Epoxyden Dengal Swimming Pools paint. Denber Paints & coatings

Epoxyden Dengal Swimming Pools paint

Epoxy paint for swimming pools

Epoxyden Dengal Swimming Pools paint. www.denber-paints.co.il

Primer/top coat paint for swimming pools and water/sewage reservoirs concrete or aluminum. Special high build multi-layer epoxy coat with high durability under contaminated and chlorine water and exposure to sun. Blue standard color and others for marking.

Epoxyden Dengal Swimming Pools paint

Epoxy paint for swimming pools

Properties:

Heavy duty, high build.
Fast drying, ready for recoating after 6 hour.
Tough, scratch resistance.
Good adhesion to concrete, fiberglass and aluminum.
Can be applied in some layers for thick coat.
Ready for use.
Resistant to salt, chlorine and wet environment and durable in oils, fuels and solvent.
Expansion and shrinkage accordance to infrastructure.

Applications:

Swimming pools.
Water reservoirs.
Dams and pipes.
Pumping stations, pumps, wells etc.

Technical Data:

Theoretical coverage: 8-9 m 2/liter for 130 mic. wet.
Recommended dry film thickness: 80 mic.
Recommended number of layers: 2-3
Density: 1.2-1.4 gm/cm3.
Hardness: >3 Dg (Erichsen)
Elasticity: 1 mm (Sheen)
Viscosity: 1.5-2.2 Pa.sec (Haake)
Mixing ratio A:B – 2.5:1
Flash point: 27 °c
Pot life: 6 hr.
Adhesion to metal: 215 Kg/cm2 to aluminum – 180 kg/cm2

Contains:

- Special Epoxy resins.
- Flexible materials.
- Additives.
- Pigments and fillers

Colors:

Blue, black, red.

Epoxyden Dengal Swimming Pools paint

Epoxy paint for swimming pools

Gloss:

Silky.

Touch-dry time:

2-3 minutes (avoid over spray).

Repainting Gap Time:

16 hours, final – 24 hours. Filling Water after 2-3 days.

Recommended Application Methods:

Spray, brush, roller.

Dilution:

Spray gun – 25-35% thinner D-4/100 pressure 4-5 atm.
Airless – 5-10% D-4/100, pressure 6-7 atm. nozzle- 0.021″/0.023″
Roller/brush- 5% D-4/100.

Surface Preparation:

Mechanical or chemical cleaning until concrete is clean, dry and the porous are open after vacuum.
Aluminum – Spread Antarox 4 and flash with water, spread passivator 1722 and flash water.
Mechanical: steel brushes ST-2.5.
Chemical: rust -“rust remover 3000”, grease -“Degreazer M”.
Sand blasting cleaning (is the most recommended system for preparing surface) – level of cleaning SA- 2.5.

Instruction for Use:

Surface preparation as recommended.

Open carefully parts a & b and stir separately well.
Pour needed quantity ratio base to hardener 2.5:1
Blend well for homogenous mixture and add thinner D-4/100 as recommended.
Blend again and spray first coat, after 4-6 hours minimum sand a little and spray second layer and etc.

Epoxyden Dengal Swimming Pools paint

Epoxy paint for swimming pools

Kit Description:

3.6 liter part A + 1.4 liter part B = 5 liter
13 liter part A + 5 liter part B = 18 liter

Storage:

Appropriate cool and shaded room in room temp. with proper ventilation.
Keep lids tightly closed.

Shelf Life:

12 month in original sealed package.

Clean Up:

Clean with thinner D-4/l 00 immediately after complete painting.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2008

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.

Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Epoxyden Dengal Swimming Pools paint