Tutgum Denrel Post fluorescent light emitting. Denber paints

Tutgum Denrel Post fluorescent light emitting

Glow at night when lights are off

Fast drying strong acrylic light EMITTING paint

Top/mid. coat acrylic paint light emitting paint, for multipurpose needs on wood, iron, walls, etc. for warning, orientation and direction signs, cellars, shelters, etc. must be painted on a white primer as background.

Tutgum Denrel Post fluorescent light emitting. www.denber-paints.co.il

Properties:

Ready for use, on white Tutgum denrel primer.
Flexible and strong, decorative in yellow-green shade.
Excellent adhesion capacity.
Easy to apply with a brush, spraying.
Dries quickly.
Limited resistance to sun exposure.

Applications:

Floors, walls, doors, columns.
Marking shelters.
Guidance signs.
Warning signs.
Public buildings – warning and guidance signs.

Tutgum Denrel Post fluorescent light emitting

Glow at night when lights are off

Technical data:

Consumption: 100-200 gr/m² (average: 0.18 kg/m² )
Coverage- l liter/5-10 m2(on white primer)
Flexibility- 1 mm (Sheen). Israel standard 935 part 307
Grinding: < 50 mic. Israel standard 785 part 15 – < 60 mic.
Density- 1.3-1.45 gr/cm 3.
Resistance to immersion in water: no bubbles, no softness, no adhesion changes (standard 935 part 312)
Bleeding stability: not less than level 6 according ASTM D-868 and ASTM D-969
Resistance to fuels and solvents: stable according ASTM D-2792-93
Erosion: 120 micro film – 850 cycle (BYK Gardner), ASTM D4060 200 mic. dry film – loos 2 grams weight to 500 cycles (the standard allows 5 grams loss)
Strength to pilling : > 5 kg/cm2
Resistance to heat 70^OC: with no changes in properties or deformation.
Recommended number of layers – 2-3,
Viscosity- 0.5-1.5 Pa.Sec (Hakke).
Hardness- over 3 Dg (Erichsen).
UV durability: 3-6 months in direct exposure to the sun.

Content:

Acrylic resins.
Light emitting pigments, fillers.
Special flexible materials.
Wetting materials.
Solvents and additives.

Colors:

Yellow-green.

Gloss:

Silky, (Israel standard 935 part 309).

Touch-Dry:

10-20 minutes (Avoid spraying with Over spray). (If formed dust Retarder must be added).

Tutgum Denrel Post fluorescent light emitting

Glow at night when lights are off

Dry Between Layers:

5 hours, Final: 3 hours.

Implementing Method:

Brush, Spray, roller.

Dilution:

Brush/roller -– 5-10% thinner D-32.
Spray-.10-30% D-32 Thinner, 3-4 atm. pressure.
Airless- 5-10% D-32 or D-11, 5-6 atm. pressure, nozzle 0.015″.

Surface preparation:

Thoroughly clean from dirt, dust, grease.
Must be painted on white Denrel primer.

Packing:

1, 2.5, 5 and 18 liters.

Storage:

Store in well shaded place, room With appropriate ventilation.
Keep lids tightly closed.

Shelf Life:

12 months in original pack.

Tools Cleaning:

At the end of the application with thinner D-32 or D-21.

Tutgum Denrel Post fluorescent light emitting

Glow at night when lights are off

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Tutgum Denrel Post fluorescent light emitting