Denbergloss Primer White
Epoxy primer for universal surfaces.
Primer UNIVERSAL to Denbergloss paints on floors and walls and any metal or wood surface.
The epoxy polyamide primer is especially universal uses for concrete floors/walls, metals and wood, plastics etc.. with a high quantity of solids to fill and seal all the concrete pores and very low viscosity that enables it to penetrate deep into the concrete and build “roots” to hold the floor coat/paint and prevent it from pool off and disconnection, strengthening the infrastructure of the concrete, produces an even and smooth sealing film for coating additional layers which covers the floor/walls with the wanted shade and thickness. Contains adhesion promoters gives excellent adhesion to wood, metals, plastics.
Denbergloss Primer White
Epoxy primer for universal surfaces.
Properties:
- Penetrates deep into the concrete (small molecular structure) and builds strong “roots”.
- Creates a sealed surface for coating.
- Prevents emitting air (that makes bubbles) from pores while coating the top self-leveling coating
- Enables recoating.
- Strengthen the concrete and fill the pores.
- Durable in acid and base solutions and in salt and humid environment.
- Excellent adhesion to infrastructure.
- Bridging coat between old epoxy paint and a new top layer.
- Ready for recoating or top coating after 3-4 hours.
- High coverage area.
- Creates an impermeable ability that extends its service period,
- Prevents stains from organic materials and accumulating dirt.
- Durable in fuels and oils and jet fuels.
Applications:
- Foundational primer layer coating for concrete, stone, gypsum, wood, metals, plastics.
Technical specifications:
- Theoretical surface cover: 10 sqm. for 1 liter.
- Practical surface cover ratio: 3-8 sqm. for 1 liter(depends on the quality for the concrete)
- Flexibility: 1 mm (sheen). (DIN 53457 N\mm² 720%)
- Density: 1-1.2 gm\cm³.(DIN 51575)
- Viscosity: 1-2 Pa.sec (HAAKE)
- Hardness: >3 dg (Ericson).(60gr. Lose –DIN53153)
- Pot life = Life span after mixture: 8 hours at 20°C.
- Recommended layer thickness: 250 microns
- of recommended layers: 1. For high absorbency concrete: 2.
- Base-Solidity ratio: 1:1
- Erosion endurance: 2800 cycle (BYK Gardener) ASTM
- Flash point: 38°C
- Waiting period before painting:
Denbergloss Primer White
Epoxy primer for universal surfaces.
Temperature | Time |
15°C | 30 min. |
20°C | 15 min. |
25°C | 10 min. |
Contains:
- Epoxy resin.
- Polyamide hardener
- Pigments and fillers.
- Penetration and flexibility components.
- Additives.
- Adhesion promoters.
Colors:
- White.
Gloss:
- Matte.
Touch dry time:
- 2-4 hours in summer.
Drying time between layering:
Temp. | 5°C | 10°C | 15°C | 20°C | 30°C | 40°C |
First curing | 16h. | 8h. | 5h. | 4h.. | 3h. | 2h. |
Final curing | None | 15 days | 10 days | 7 days | 3 days | 2 days |
Denbergloss Primer White
Epoxy primer for universal surfaces.
Application methods:
- Spray, brush, roll.
Thinning:
- No Thinning necessary.
Surface preparations:
- Mechanically grind with a diamond grinder with vacuum until a smooth and clean surface is created. Or sand blasting.
- Scrap loose and crumbled layers from old concrete.
- Open and enlarge spreading cracks and any cracks with a diamond disk and vacuum thoroughly.
- Fill dents with grout Epoxyden and all cracks with Polyflex 225A
Instructions for use:
- Prepare the surface as instructed above.
- Make sure that the concrete is absolutely dry.
- Carefully open A and B parts of the Epoxyden floor Primer.
- Pour both pats into a container and simultaneously stir until you get a homogeneous mixture.
- Wait according to the wait period table.
- Pour the mixture on the floor and spread it with a wiper\brush or a rolling device until an even surface is formed. Or spread on walls with roller or spraying.
Pot life – Life span of mixture accord to temp.:
- For 5 liter A +B mixture:
Temp. | 15°C | 20 °C | 25°C | 30°C | 35°C |
Duration | 10 hours | 8 hours | 7 hours | 6 hours | 4 hours |
Denbergloss Primer White
Epoxy primer for universal surfaces.
Ventilation:
- The amount of air required for 1-liter paint mixture of A+B:
- Enable to reach 10% of M³ 65=LEL
- Enable to reach the M³ 990 = TLV
- The amount of air required for 1 liter D-4\100 thinner:
- Enable to reach 10% of M³ 182= LEL
- Enable to reach M³ 2125 = TLV
Packaging:
- 2.5+2.5= liters, 5+5=10 liters, 18+18=36 liters, 200+200=400 lit.
Storage:
- Store in a room temperature in shaded area with proper ventilation.
- Keep lids tightly closed.
Shelf life span:
- 24 months in its original packaging.
Equipment cleansing:
- Uses D-4\100 immediately after finishing painting.
Quality control:
- In factory laboratories according to specifications.
- COA and COC certificate.
- ISO 9001-2015
Denbergloss Primer White
Epoxy primer for universal surfaces.
- For more information about Denber Paints and Denber Projects, please contact us by phone and/or to the company’s websites:
- company profile English also
- For more details please refer to the Denber website also
- For our Facebook page click here also
- To the Facebook page of the CEO of Denber also
- For more projects click here also
- To the article: Sealer for stone and concrete and marble also
- To the article: Thermal insulation in nanotechnology also
- article: Thermal insulation Thermosil 200 energy saving in green construction also
- Related article: Thermal insulation, floor coating also
- To the article: Thermal insulation in nanotechnology company Denber also
- Fire resistance of houses, hardwood and parquet floors, decks also
- Swelling paints for steel protection against fire – Fire retardant paint also
- Epoxy floor coating in casting and painting also
- Crystal epoxy resin for tables also
- To the article Sealing also
- The complete article on the sealing materials for roofs and walls also
- Sealing the floor of the balcony, terrace from rain also
- Mold, how to remove mold correctly and how to fight mold also
- “Sick” buildings – Antibacterial paints Bacterinoll/ Tutgum Bacterinol also
- Paint for aircraft Denbergloss Jets also
- Asphaltflex execution specification – Denber Paints also
- Denbergloss grainy car paint also
- Denbergloss Clear also
- Varnish for wood. How to choose the right varnish for wood also
- Crystal epoxy for tables from Denber also
- Paint for swimming pools, epoxy Epoxyden Dengal, performance specification also
- Color specification of quadrant helmets also
- For a free consultation, call Denber – Dr. Blen Evgenia – 050-3551549 / 050-3551551 also
- Need advice? Contact us by email: Denber@bezeqint.net or contact us at 08-9960794