Denberdiuke 7 electric isolation nitro base
Electric isolation nitro paint/lacquer
Hard & flexible (scratch resistance) high quality nitrocellulose paint/lacquer clear/tinted dries quickly, for electric isolation. Internal and external especially suitable as protective coating for electrical insulation of electrical and electronic systems exposed to water and humidity to prevent short circuits.

Denberdiuke 7 electric isolation. www.denber-paints.co.il
Denberdiuke 7 electric isolation nitro base
Electric isolation nitro paint/lacquer
Properties:
- Excellent electrical insulation up to 150,000 volts per millimeter for a dry layer 25 microns.
- Smooth and hard finish.
- Flexible and tough as one.
- Very washed and repulsive dust and dirt.
- High hardness, suitable for meeting external conditions.
- Excellent adhesion capacity for infrastructure.
- Resistant to scratches and mechanical injuries.
- Easy to implement.
- Chemical resistant.
- Heat and cold resistance.
- Quick drying.
- Contains no cadmium, lead, chromats.
Applications:
- For painting the top layer of metal doors and railings – steel and aluminum for electrical insulation.
- For painting metal electrical cabinets and central box/tin power nodes.
- For painting steel constructions, steel pillars and metal fences where there may be electrocution.
- For coating electrical contacts, cable shoes, etc.
- As an upper layer for electrical insulation of systems that may come into contact with water or high humidity and transmit electricity that can endanger human life and/or cause short circuits.
Denberdiuke 7 electric isolation nitro base
Electric isolation nitro paint/lacquer
Technical Data:
- Storage durability – 24 hours in 57oC without separations and spoilage,
- Theoretical coverage – 1 liter to 10-15 sqm.
- Hiding power – >0.95 in a layer of 58 microns dry layer
- thickness recommended 25-40 dry microns.
- Recommended wet layer thickness – 80-100 microns.
- Recommended number of layers -2
- flexibility – 1 mm (sheen)
- density – 1.0-1.3 gm\cm3 (lacquered 0.9 colors to 1.3)
- Average viscosity – 1-2 Pa.sec
- Rigidity – >10 Dg (Erichsen)
- Abrasion – 120 microns – 1800 cycles (Gardner) ASTM
- Grinding – glossy < 7 Hageman
- Gloss at 60oC – Glossy >80%
- Distilled water resistance 24 hours – none Loss of adhesion or corrosion an hour after extraction from the liquid.
- Carbon resistance – without loss of adhesion an hour after extraction from the liquid.
- Oil 1250 resistance 24 hours in 121oC- without loss of adhesion 4 hours after extraction from the liquid.
- 24-hour hydraulic oil resistance in 66oC – Without loss of adhesion 4 hours after extraction from the liquid.
- Jet fuel resistant liquid – 7 days at room temperature – without loss of adhesion 4 hours after extraction from the liquid.
- Heat-resistant – 121oC for 60 minutes. No hue changes to Delta E=1.
- Humidity chamber – 30 days in 100% humidity at 49oC temperature without loss of adhesion or damage to film an hour after extraction from the liquid.
- Thermal market – no Adhesion losses.
- % solids in volume – >52% , transparent >35%.
- Electrical insulation (dielectric strength) at temperature 18-22 degrees 30 kilovolts per mm – passes.
- Dielectric strength for dry layer voltage 25 microns – 150 KV/mm (ASTM-D-149)
Denberdiuke 7 electric isolation nitro base
Electric isolation nitro paint/lacquer
Contains:
- Nitrocellulose
- Resin
- Pigments
- Solvents
- Additives
Shade:
- Clear
- Red, yellow, black.
Gloss:
- Glossy.
Touch dry time:
- 10-30 minutes.
- To avoid “dust” due to “over spray” add retarder and lower the pressure,
Drying time:
- Between layers: 30 minutes
- Final : 3-6 hours
APPLICATION METHODS
- Brushing, spraying, roller, immersion.
Dilution:
- With D-21 thinner merely.
- For brushing/rolling – 10-20% dilution.
- For spraying – 30% dilution.
- Airless – 5-10 %
- Dipping – 60-80%
Denberdiuke 7 electric isolation nitro base
Electric isolation nitro paint/lacquer
Surface preparation:
- Clean the surface thoroughly by rubbing out with glass paper to remove oils & dirt of all kind.
- Seal pores with Denberduke primer universal.
- Iron – mechanical polishing to white metal and painting anticorrosive primer – synthetic Denberust or Tutgum Primer or Epoxyden Primer Rust Converter.
- Galvanizes – white totegum galvanize or pa&PU epoxyden.
- Aluminum – Epoxyden Wash Primer.
Packaging:
- 1, 5, 18 liters
Storage:
- In a shaded & cool place at room temp. with appropriate ventilation.
- Keep lid hermetically sealed.
Shelf life:
- 12 month in its original package.
Equipment cleaning:
- Clean with D-21 thinner immediately after the painting application is over.
Quality control:
- ISO 9001-2015
- In our factory’s laboratories under these
Denberdiuke 7 electric isolation nitro base
Electric isolation nitro paint/lacquer
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- Fire resistance of houses, hardwood and parquet floors, decks also
- Swelling paints for steel protection against fire – Fire retardant paint also
- Epoxy floor coating in casting and painting also
- Crystal epoxy resin for tables also
- To the article Sealing also
- The complete article on the sealing materials for roofs and walls also
- Sealing the floor of the balcony, terrace from rain also
- Mold, how to remove mold correctly and how to fight mold also
- “Sick” buildings – Antibacterial paints Bacterinoll/ Tutgum Bacterinol also
- Paint for aircraft Denbergloss Jets also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Denbergloss Clear also
- Varnish for wood. How to choose the right varnish for wood also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- For a free consultation, call Denber – Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794