Denbercryl Fosfluoroscent light emitting
Light emitting recharge able glow at darkness
Acrylic water base emits light in darkness, high quality paint for painting interior walls, doors and shelters, etc. warning signs and guidance and orientation when the light off. For painting exits and escape routes in the case of emergency. Charges with light and emits it in darkness.
Properties:
- Can be applied on any white primer.
- After light shuts off, shines in yellow-green bright light.
- Easy to apply in any means.
- Good mechanical strength.
- Limited resistance for outdoor conditions.
- Have to be coated outdoors with Denrel laquer for UV and climate defense.
- Super bright light, very smooth coat.
- Outstanding adherence to the surface.
- Easy to apply, rapid drying (additional layer may be painted within 1 hour)
Applications:
- For painting on walls, doors, shelters. Public places like cinema and theater halls, buses, trains, airplanes, etc. all needed warning and guide signs have to be seen in darkness or in emergency situation with no light.
- Signs and traffic directions at darkness.
- Lines and direction gaudiness to exits in case of light shut down.
- Headers and emergency exits.
Denbercryl Fosfluoroscent light emitting
Light emitting recharge able glow at darkness
Technical specifications:
- Coverage area: 1 liter per 5-6 sqm. (on white primer coat)
- Recommended thickness: 80-120 mic. dry
- Recommended number of layers: 2
- Hardness: >3 Dg (Erichsen)
- Viscosity: 2.5-3.5 Pa.sec (Haake)
- Flexibility: 1 mm (Sheen)
- Recommended layer thickness: 40-80 mic.
- Density:1.3-1.45 gm/cm 3
- Resistance to abrasion – 350 cycles (BYK Gardener)
- UV endurance: 3-6 months, must be coated with uv durable lacquer for exterior use.
Contains:
- High quality acrylic emulsion.
- Advanced flexibility and leveling material.
- Fosfluorescent pigments.
- Fillers.
- Special fungicides and preservatives for long term outside conditions.
- Wetting and leveling materials.
- Thixotropic substances.
- Additives.
Colors:
- Yellow-green.
Gloss:
- Matte
Touch-dry time:
- 2-4 hours.
Denbercryl Fosfluoroscent light emitting
Light emitting recharge able glow at darkness
Drying time period between layer applications:
- 6 hours, Final: 24 hours.
Implementing method:
- Brush, spray, roll
Dilution:
- Brush/roller: 5-10% water.
- Spray: 12-30% water.
- Airless: 5%-10% Pressure 5-6 atm. nozzle 0.015”
Surface preparations:
- Clean the surface from all the dirt, dust, grease and shaky or loose paint.
- Wood: sand well, fill halls with denberschpachtel for wood. Apply a denbercoat primer white.
- Walls: wash with water in 150 atm. Pressure if dirty, fill all cracks and halls with Denber Schpachtel acrylic for exterior walls and interior with Denberschpachtel. Apply primer white coat of denbertex primer.
Primer:
- Iron – Denberust white, Epoxyden primer white,
- Galvanized steel – Tutgum galvanize.
- Wood – Denbercoat, Compact schpachtel
- Walls – Denbertex primer
Packaging:
- 1 liter, 5 liters, 18 liters.
Storage:
- In a shaded and cool place at room temperature with appropriate ventilation.
- Keep lids close.
- The product isn’t resistant to freeze (except the export model)
Denbercryl Fosfluoroscent light emitting
Light emitting recharge able glow at darkness
Shelf life span:
- 12 months in its original pack.
Equipment cleaning:
- With water immediately after usage..
Quality control:
- In factory laboratories according to specifications.
- COA and COC certificate.
- ISO 9001-2015
Safety precautions:
- Inedible, keep away from the reach of children.
- While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
- Wear protective glasses, gloves and suits.
- Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
- In case of an injury immediately get doctors assistance.
- Read the safety instructions on the labels.
- See M.S.D.S
Denbercryl Fosfluoroscent light emitting
Light emitting recharge able glow at darkness
- Visit our sites: www.denber-paints.co.il
- www.denber-colors.co.il
- Varnish for wood. How to choose the right varnish for wood
- Thermal isolation Thermoseal 200 energy saving in green construction
- Crystal epoxy resin for tables
- Fire resistance of houses, hardwood and parquet floors, decks
- Sealing the floor of the balcony, terrace from rain
- Thin floor nano-coverings for industrial refrigerators and freezers
- Epoxy floors – Benefits of epoxy floors
- Swelling paints for steel protection against fire – Fire retardant paint
- As part of the restoration of buildings – concrete restoration at the Yad Kennedy site
- Paint for aircraft Denbergloss Jets
- Complicated sealing based on innovative technologies
- Reconstruction project of a unique house (Israeli house of architect Gaudi); Renovation of condominiums
- The work on the floor covering and restoration of the sports hall has been completed
- Denber has developed an innovative solution for thermal insulation works
- Mold, how to remove mold correctly and how to fight mold
- “Sick” buildings – Antibacterial paints destroys viruses / bacteria – Bacterinoll/ Tutgum Bacterinol
- Denber – floor coating using epoxy and polyurethane – find out what is suitable for you epoxy floor or polyurethane floor
- Epoxy floor coating and epoxy paints