the working area.
  • If the working area is not airy enough, the use of ventilation is essential (according to the ventilation table.)
  • Wear protective glasses, gloves and
  • Avoid direct contact with the paint and thinner from the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the lables.

Denberdiuke Clear White/Colours

Nitro fast drying paint for cars.