Denbergloss Dengal water slides paint. Denber paints and coatings

Denbergloss Dengal water slides paint

Polyurethane aliphatic paint for water slides

Polyurethane two component top coat paint, pure acrylic, UV durable in aggressive and abrasive with chloral conditions. High skating coefficient. Flexible glossy in many colors for fiberglass, polyester, plastics water slides.

Hard top coat, multi-solids, decorative smooth, can be applied in several layers. Does not fade despite long exposure to the sun.

Denbergloss Dengal water slides paint. www.denber-paints.co.il

Properties:

Excellent durability to abrasion.
Smooth finish and tough. High skating coefficient.
Flexible for bending and rigid one.
Very washable dust and dirt repellent.
High hardness, suitable for outdoor conditions in chemicals environment.
Excellent adhesion capacity to infrastructure. Strengthen the infrastructure from hits and scratches and mechanical damage.
Easy to implement.
UV resistant, resistant to exterior harsh environment conditions and freezing.
Resistance to heat and cold.
Very high gloss durable for many years.
Quick drying.
Does not contain cadmium, lead, and chromates.

Applications:

Painting top layer for water slides.
Painting surfaces and various plastic products after removing the infrastructure tensile strength with degreezer M.

Denbergloss Dengal water slides paint

Polyurethane aliphatic paint for water slides

Technical data:

Part 1 –can be easily blended manually for smooth and uniform solution is 5 minutes.
Part II – to be transparent and clear.
Storage durability – 24 hours in 570 C without sagging.
Theoretical coverage: 1 liter to 10-15 sqm
Practical coverage: 1 liter to 8 m2.
Hiding power — all colors except yellow >0.95, yellow >0.9 in dry layer with thickness of 58 micron.
Recommended thickness- 120 micron wet layer.
Recommended dry layer – 70-80 micron.
Recommended number of layers – 2
Flexibility – 1 mm (Sheen)
Density – 1.1-1.2-gm\cm3 (0.9 clear lacquer)
Average viscosity A + B – 1-2 Pa.sec
Viscosity glossy paints B + A – 17-23 seconds in # 2 (>95 krebs)
Hardness – >10 Dg < (Erichsen)
Abrasion – 120 microns – 3600 cycles (BYK Gardner)
Ratio A:B – 2:1
Diluted paint durability in can – 6 hours (increased viscosity of no more than 6 seconds from original viscosity)
Grinding- glossy paints <7 Hegman,
Gloss in 600 for glossy paints – >80%,

Polyurethane aliphatic paint for water slides

Shade changes allowed – Delta E –< 1.0
Pot life = work time after mixing B + A – <4 hours.
Distilled water resistant 24 hours – without losing adhesion or corrosion inspected 1 hour after pooling out of the liquid.
Carbons resistance – without losing adhesion inspected 1 hour after pooling out of the liquid.
Resistance to oil 1250 24 hours at 121^OC- without losing adhesion inspected 4 hours after pooling out of the liquid.
Resistance to hydraulic oil 24 hour in 66^OC – without losing adhesion inspected 4 hours after pooling out of the liquid.
Jet fuel resistance – 7 days in room temperature- without losing adhesion inspected 4 hours after pooling out of the liquid.
Heat resistance durability – 121^OC for 60 minutes. No color shade changes up to Delta E = <1.
Humidity cell durability – 30 day 100% humidity temperature 49^OC – without losing adhesion or damage to the film 1 hour after the release of the liquid.
Salt spray chamber 2000 hr.– with no rust.
Thermal shock – without losing adhesion.
Paint remover – epoxy paint remover MZ-83
Solids content –66.0% ,

Denbergloss Dengal water slides paint

Polyurethane aliphatic paint for water slides

Contains:

Polyol acrylic
Fillers, durable pigments.
Flexibility materials.
Glycols.
Solvents, additives
Part b – aliphatic isocyanides UV durable, special mixture.

Color :

Blue, red, yellow, orange and all RAL catalogue shades.

Gloss:

Glossy.

Touch-dry time:

20-30 minutes. .

Drying time between layers:

For an extra layer – 6-8 hr. final drying – 12-16 hours.

Application method:

Brush, roller, spraying.

Dilution:

Spraying – 30-35% thinner D-11, pressure 3-4 atm.
Brushing/roller – you can without diluting or up to 20% thinner D-11 if a smudge lines or “orange peel” effect occurs at the time of application.
In summer for slow down the drying and prevent OVER SPRAY recommended to add retarder.

Surface preparation:

Thorough cleaning, grease, dirt and loose paint.
Sand with glass paper and blow with air pressure to remove dust.
Fill holes and sockets with Epoxyden Schpachtel.
Primer fixing or new primer layer with: Epoxyden Primer HB19 (Solcoat)

Denbergloss Dengal water slides paint

Polyurethane aliphatic paint for water slides

Primer paint:

Epoxyden HB 19 after cleaning with degreezer M

Packaging:

3.35 + 1.65 = 5 liters.

Storage:

In a cool and shady room temperature with appropriate ventilation.
Keep lids sealed..

Shelf life:

12 months in original package.

Tools cleaning:

Thinner D-11 at the end of painting.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.

Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Denbergloss Dengal water slides paint

Polyurethane aliphatic paint for water slides

Environment conditions for application:

The paint must be mixed until homogeneous and ready for application. The temperature critical limits in the painting booth are 16^OC-38^OC, recommended working temp.: 20OC-32OC, the humidity critical limits are 20%-80%, recommended working humidity: 20%-65%