Tutgum Denrel Light reflec fluorescent colors. Denber paints

Tutgum Denrel Light reflec fluorescent colors

Glow and shine at day light in 8 colors

Tutgum Denrel Light reflec fluorescent colors. www.denber-paints.co.il

Fast drying strong acrylic light reflecting fluorescent paint

Top coat acrylic paint glossy light reflective paint in 8 shades, for multipurpose needs on wood, iron, walls, etc. for warning, orientation and direction signs, cellars, shelters, vehicles, etc. must be painted on a white primer as background.

Properties:

Ready for use, on white Tutgum denrel primer.
Flexible and strong, decorative in eight fluorescent shades
Excellent adhesion capacity.
Easy to apply with a brush, spraying.
Dries quickly.
Limited resistance to sun exposure.

Applications:

Floors, walls, doors, columns.
Marking shelters.
Guidance signs.
Warning signs, vehicles.
Public buildings – warning and guidance signs.

Tutgum Denrel Light reflec fluorescent colors

Glow and shine at day light in 8 colors

Technical data:

Consumption: 100-200 gr/m² (average: 0.18 kg/m² )
Coverage- 1 liter/5-10 m2 (on white primer)
Flexibility- 1 mm (Sheen). Israel standard 935 part 307
Grinding: < 50 mic. Israel standard 785 part 15 – < 60 mic.
Density- 1.1-1.25 gr/cm 3.
Resistance to immersion in water: no bubbles, no softness, no adhesion changes (standard 935 part 312)
Bleeding stability: not less than level 6 according ASTM D-868 and ASTM D-969
Resistance to fuels and solvents: stable according ASTM D-2792-93
Erosion: 120 micro film – 850 cycle (BYK Gardner), ASTM D4060 200 mic. dry film – loos 2 grams weight to 500 cycles (the standard allows 2.5 grams loss)
Strength to pilling : > 5 kg/cm2
Resistance to heat 70^OC: with no changes in properties or deformation.
Recommended number of layers – 2-3,
Viscosity- 0.5-1.5 Pa.Sec (Hakke).
Hardness- over 3 Dg (Erichsen).
UV durability: 3-6 months in direct exposure to the sun.

Content:

Acrylic resins.
Fluorescent pigments, fillers.
Special flexible materials.
Wetting materials.
Solvents and additives.

Colors:

Yellow, orange, blue, red, pink, green, white, lemon.

Gloss:

Silky, (Israel standard 935 part 309).

Tutgum Denrel Light reflec fluorescent colors

Glow and shine at day light in 8 colors

Touch-Dry:

10-20 minutes (Avoid spraying with Overspray). (If formed dust Retarder must be added).

Dry Between Layers:

5 hours, Final: 3 hours.

Implementing Method:

Brush, Spray, roller.

Dilution:

Brush/roller -– 5-10% thinner D-32.
Spray-.10-30% D-32 Thinner, 3-4 pressure.
Airless- 5-10% D-32 or D-11, 5-6 pressure, nozzle 0.015″.

Surface preparation:

Thoroughly clean from dirt, dust, grease.
Must be painted on white Denrel primer.

Packing:

1, 2.5, 5 and 18 liters.

Storage:

Store in well shaded place, room With appropriate ventilation.
Keep lids tightly closed.

Shelf Life:

12 months in original pack.

Tools Cleaning:

At the end of the application with D-32 or D-21 thinner.

Tutgum Denrel Light reflec fluorescent colors

Glow and shine at day light in 8 colors

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Tutgum Denrel Light reflec fluorescent colors