Tutgum Denrel UV light glow

Tutgum Denrel UV light glow

Glows at ultra violet light

Tutgum Denrel UV light glow. www.denber-paints.co.il

Tutgum Denrel UV light glow. www.denber-paints.co.il

Tutgum Denrel UV light glow

Fast drying strong acrylic UV light glow paint.

Top/mid. coat acrylic paint glossy UV light reflective paint in FEW shades, for multipurpose needs on wood, iron, walls, glass etc. for warning, orientation and direction signs, cellars, shelters, vehicles, etc. must be painted on a white primer as background.

Properties:

  • Ready for use, on white Tutgum denrel primer.
  • Flexible and strong, decorative in few shades
  • Excellent adhesion to Denrel primer.
  • Easy to apply with a brush, spraying.
  • Dries quickly.
  • Limited resistance to sun exposure.

Applications:

  • Art painting glow at darkness in uv light on floors, walls, doors, ceilings, columns.
  • Marking hiding signs..
  • For effects with lights and darkness in dancing clubs etc.

Tutgum Denrel UV light glow

Glows at ultra violet light

Technical data:

  • Consumption: 100-200 gr/m2 (average: 0.18 kg/m2 )
  • Coverage- 1 liter/5-10 m2 (on white primer)
  • Flexibility- 1 mm (Sheen). Israel standard 935 part 307
  • Grinding: < 50 mic. Israel standard 785 part 15 – < 60 mic.
  • Density- 1.00-1.25 gr/cm3.
  • Resistance to immersion in water: no bubbles, no softness, no adhesion changes (standard 935 part 312)
  • Bleeding stability: not less than level 6 according ASTM D-868 and ASTM D-969
  • Resistance to fuels and solvents: stable according ASTM D-2792-93
  • Erosion: 120 micro film – 850 cycle (BYK Gardner), ASTM D4060 200 mic. dry film – loos 2 grams weight to 500 cycles (the standard allows 2.5 grams loss)
  • Strength to pilling : > 5 kg/cm2
  • Resistance to heat 70OC: with no changes in properties or deformation.
  • Recommended number of layers – 2-3,
  • Viscosity- 0.5-1.5 Pa.Sec (Hakke).
  • Hardness- over 3 Dg (Erichsen).
  • UV durability: 3-6 months in direct exposure to the sun.

Content:

  • Acrylic resins.
  • UV pigments, fillers.
  • Special flexible materials.
  • Wetting materials.
  • Solvents and additives.

Colors:

  • White. Yellow, blue, red, green,

Gloss:

  • Silky, (Israel standard 935 part 309).

Tutgum Denrel UV light glow

Glows at ultra violet light

Touch-Dry:

  • 10-20 minutes (Avoid spraying with Over spray). (If formed dust Retarder must be added).

Dry Between Layers:

  • 5 hours, Final: 3 hours.

Implementing Method:

  • Brush, Spray, roller.

Dilution:

  • Brush/roller -– 5-10% thinner D-32.
  • Spray-.10-30% D-32 Thinner, 3-4 pressure.
  • Airless- 5-10% D-32 or D-11, 5-6 pressure, nozzle 0.015″.

Surface preparation:

  • Thoroughly clean from dirt, dust, grease.
  • Must be painted on white Denrel primer.

Packing:

  • 1, 2.5, 5 and 18 liters.

Storage:

  • Store in well shaded place, room With appropriate ventilation.
  • Keep lids tightly closed.

Shelf Life:

  • 12 months in original pack

Tutgum Denrel UV light glow

Glows at ultra violet light

Tools Cleaning:

  • At the end of the application with D-32 or D-21 thinner.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Tutgum Denrel UV light glow

Glows at ultra violet light