Denbergloss Anti flame 2:1:1. DENBER PAINTS AND COATINGS

Denbergloss Anti flame 2:1:1

Polyurethane paint/lacquer fire retardant

Three component clear/tinted primer and top coat, fire retardant, prevent expansion of the fire and smoke deject.

Tested by the standards institution of Israel-standard 755

Denbergloss Anti flame 2:1:1. www.denber-paints.co.il

Denbergloss Anti flame 2:1:1

Polyurethane paint/lacquer fire retardant

Properties:

Fire protecting coat.
Fast drying, ready for recoating after 4-6 hour.
Tough, scratch resistance.
Good adhesion to metal, concrete, wood.
Can be applied in some layers for thick coat.
Suitable for welding.
Prevent fire expansion and deject smoke.
Washable and repulsive dust & dirt.

Applications:

Metal, wood & concrete fire expansion preventing coat.
Wooden floors, parquets.
Wooden furniture’s.
For immediate treatment in places where works with life fire or welding executed.

Technical Data:

Theoretical spreading rate: 1 liter per 12-15 m 2·
Theoretical coverage: 6-7 m2/liter for 150 mic. thickness layer.
Recommended dry thickness: 75 mic.
Recommended number of layers: min. 2
Mixing rate a:b by volume: 2:1:1
Density: 0.9-1.35 gm/cm 3 (DIN 51575)
Hardness: >3 Dg (Erichsen)
Elasticity: 1 mm (Sheen)
Viscosity: 2-4 Pa.sec (Haake)
Traction resistance: 3.2 N/mm 2 (DIN 53455)
Adherence to steel: 215 kg/cm2
Impact resistance: 1.8 Dg/mm2
Pot life: 4-6 hours at 20°c.

Denbergloss Anti flame 2:1:1

Polyurethane paint/lacquer fire retardant

Contains:

Special polyurethane resins.
Hardeners
Flame retardants
High temperature fillers
Additives

Colors:

Clear, white, black, red oxide, brown, dark green, dark yellow.

Gloss:

Glossy / Silky matte

Touch-drying time:

60 minutes

Repainting Gap Time:

4-6 hours

Curing time:

24 hours

Recommended Application Methods:

Spray, brush, roller.

Denbergloss Anti flame 2:1:1

Polyurethane paint/lacquer fire retardant

Dilution:

Spray gun- 25-35% thinner D-11 pressure 4-5 atm.
Brush & airless- 5-10% D-11, input pressure 5-6 atm. Nozzle – 0.018″ output pressure 120-150 atm.

Surface Preparation:

Non-ferrous metals – cleaned-dry, free of contamination. When exposed to condensation – surface must be swept.
Suitable primer needed in some cases.
Steel – sand blast to Sa-2.5, Swedish standard or sspc s-p 10 USA standard or DIN – 55928 chap. 4 German standard.
Concrete – sand blast till the concrete is perfectly clean & the apertures / holes are open. Also recommended extra cleaning with diluted acid and water high pressure cleaning. (painting allowed 30 days after casting concrete)
Wood – surface must be clean and dry. First coat of Denbergloss anti flame will function as primer. After sanding the dry primer it is ready for recoating.

Instruction For Use:

Surface preparation as recommended.
Open carefully parts a & b and stir separately well.
Pour needed quantity ratio base to hardener 1:1.
Blend well for homogenous mixture and add thinner D-11 as recommended.
Blend again and spray first coat, after 4-6 hours minimum sand a little and spray second layer and etc.

Ventilation:

For 1 liter of mixed paint: 1 . In order to reach 10% of LEL = 65m 3

In order to reach the TLV = 990m 3

For 1 liter of thinner D-11 1. In order to reach 10 % of LEL = l 84m 3

In order to reach the TLV = 2125m 3

Denbergloss Anti flame 2:1:1

Polyurethane paint/lacquer fire retardant

Kit Description:

5 liter part A + 2.5 liter part B + 2.5 liter part C
2.5 liter part A + 1.25 liter part B + 1.25 liter part C

Storage:

In cool and shaded room in room temp. with appropriate ventilation.
Keep lids hermetic closed.

Shelf Life:

12 months in original sealed package.

Clean Up:

Clean with thinner D-11 immediately after complete painting.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Denbergloss Anti flame 2:1:1