Topcolor Post fluorescent glow at night

Topcolor Post fluorescent glow at night

Light emitting discharge-bale glow at darkness

Synthetic high gloss light emitting at darkness paint when painted on white background primer, for multipurpose warning, guidance, signs etc, for painting on internal walls, doors, guidance sings, shelters,  traffic directing. Warning signs and guidance and orientation when the light off. For painting exits and escape routes in the case of emergency. Charges with light and emits it in darkness.

Topcolor Post fluorescent glow at night. www.denber-paints.co.il

Topcolor Post fluorescent glow at night. www.denber-paints.co.il

Topcolor Post fluorescent glow at night

Light emitting discharge-bale glow at darkness

Properties:

  • Can be applied on any white primer.
  • After light shuts off, shines in yellow-green bright light.
  • Easy to apply in any means.
  • Good mechanical strength.
  • Limited resistance for outdoor conditions.
  • Have to be coated outdoors with Denrel laquer for UV and climate defense.
  • Super bright light, very smooth coat.
  • Outstanding adherence to the surface.

Applications:

  • For painting on walls, doors, shelters. Public places like cinema and theater halls, busses, trains, airplanes, etc. all needed warning and guide signs have to be seen in darkness or in emergency situation with no light.
  • Signs and traffic directions at darkness.
  • Lines and direction gaudiness to exits in case of light shut down.
  • Headers and emergency exits.

Technical specifications:

  • Coverage area: 1 liter per 5-6 sqm. (on white primer coat) in 2 coats.
  • Recommended thickness: 80-120 mic. dry
  • Recommended number of layers: 2
  • Hardness: >3 Dg (Erichsen)
  • Viscosity: 2.5-3.5 Pa.sec (Haake)
  • Flexibility: 1 mm (Sheen)
  • Recommended layer thickness: 40-80
  • Density: 1.3-1.45 gm/cm3
  • Resistance to abrasion – 450 cycles (BYK Gardener)
  • UV endurance: 3-6 months, must be coated with uv durable lacquer for exterior use.

Topcolor Post fluorescent glow at night

Light emitting discharge-bale glow at darkness

Contains:

  • Synthetic resine.
  • UV resistance additives.
  • Fosfluorescent Pigments,
  • Driers, Flexible materials,
  • Solvents and additives.
  • Special fungicides and preservatives for long term outside conditions.
  • Wetting and leveling agents.
  • Thixotropic substances.

Colors:

  • Yellow-green.

Gloss:

  • Glossy.

Touch-dry time:

  • 2-4 hours.

Drying time period between layer applications:

  • 6 hours.  Final: 24 hours.

Implementing method:

  • Brush, spray, roller.

Topcolor Post fluorescent glow at night

Light emitting discharge-bale glow at darkness

Dilution:

  • Brush and roller- 5-10% mineral Turpentine .
  • Spray-.12-30% D-18 Thinner, 3-4 pressure.
  • Airless- 5-10% D-18 Thinner, 5-6 pressure, nozzle 0.015″.
  • Immersion-60-80% mineral turpentine.

Surface preparations:

  • Clean the surface from all the dirt, dust, grease and shaky or loose paint.
  • Wood: sand well, fill halls with denberschpachtel for wood. Apply a denbercoat primer white.
  • Metal- Cleaning the metal to “white metal” level and primer painting with Denberust white.
  • Walls: wash with water in 150 atm. Pressure if dirty, fill all cracks and halls with Denber Schpachtel acrylic for exterior walls and interior with Denberschpachtel. Apply primer white coat of denbertex primer.

Primer:

  • Iron metals – Denberust white, Epoxyden primer white,
  • Galvanized steel – Tutgum galvanize white.
  • Wood – Denbercoat, Compact schpachtel
  • Walls, Plaster, concrete, asbestos – Denbertex primer

Packaging:

  • 0.75 liter, 2.5 liter, 5 liters, 18 liters

Storage:

  • In a shaded and cool place at room temperature with appropriate ventilation.
  • Keep lids close.
  • The product isn’t resistant to freeze (except the export model)

Topcolor Post fluorescent glow at night

Light emitting discharge-bale glow at darkness

Shelf life span:

  • 12 months in its original pack.

Equipment cleaning:

  • With water immediately after usage.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of  contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Topcolor Post fluorescent glow at night

Light emitting discharge-bale glow at darkness