Synthetic Paint TTE-527, general and camouflaged colors.
Top layer coat
PRODUCT: An air dry, lusterless alkyd enamel formulated for
use on primed exterior and interior metal and wood
surfaces. This enamel is low “VOC’ as well as lead
and chromate free.

Synthetic Paint TTE-527, general and camouflaged colors. www.denber-paints.co.il
Synthetic Paint TTE-527, general and camouflaged colors.
Top layer coat
PROPERTIES:
COLORS…………………………. Fed Std. 595B
VOLATILE ORGANIC COMPOUNDS……… 420 G/L Maximum
GLOSS……………………………… 4 Maximum
VISCOSITY(Reduced)………………. 70 KU Maximum
DRYING TIME-AT 75 DEGREES F:
SET-TO-TOUCH…………………… Within 2 Hours
DRY HARD………………………. Within 8 Hours
DRY THROUGH…………………… Within 48 Hours
ADVANTAGES:
(1). Interior / Exterior Use
(2). Lusterless Finish
(3). Meets TT-E-527
(4). Full Color Range, 595 Colors
USES:
(1). Steel
(2). Machinery
(3). Tanks
(4). Wood
(5). Equipment
(6). Towers
Synthetic Paint TTE-527, general and camouflaged colors.
Top layer coat
APPLICATION & REDUCTION:
Intrepid’s TT-E-527 Enamels can be applied by conventional or
airless spray application. For spraying, thin up to 10% or as
needed with Xylene. For brushing, use as is or with minimum
thinning with TT-T-306C Type I Reducer.
SURFACE PREPARATION:
Surface must be clean, dry and free of all contamination before
application. Prime and apply topcoat per specification
instructions. If used on previously painted surfaces, coating
must be reduced and tested on a small area for compatibility with
the existing coating.
STEEL:
Surface must be clean and free of all oil, grease and foreign
material. Badly rusted or pitted steel should be cleaned by
commercial sandblasting and primed the same day.
PRECAUTIONS:
Contents are FLAMMABLE.
Keep away from heat and open flame.
KEEP OUT OF THE REACH OF CHILDREN.
Do not take internally.
Avoid breathing vapor or mist.
Do not use in tank or pit without proper protection.
Read Material Safety Data Sheet before use of this product
Synthetic Paint TTE-527, general and camouflaged colors.
Top layer coat
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- Fire resistance of houses, hardwood and parquet floors, decks also
- Swelling paints for steel protection against fire – Fire retardant paint also
- Epoxy floor coating in casting and painting also
- Crystal epoxy resin for tables also
- To the article Sealing also
- The complete article on the sealing materials for roofs and walls also
- Sealing the floor of the balcony, terrace from rain also
- Mold, how to remove mold correctly and how to fight mold also
- “Sick” buildings – Antibacterial paints Bacterinoll/ Tutgum Bacterinol also
- Paint for aircraft Denbergloss Jets also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Denbergloss Clear also
- Varnish for wood. How to choose the right varnish for wood also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- For a free consultation, call Denber – Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794