Bernish Anti flame wood fire protection

Bernish Anti flame wood fire protection

Synthetic tinted clear/tinted wood stain fire retardant.

Synthetic tinted clear wood stain top coat lacquer, glossy/silky/matte, for coating wooden elements. Bernish antiflame is flame retardant and smoke depressive, prevents mildew, rotting, fungus and contains fungicides that repels harmful wood insects.

With the IFR30 as primer – isolate the effects of burning from the heat when fire. Diluted with turpentine or synthetic thinner. 

Pass the Israeli Standards Institute standard 755 rank 5. Test no.  8111202204

Bernish Anti flame wood fire protection. www.denber-paints.co.il

Bernish Anti flame wood fire protection. www.denber-paints.co.il

Bernish Anti flame wood fire protection

Synthetic tinted clear/tinted wood stain fire retardant.

Properties:

  • Decorative fire prevent clear/tinted top layer lacquer coat.
  • A quick drying, ready to repaint every 4-6 hours depending on the environment temperature.
  • A great adhesion to the wood.
  • Easily implemented by spreading with spray gun, airless, roller or Flexible and not cracking.
  • Prevents the spread and development of flame.
  • Emit’s gas that shutdown flame.
  • Depressing smoke isolated the spread of heat to the infrastructure.
  • Dilution with turpentine, can be applied as a paint on glass wool
  • Isolates the wood from rain and humidity.
  • Can be applied in layers of 40-45 mic.

Applications:

  • Coating wooden floors, walls and furniture to prevent flammability in event of fire.
  • Coating garden furniture’s.
  • Coating wooden roof parts.
  • Coating wooden fences.
  • To spray on textile/PVC tents, curtains and carpets after IFR-30 impregnation to hold it in against rains etc..

Bernish Anti flame wood fire protection

Synthetic tinted clear/tinted wood stain fire retardant.

Technical data:.

  • Coverage – 1 liter for 8-10 sqm.
  • Effective coat – 1 liter for 3-4 sqm.
  • Recommended wet film thickness – 250 mic.
  • Every layer thickness – 120 mic.
  • Flexibility – 1 mm (sheen)
  • Density – 1.3- 1.45 gm\cm3
  • Viscosity – 0.2-0.6 (HAAKE)
  • Hardness– 3 Dg (Erickson)
  • Burnout-120 microns-760 cycles (Gardner) ASTM
  • Number of layers – 2-3

Contains:

  • Special
  • .Fillers and pigments.
  • Special flex sizing
  • Solvents and additives.
  • Fire retardants.

Shades:

  • Clear and all natural wood stains.

Bernish Anti flame wood fire protection

Synthetic tinted clear/tinted wood stain fire retardant.

Gloss:

  • Mate/gloss/silk.

Drying time:

  • For contact – 2-4 hours.
  • Between layers: 8 hours. Final: 24 hours.

Application methods:

  • Brushing, spraying or roller.

Dilution:

  • White spirit or mineral turpentine.
  • Brush/roller-5-10%
  • Spraying –  15 – 20%,

Surface preparation:

  • Clean surface from dust, fats, dirt and loose paint..
  • Coat layers until getting 250 mic. Wet thickness.

 Primary paint:

  • IFR-30

Bernish Anti flame wood fire protection

Synthetic tinted clear/tinted wood stain fire retardant.

Packaging:

  • 1 liter, 5 liter, 5 liters, 18 liter, 200 liters.

Storage:

  • In a cool and shaded room with appropriate ventilation..
  • Keep lid hermetic sealed.

Shelf life:

  • 12 months in the original packaging.

Cleaning tools:

  • Mineral turpentine or thinner D- 18 at the end of painting.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Bernish Anti flame wood fire protection

Synthetic tinted clear/tinted wood stain fire retardant.