Denway Рolyurethane road marking paint
Two component long lasting road marking paint
A high quality Polyurethane aliphatic paint, two components for road marking powerful and UV resistant coat, washable and very repulsive dirt. For renewing existing colors. Not suitable for painting directly on the asphalt (only on old paint or on a layer of dry Denway as a primer)
The paint is particularly strong, multi solids, rejects dirt and dust, Fuel and oil resistant and provides smooth and very strong abrasion resistant and suitable for use in the ongoing drive vehicles roads of all kinds. The paint has a coefficient of sliding, which prevents dirt adhesion and easy to wash repeated un-limited times.
Decorative smooth and durable in erosion in harsh environment, does not fade despite long exposure to the sun. White and in durable standard shades (yellow, black. blue, red, ornge). Suitable for much vehicular traffic day and night. On day light striking from distance and at night (because the glass beads been scattered on it while it was painted before it dry’s), creates a refund light from long distance.
Denway Рolyurethane road marking paint
Two component long lasting road marking paint
Properties:
- Bold color and luster from far.
- Abrasion resistant.
- Resistant to outdoor conditions and harsh climate
- Excellent adhesion capacity to infrastructure.
- Resistant to fuels and oils.
- Quick drying.
- Ready for additional painting and \ or coating the same day and within a few hours in the summer.
- Excellent long durability to direct sun.
- Flexible and rigid one.
- Very washable dust and dirt repellent.
- Resistance to heat and cold.
- Very high gloss or other by demand, durable for many years.
- Quick drying.
- Does not contain cadmium, lead, and chromates.
- High solids quantity, economical, suitable for painting high build layers.
Applications:
- For renewal of existing road paints of pedestrian crossings, dividing lines, curbs, parking lots, traffic islands and more …
Technical data:
- Part 1 –can be easily blended manually for smooth and uniform solution is 5 minutes.
- Part II – to be transparent and clear.
- Storage durability – 24 hours in 570 C without sagging.
- Theoretical coverage: 1 liter to 10-15 sqm
- Practical consumption: 1 liter for 5-8 sqm.
- Hiding power — all colors except yellow >0.95, yellow >0.9 in dry layer with thickness of 58 micron.
- Recommended thickness- 40-60 micron dry layer.
- Recommended number of layers – 1
- Flexibility – 1 mm (Sheen)
- Elongation: >8%
Two component long lasting road marking paint
- Density – 1.2-1.3-gm\cm3
- Average viscosity A + B – 20,000 cPs (Brookfield)
- Viscosity glossy paints B + A – 17-23 seconds in # 2 (>95 krebs)
- Hardness – >10 Dg (Erichsen)
- Abrasion – 120 microns – 1500 cycles (BYK Gardner)
- Ratio A:B – 2:1
- Diluted paint durability in can – 6 hours (increased viscosity of no more than 6 seconds from original viscosity)
- Grinding- glossy paints <7 Hegman, Matt <5 Hegman
- Gloss in 600 for glossy paints – >80%, for silky paynts – 15-45%, for matte paints – <5%
- Shade changes allowed – Delta E –< 1.0
- Pot life = work time after mixing B + A – <4 hours.
- Distilled water resistant 24 hours – without losing adhesion or corrosion inspected 1 hour after pooling out of the liquid.
- Carbons resistance – without losing adhesion inspected 1 hour after pooling out of the liquid.
- Resistance to oil 1250 24 hours at 121OC- without losing adhesion inspected 4 hours after pooling out of the liquid.
- Resistance to hydraulic oil 24 hour in 66OC – without losing adhesion inspected 4 hours after pooling out of the liquid.
- Jet fuel resistance – 7 days in room temperature- without losing adhesion inspected 4 hours after pooling out of the liquid.
- Heat resistance durability – 121OC for 60 minutes. No color shade changes up to Delta E = <
- Humidity cell durability – 30 day 100% humidity temperature 49OC – without losing adhesion or damage to the film 1 hour after the release of the liquid.
- Salt spray chamber – with no rust.
- Thermal shock – without losing adhesion.
- Paint remover – epoxy paint remover MZ-83
- Solids content – in glossy 68% , silk and matte – >45%, clear >35%
Denway Рolyurethane road marking paint
Two component long lasting road marking paint
Contains:
- Polyol.
- Fillers, durable pigments.
- Flexibility materials.
- Special alkyd.
- Solvents, additives
- Part b – aliphatic isocyanate UV durable, special mixture.
Color :
- White, yellow, blue, red, black.
Gloss:
- Matte/Silk/ Glossy
Touch-dry time:
- 20 minutes, for vehicle driving 30-60 minutes, in winter 45-75 minutes, final dry in 2 days..
Drying time between layers:
- For an extra layer – 2-3 hours, according temp..
Application method:
- Brush, roller, spraying.
Dilution:
- No dilution is better. For spraying – as needed until 35%
Denway Рolyurethane road marking paint
Two component long lasting road marking paint
Surface preparation:
- Thorough cleaning, grease, dirt and loose paint according the Isrel standard 935.
- Spread Degreezer Z if there is oil, rub the asphalt with industrial brushes or broom and wash with high pressure water.
Packaging:
- 3.35 + 1.65 = 5 liters.(ratio- 2:1),
Storage:
- In a cool and shady room temperature with appropriate ventilation.
- Keep lids sealed.
Shelf life:
- 12 months in original package.
Tools cleaning:
- Thinner D-11 at the end of painting.
Quality control:
- In factory laboratories according to specifications.
- COA and COC certificate.
- ISO 9001-2015
Denway Рolyurethane road marking paint
Two component long lasting road marking paint
Safety precautions:
- Inedible, keep away from the reach of children.
- Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
- While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
- Wear protective glasses, gloves and suits.
- Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
- In case of an injury immediately get doctors assistance.
- Read the safety instructions on the labels.
- See M.S.D.S
Denway Рolyurethane road marking paint
Two component long lasting road marking paint
- Visit our sites: www.denber-paints.co.il
- www.denber-colors.co.il
- Varnish for wood. How to choose the right varnish for wood
- Thermal isolation Thermoseal 200 energy saving in green construction
- Crystal epoxy resin for tables
- Fire resistance of houses, hardwood and parquet floors, decks
- Sealing the floor of the balcony, terrace from rain
- Thin floor nano-coverings for industrial refrigerators and freezers
- Epoxy floors – Benefits of epoxy floors
- Swelling paints for steel protection against fire – Fire retardant paint
- As part of the restoration of buildings – concrete restoration at the Yad Kennedy site
- Paint for aircraft Denbergloss Jets
- Complicated sealing based on innovative technologies
- Reconstruction project of a unique house (Israeli house of architect Gaudi); Renovation of condominiums
- The work on the floor covering and restoration of the sports hall has been completed
- Denber has developed an innovative solution for thermal insulation works
- Mold, how to remove mold correctly and how to fight mold
- “Sick” buildings – Antibacterial paints destroys viruses / bacteria – Bacterinoll/ Tutgum Bacterinol
- Denber – floor coating using epoxy and polyurethane – find out what is suitable for you epoxy floor or polyurethane floor
- Epoxy floor coating and epoxy paints