Tutgum Denrel white Primer

Tutgum Denrel white Primer

Background white for fluorescent and fosfluorescent paints

Fast drying strong acrylic white primer for denrel system.

A single component acrylic universal primer, fast drying for walls, metals, plastics and wood for signs and others. The white shade of the paint used as the basis for reflective (fluorescent) and light emitting (posfluorescent) layers on it. High build,

Tutgum Denrel white Primer. www.denber-paints.co.il

Tutgum Denrel white Primer. www.denber-paints.co.il

Properties:

  • White reflective – suitable as basis to reflect the light of the light sensitive paints on it.
  • Flexible and powerful.
  • Excellent adhesion ability.
  • Easy to apply with a brush, roller, spray.
  • Dries quickly. Can be repainted after 1 hour
  • Resistance to scratches.
  • UV resistant.
  • High build, Applicable in few layers.
  • Heat and unregularly outdoor conditions

Applications:

  • Basic primer paint for light emitting and reflecting paints.
  • For painting primer coat on walls, doors, columns, products, Plastics, wood, metal, warning and guidance signs, cellars, public buildings etc. before painting fluorescent or posfluorescent paints.
  • For a general purpose painting includes various accessories and transportation.

Tutgum Denrel white Primer

Background white for fluorescent and fosfluorescent paints

Technical data:

  • Consumption: 100-200 gr/m2 (average: 0.18 kg/m2 )
  • Coverage- l liter/7-9 m2.
  • Flexibility- 1 mm (Sheen). Israel standard 935 part 307
  • Grinding: < 50 mic. Israel standard 785 part 15 – < 60 mic.
  • Density- 1.2-1.3 gr/cm3.
  • Resistance to immersion in water: no bubbles, no softness, no adhesion changes (standard 935 part 312)
  • Bleeding stability: not less than level 6 according ASTM D-868 and ASTM D-969
  • Resistance to fuels and solvents: stable according ASTM D-2792-93
  • Erosion: 120 micro film – 1050 cycle (BYK Gardner), ASTM D4060 200 mic. dry film – loos 2 grams weight to 500 cycles (the standard allows 5 grams loss)
  • Strength to pilling : > 5 kg/cm2
  • Resistance to heat 70OC: with no changes in properties or deformation.
  • Recommended number of layers – 2-3,
  • Viscosity- 0.5-1.5 Pa.Sec (Hakke).
  • Hardness- over 10 Dg (Erichsen).
  • UV durability: 5 years under sun (accelerated erosion test)

Content:

  • Acrylic co-polymer.
  • Pigments, fillers.
  • Special flexible materials.
  • Wetting materials.
  • Solvents and additives.

Colors:

  • White.

Gloss:

  • Matte, (Israel standard 935 part 309).

Touch-Dry:

  • 10-20 minutes (Avoid spraying with Over spray). (If formed dust Retarder must be added).

Tutgum Denrel white Primer

Background white for fluorescent and fosfluorescent paints

Dry Between Layers:

  • 5 hours, Final: 3 hours.

Implementing Method:

  • Brush, Spray, roller.

Dilution:

  • Brush/roller -– 5-10% thinner D-32.
  • Spray-.10-30% D-32 Thinner, 3-4 pressure.
  • Airless- 5-10% D-32 or D-11, 4-5 pressure, nozzle 0.015″.

Surface preparation:

  • New galvanization- gently polishing for removal of top zinc salt, and cleaning with Degreezer M for removal of dirt, grease, dust.
  • Old galvanization- rough polishing in rusty areas for removal of all rust and gentle polish for the rest for removal of top zinc salt, and cleaning with Degreezer M for removal of dirt, grease, dust.
  • Other surface – thoroughly clean from dirt, dust, grease.

Packing:

  • 1, 2.5, 5 and 18 liters.

Storage:

  • Store in well shaded place, room with appropriate ventilation.
  • Keep lids tightly closed.

Shelf Life:

  • 12 months in original pack.

Tools Cleaning:

  • At the end of the application with D-32 or D-21

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Tutgum Denrel white Primer

Background white for fluorescent and fosfluorescent paints

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Tutgum Denrel white Primer

Background white for fluorescent and fosfluorescent paints