TutGum Denrel acrylic clear lacquer to protect against UV light

TutGum Denrel acrylic clear

Fast drying strong acrylic top coat protective lacquer.

TutGum Denrel acrylic clear. www.denber-paints.co.il

Acrylic lacquer top coat glossy, fast drying, UV resistant, for coating top clear layer over reflective (fluorescent) paints and light emitting paints (that glow at night and in darkness) protection from sun fading accelerated, strong and protective coatings and decorative. A final top coat protective for Denrel system.

Properties:

Ready for use.
Protects against accelerated fading light sensitive colors such as light emitting and light reflecting (fluorescent).
Flexible and strong,decorative lacquer.
Excellent adhesion capacity.
Easy to apply by brush and spraying.
Dries quickly.
Resistance to scratches.
UV resistant.

Applications:

Protection coat on light sensitive paints like fluorescent light reflective and light emitting paints that glows at darkness.
Painting of walls, doors, columns, products Plastic/wood /metal, warning signs and directions.
A general painting as a protective layer film from scratches, for any purpose including various accessories, and vehicles.

TutGum Denrel acrylic clear

Fast drying strong acrylic top coat protective lacquer.

Technical specifications:

Consumption: 100-200 gr/m²
Coverage: 1 liter to 5-10 sqm.
Solids: 40% (standard 785 part 17)
Flexibility: 1 mm (Sheen) (standard 935 part 307)
Grinding: < 50 micron (standard 785 part 15 < 60 micron)
Density: 0.9-1.1 gm/cm 3
Resistance to immersion in water: no bubbles, no softness, no adhesion changes (standard 935 part 312)
Bleeding stability: not less than level 6 according ASTM D-868 and ASTM D-969
Resistance to fuels and solvents: stable according ASTM D-2792-93
Viscosity: 0.5-1.5 Pa.sec (Haake)
Hardness: > 10 Dg (Erichsen)
Erosion: 120 micro film – 1250 cycle (BYK Gardner), ASTM D4060 200 mic. dry film – loos 2 grams weight to 500 cycles (the standard allows 5 grams loss)
Strength to pilling : > 5 kg/cm²
Resistance to heat 70^OC: with no changes in properties or deformation.
Number of recommended layers: 2
UV resistance: 5 years, accelerated durability in exposure to sun.

Contains:

Acrylic resin.
Special flexibility resin.
Wetting agents.
Solvents and additives.

Colors:

Clear.

Gloss:

Glossy (standard 935 part 309).

Touch-dry time:

10-30 minutes. (avoid over spraying)

TutGum Denrel acrylic clear

Fast drying strong acrylic top coat protective lacquer.

Drying time period between layer application:

5 hour. Final: 3 hours.

Application methods:

Brush, spray, roller.

Dilution:

Brush/roller: 5% – 10% D-32 thinner.
Spraying: 10% – 30% D-32 thinner pressure 3-4
Airless: 0-5% thinner D-32. Pressure 5-6 nozzle 0.015”-
If the lid left open and the paint become thickly, a thinner D-21 can be add to dilute the paint before painting.

Surface preparations:

Thoroughly clean any dirt’ dust’ grease or old paint.
Paint over mid. layer needs the protection.

Packaging:

1 liter, 2.5 liter, 5 liters, 18 liters.

Storage:

In a shaded and cool place at room temperature with proper ventilation.
Keep lids tightly sealed.

Shelf life span:

12 months in its original can.

Equipment cleansing:

Use thinner D-21.

TutGum Denrel acrylic clear

Fast drying strong acrylic top coat protective lacquer.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

TutGum Denrel acrylic clear