Tutgum Anti-flame fire retardant paint

Tutgum Anti-flame fire retardant paint to protect from fire.

Fire retardant paint to protect from fire

Tutgum Anti-flame fire retardant paint www.denber-paints.co.il

Tutgum Anti-flame fire retardant paint www.denber-paints.co.il

High build special polymer, fast drying primer/top coat fire retardant

Organic fire retardant paint that prevent fire expansion and deject smoke, primer/top fast dry, high build made of special polymers. high build, decorative in high heat resistant tints, being used to protect concrete surfaces, metal and more, that prevent fire expansion in case of fire. Content flame retardant materials that emits gas that stops the fire expansion.

Tutgum Anti-flame fire retardant paint to protect from fire.

* Tested by the standards institution of israel-standard 755 level V Test No. 9211900051 mark 5.3.2

Tutgum Anti-flame fire retardant paint to protect from fire.

Fire retardant paint to protect from fire

Properties:

  • Ready for use. Flexible and strong.
  • Fast drying, ready for recoating after 2
  • Good adhesion to metal, concrete, wood p.v.c., plastic etc..
  • Adhesion power keeps the impregnation IFR-30 inside the absorbent material and do not allow it to dilute and wash out with rain or humidity.
  • Fire retardant delay starting of fire on an y surface including plastics until the fire go through it and dilute the flammable plastic.
  • Can be applied in one layer of 125 micron
  • Prevent development of rust on some tints (grey, black, mustard and red/brown).
  • Easy to apply with brush, roller, spray.
  • Prevent fire expansion and deject
  • Resistant to salt and wet

Applications:

  • Top coating to absorbing materials impregnated with IFR-30 for deep fire protection from internal ignition, and seals it from rain or humidity contact than can dilute the IFR30 and wash it out..
  • For fire protection to carpets, curtains, textile, wooden floors and walls and ceilings, wooden homes etc.
  • For fire protection to paper and carton.
  • Decoration painting of iron metals, protection from fire expansion on Denbercryl Antiflame intumescent to protect it from humidity and direct sun rays.
  • For coating flammable plastic elements for delaying fire,
  • For protection on sensitive areas from fire
  • Instantly treatment on a surface that being painted, in area that being used for fireworks, welding, or in area with
  • Prevent fire expansion in case of

Tutgum Anti-flame fire retardant paint to protect from fire.

Fire retardant paint to protect from fire

Technical Data:

  • Consumption spreading rate: 200-250 grams/sqm. depends on impregnation ability.
  • % solids: 48% (standard 785 part 17)
  • Quantity of pigment: 65% (standard 785 part 19)
  • Flexibility: 1 mm (Sheen) (standard 935 chapter 307)
  • Grinding: <50 mic. (standard 785 part 15 until 60 mic.)
  • Density: 45-1.6 gm/cm3, lacquer 0.9 gm/cm3
    • Resistance to immersion in water: no bubbles, no softness, no adhesion changes (standard 935 part 312)
    • Bleeding stability: not less than level 6 according ASTM D-868 and ASTM D-969
    • Resistance to fuels and solvents: stable according ASTM D-2792-93
    • Viscosity: 5-2.5 Pa.sec (Haake) 78-92 krebs in 200 cycles per minutes after hand mix of 2 minutes (standard 935 part 302), after dilution 10% – 65 krebs. After 10 days storage in 42OC – viscosity aloud to grow max. 5 krebs.
    • Hardness: > 10 Dg (Erichsen)
    • Erosion: 120 micro film – 1050 cycle (BYK Gardner), ASTM D4060 200 mic. dry film – loos 2 grams weight to 500 cycles (the standard allows 5 grams loss)
    • Strength to pilling : > 5 kg/cm2
    • Resistance to heat 70OC: with no changes in properties or deformation.
    • Recommended layer thickness: 200-250 microns wet.
    • Number of recommended layers as primer: 2
    • Number of recommended layers as top coat: 1

Tutgum Anti-flame fire retardant paint to protect from fire.

Fire retardant paint to protect from fire

Contain:

  • Chlorinated rubber and acrylic
  • Flexible
  • Flame retardants
  • Pigments, fillers
  • Additives

Colors:

  • Lacquer: clear yellowish,
  • Paint : white color – standard.
  • Any color by order.

Gloss:

  • Matte <18%, silk 30-45%, gloss 80-95% (standard 935 chapter 309)

Touch-drying time:

  • 15-25 minutes, wheel dry : <45 minutes (standard 935 chapter 304 appendix 2) (avoid spraying with Over Spray).
  • If formed dust on the surface, a “Retarder” must be

Tutgum Anti-flame fire retardant paint to protect from fire.

Fire retardant paint to protect from fire

Repainting Gap Time:

  • 2-4 hours : 6 final

Recommended Application Methods:

  • Spray, Ready for use only mix it well.
  • Durable to solvents roller.

Dilution:

  • Lacquer is ready for use with out thinner. If needed for the paint a thinner d-18 can added for spraying or D-32 for brushing.
  • Airless- 5-10% Thinner D-21, pressure  5-6 nozzle- 0.021″
  • If the lid left open and the paint is to viscous: add thinner D-21 and mix for the right viscosity.

Surface Preparation:

  • Mechanical or chemical cleaning until a white metal
  • Mechanical: steel
  • Chemical: rust -“Degreazer 3000”, grease -“Degreazer M”.
  • Sand blast cleaning: level SA 5.
  • For plastics: grease removing with Degreezer AA, sand lightly for roughly surface and complete gloss removing and clean again with Degreezer AA

Tutgum Anti-flame fire retardant paint to protect from fire.

Fire retardant paint to protect from fire

Kit Description:

  • 1 liter, 2.5, 5, 18 and 200 liters.

Storage:

  • Appropriate shaded room with appropriate ventilation.
  • Keep lids tightly sealed.

Shelf Life:

  • 12 months in original sealed

Clean up:

  • Clean with thinner D-21 immediately after complete

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Tutgum Anti-flame fire retardant paint to protect from fire.

Fire retardant paint to protect from fire