Topcolor Silverstar Bright Aluminum paint 100° C
Synthetic paint for heat up to 100°C.
Synthetic Bright decorative Aluminum paint for hot areas, withstands up to 100°C, offering resistance and protection for universal applications.
Topcolor Silverstar Bright Aluminum paint 100° C
Synthetic paint for heat up to 100°C.
Properties:
- Bright decorative aluminum paint.
- Adheres well to metals.
- Rigid and resistant paint.
- Outstanding resistance to humid atmosphere.
- Not easily affected by direct contact with light acids.
- Not easily affected by direct contact with alkali solutions.
- Resistant to slight wear and several water rinses.
- The aluminum particles produce sealing and isolation.
Applications:
- Mainly as bright like mirror coat.
- surface paint for piping hot up to 100° C.
- Machinery and ancillary equipment.
- Heat transducers.
- Motor cycles and cars exhaust.
Technical Data:
- Theoretically covered area 1 liter per 15 m2
- Recommended layer thickness 65 mic. wet, 35 microns dry.
- Recommended number of layers 1 or 2
- Flexibility 1 mm (SHEEN),
- Viscosity 1-2 Pa.sec(HAAKE).
- Density 1.0-1.1 gm/cm3
- Hardness 3 Dg (Erickson).
Topcolor Silverstar Bright Aluminum paint 100° C
Synthetic paint for heat up to 100°C.
Contents:
- Special synthetic resin.
- Aluminum super bright.
- Additives.
Shade:
- Aluminum LIKE SILVER.
Sheen:
- Shiny.
Dry to touch:
- Within 30-120 minutes.
Dry between layers:
- Within 8-24 hours, final 16-24 hours.
Application Methods:
- Brushing, roller. Spraying,
Thinning:
- Brushing 5% D-18 thinner
- Spraying 10-15% D-18 at 3-4 atm. pressure.
Topcolor Silverstar Bright Aluminum paint 100° C
Synthetic paint for heat up to 100°C.
Surface Preparation:
- Cleaning mechanically or chemically until obtaining white metal.
- Mechanical: steel brushing.
- Chemical: rust Degreaser 3000; grease Degreaser M
- Sand blast cleaning level 2.5 SA.
Primer:
- No primer needed
Packaging:
- 2.5, 5 liter, 18 liter.
Storage:
- At room temperature in protected area.
Shelf Life:
- 12 months in original packing.
Tool Cleansing:
- Mineral turpentine or D-18 immediately after use.
Safety:
- Not edible, keep away from reach of children.
- Inflammable, keep away from heat
- Proper ventilation is required during application.
- Wear protective goggles, gloves and cloths.
- If hurt tum to physician.
Topcolor Silverstar Bright Aluminum paint 100° C
Synthetic paint for heat up to 100°C.
Warning:
May not be mixed with materials not recommended by us.
Quality Control:
- In our plant laboratories according to specifications.
- ISO 9001-2015
Safety precautions:
- Not eatable, keep from the reach of children.
- Flammable, keep distant from heated areas, fires, flames, and sparks. Prohibit smoking in area.
- Check that there is enough air while applying. In case there is not enough air, uses ventilation according to the ventilation table.
- Wear protective glasses, gloves and suits.
- Avoid direct contact with the paint and thinner from the eyes and skin. In case of contact, immediately wash thoroughly with water.
- In case of an injury immediately get doctors assistance. Read the safety instructions on the labels.
Topcolor Silverstar Bright Aluminum paint 100° C
Synthetic paint for heat up to 100°C.
Warnings:
- Don’t mix with substances and materials that were not recommended by us. Don’t apply if the temperature is under +7°C.
- Don’t apply if the humidity is over .80%
- When applying wit Airless, do not aim it at anybody a direct hit could be fatal at pressure 150 and 300 atm.
- Read thoroughly the technical data of the product listed in this section, confirm that every thing understood completely, for clarification contact our tech. department.
- All information that is listed in this content is a recommendation only and do not apply in of law, the costumer must confirm that this product is compatible with his equipment and The information listed in this section is according to laboratory environment which were tested. At a 25°C room temp and 65% humidity.
- The recommendations listed do not hold any responsibility for this product.
- Theoretical and actual coverage are different concepts, the actual coverage is affected by · required width of the layers, required number of layers, painting conditions and the amount absorbed in the air before touching the surface.
- The information listed in this section is based on experience and accumulating data, which has Denber inc., the right to change the information listed at any time without any note in Paints that have been in stagnation could have their qualities change by up to .20%
Topcolor Silverstar Bright Aluminum paint 100° C
Synthetic paint for heat up to 100°C.
- Visit our sites: www.denber-paints.co.il
- www.denber-colors.co.il
- Varnish for wood. How to choose the right varnish for wood
- Thermal isolation Thermoseal 200 energy saving in green construction
- Crystal epoxy resin for tables
- Fire resistance of houses, hardwood and parquet floors, decks
- Sealing the floor of the balcony, terrace from rain
- Thin floor nano-coverings for industrial refrigerators and freezers
- Epoxy floors – Benefits of epoxy floors
- Swelling paints for steel protection against fire – Fire retardant paint
- As part of the restoration of buildings – concrete restoration at the Yad Kennedy site
- Paint for aircraft Denbergloss Jets
- Complicated sealing based on innovative technologies
- Reconstruction project of a unique house (Israeli house of architect Gaudi); Renovation of condominiums
- The work on the floor covering and restoration of the sports hall has been completed
- Denber has developed an innovative solution for thermal insulation works
- Mold, how to remove mold correctly and how to fight mold
- “Sick” buildings – Antibacterial paints destroys viruses / bacteria – Bacterinoll/ Tutgum Bacterinol
- Denber – floor coating using epoxy and polyurethane – find out what is suitable for you epoxy floor or polyurethane floor
- Epoxy floor coating and epoxy paints