Denway road marking Chlorinated rubber white

Denway road marking Chlorinated rubber white

Road marking fast drying white paint

Denway road marking Chlorinated rubber. www.denber-paints.co.il

Denway road marking Chlorinated rubber. www.denber-paints.co.il

Erosion durable fast drying hard coat road marking paint

Solvent dilution, smooth & decorative top coat road marking paint for asphalt and concrete roads and sidewalks with excellent adhesion to infrastructure. The paint is very strong and durable, suitable for outdoor extreme conditions including heat & cold, sunlight (U.V.) etc. White and in durable standard shades (yellow, black. blue, red, ornge). Suitable for much vehicular traffic day and night. On day light striking from distance and at night (because the glass beads been scattered on it while it was painted before it dry’s), creates a refund light from long distance.

Properties:

  • Striking paint and seen from great distance, durable in outdoor conditions.
  • Flexible and rigid. Penetrates deep into the grooves and fills cracks in asphalt and concrete.
  • Perfectly water resistant, suitable for winter heavy rains, not falling apart.
  • Excellent adhesion capacity to infrastructure.
  • The adhesion power of the paint allows coating it with glass beads.while wet.
  • Easy to apply and dries quickly.
  • Abrasion and scratches resistant. Durable in the heat of the asphalt in the summer.
  • Resistant to fuels and oils.
  • Fast drying, ready for repainting at the same day and within hours in the summer if necessary. The fast drying allows the opening of a road within 30 minutes.after painting.
  • High coverage area – cost-effective paint.

Denway road marking Chlorinated rubber white

Road marking fast drying white paint

Applications:

  • Road marking asphalt and concrete paint for urban roads and fast roads.
  • Marking sidewalks and traffic islands.
  • Marking parking lots.
  • Painting pedestrian crossings.
  • Marking floors warehouses, shelters, garages and so on.

Technical Data:

  • Theoretically area covered: 1 liter for 10 Hiding ability minimum 0.9 (Israel standard 935 part 306)
  • Consumption for new asphalt road: 1 liter for 1.3-2.0 sqm. depends on asphalt quality.
  • Consumption for old asphalt road: 1 liter for 2.0 sqm.
  • Solids content by volume: > 70 % (standard 785 part 17)
  • Pigments quantity: 65% (standard 785 part 19)
  • Flexibility: l mm (Sheen). (standard 935 part 307)
  • Grinding : < 50 micron (standard 785 part 15 – < 60 mic.)
  • Density: 1.45-1.6 gm/cm3
  • Viscosity: 1.5-2.5 Pa.sec (Haake) 78-92 Krebs in 200 cycle/minutes after mixing by hand for 2 minutes (standard 935 part 302) after dilution 10% with thinner – 65 Krebs. After 10 days storage in 42 OC – viscosity will grow < 5 Krebs.
  • Durability in water immersion: no bubbles, no softening, no changes in adhesion, (Israel standard 935 chapter 312)
  • Bleeding durability: not less than level 6 (ASTM D-868 and ASTM D-969)
  • Durability in solvents and fuels: ASTM D-2792-93
  • Hardness: >10 Dg (Erickson)
  • Erosion 120 mic. film – 850 cycles (BYK Gardner), american standard ASTM D4060 – 200 mic. film, loss of weight 2 gr. To 500 cycles (2.5 aloud)
  • Recommended layer thickness 200 microns wet
  • Recommended number of layers: 1
  • Quantity of glass beads: 100-150 gr. /sqm.

Denway road marking Chlorinated rubber white

Road marking fast drying white paint

Contents:

  • Chlorinated rubber.
  • Fillers, pigments
  • (calcium carbonate 99% pure)
  • Abrasion fillers.
  • (Tio2 acc. ASTM D576 sort 4)
  • Flexibility materials.
  • Wetting and leveling materials.
  • Solvents
  • Additives

 Color:

  • White standard.

Gloss:

  • < 18% (Israel standard 935 part 309)

Touch dry time:

  • 15 min. (a very fast drying paint, avoid over spray). Drying time with a wheel –

< 45 minutes, (standard 935 part 304 change 2)

  • In case there is over spray – add retarder as needed and reduce air pressure

Time to oper road for driving:

  • Summer : 30 min.
  • Winter: 45 minutes.

Methods of application:

  • Asphalt: Spray.
  • Concrete: spray, brush, roller.

Denway road marking Chlorinated rubber white

Road marking fast drying white paint

Dilution:

  • Brush/roller: 5% thinner D-18
  • Spraying: 20-30% thinner D-18 pressure 3-4 atm.
  • Airless: 0-5% thinner D-18, nozzle 0.018” for thin layer and nozzle 0.021” for thick layer.

Surface preparations:

  • Remove any dirt, dust, grease or loose paint from the surface before coating with this paint. Wash and brush roughly with Degreezer Z – to remove oils.
  • Clean according the Israel standard 935.

Packaging:

  • 5 liters, 18 liters.

Storage:

  • In a shaded and cool place at room temperature with proper ventilation.
  • Keep lids tightly closed.

Shelf life:

  • 12 months in its original packages

Equipment cleansing:

  • Use thinner D-18 at the end of painting..

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Denway road marking Chlorinated rubber white

Road marking fast drying white paint

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Denway road marking Chlorinated rubber white

Road marking fast drying white paint