Denbergloss Acrylic topcoat Polyurethane high quality UV durable,

Denbergloss Acrylic topcoat

Polyurethane paint uv resist

Denbergloss Acrylic topcoat. www.denber-paints.co.il

Polyurethane high quality top paint UV durable and scratch resist

POLYURETHANE TWO COMPONENT COAT, GOOD ABRASION RESISTANCE

* FAST DRYING, TOP COAT, HIGH QUALITY PAINT, UV DURABLE

Denbergloss Acrylic topcoat

Polyurethane paint uv resist

Properties:

Fast drying, ready for recoating after 4-6 hours.
Tough, scratch resistant.
Good adhesion to metal, concrete, wood and epoxy primer/mid. coat.
Can be applied in some layers for thick coat.
Suitable for walking and car parking concrete floors.
Washable and repulsive dust & dirt.
UV protection coat.
Scratch preventing coat.

Applications:

Metal, wood & concrete top coat for interior and exterior areas.
Bridges, tunnels, buildings, metal and concrete elements.
Wooden floors, parquets, furniture’s.
Exterior metal, concrete and wooden walls.
Metal buildings and construction top coat.
Wagons, tractors, trucks, agriculture vehicles etc.
Car parking areas floor coating.

Technical Data:

Theoretical spreading rate: 1 liter per 12-15 m ²
Theoretical coverage: 6-7 m2/liter for 150 thickness wet layer, 100 mics. dry film.
Min. recommended dry thickness: 75 mics.
Recommended number of layers: 1- 2
Mixing rate, a: b by volume: 2:1
Density: 9-1.35 gm/cm ³(DIN 51575)
Hardness: >3 Dg (Erichsen)
Elasticity: 1 mm (Sheen)
Viscosity: 2-4 sec (Haake)
Traction resistance: 2 N/mm ² (DIN 53455)
Adherence to steel: 215 kg/cm²
Impact resistance: 1.8 Dg/mm²
Pot life: 4-6 hours at 20°c.

Denbergloss Acrylic topcoat

Polyurethane paint uv resist

Contains:

Special polyurethane resin.
Isocyanate hardeners.
Pigments.
Fillers
Additives

Colors:

Clear, All colors according cat. RAL or any other.

Gloss:

Glossy, Silky, matte

Touch-drying time:

60 minutes

Repainting Gap Time:

4-6 hours

Curing time:

24 hours

Recommended Application Methods:

Spray, brush, roller.

Dilution:

Spray gun- 25-35% thinner D-11 pressure 4-5 atm.
Brush & airless- 5-10% D-11, input pressure 5-6 Nozzle – 0.018″ output pressure 120-150 atm.

Denbergloss Acrylic topcoat

Polyurethane paint uv resist

Surface Preparation:

Non-ferrous metals – cleaned-dry, free of When exposed to condensation – surface must be swept.
Suitable primer needed as MIL-PRF- 23377 or MIL-P-53022.
Steel – sand blast to Sa-2.5, Swedish standard or sspc s-p 10 USA standard or DIN – 55928 4 German standard.
Suitable primer needed as– Epoxyden primer antirust rust converter.
Concrete – sand blast till the concrete is perfectly clean & the apertures / holes are Also recommended extra cleaning with diluted acid and water high pressure cleaning. (painting allowed 30 days after casting concrete)

Suitable primer needed as Epoxyden floor primer clear.

Wood – surface must be clean, sanded and First coat of isolation will function as primer. After sanding the dry primer, it is ready for recoating.

Instruction for use:

Surface preparation as recommended.
Open carefully parts a & b and stir separately well.
Pour needed quantity ratio base to hardener 2:1.
Blend well for homogeneous mixture and add thinner D-11 as recommended.
Blend again and spray first coat, after 4-6 hours spray second layer and so on.
If second layer sprayed after 48 hours or more, first layer must be sanded gently for perfect adhesion.

Ventilation:

For 1 liter of mixed paint: 1 . In order to reach 10% of LEL = 65m 3

In order to reach the TLV = 990m 3

For 1 liter of thinner D-11 In order to reach 10 % of LEL =184m 3

In order to reach the TLV = 2125m 3

Denbergloss Acrylic topcoat

Polyurethane paint uv resist

Kit Description:

3.4-liter part A + 1.6-liter part B
5-liter part A + 2.5-liter part B
10-liter part A + 5-liter part B

Storage:

In cool and shaded room in room temp. with appropriate ventilation.
Keep lids hermetic closed.

Shelf Life:

12 months in original sealed pack.

Clean Up:

Clean with thinner D-11 immediately after complete painting.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Denbergloss Acrylic topcoat