Epoxyden Topcoat HD paint

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint

Epoxyden Top Coat Tinted high build heavy duty. Two component for metal, aluminum, concrete etc.   

A hard two component decorative industrial use paint, for spraying or spreading, for metal elements, aluminum and its alloys, concrete and asbestos, industrial machines, production areas walls and floors and etc., Produced in compliance with U.S.  standards. Durable in harsh and extreme environments. Has high erosion and chemical endurance. Has a smooth and washable surface that is durable against light loads. For painting on Epoxyden primer, creates a protective coat with high adhesion to the primer. Suitable for painting aviation and space parts with surface preparation according the mil-spec demands and the American standard ASTM. 

Epoxyden Topcoat HD paint. www.denber-paints.co.il

Epoxyden Topcoat HD paint. www.denber-paints.co.il

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint

Properties:

  • Top coat layer with mechanical strength and high adhesion to the epoxy primer.
  • White and in any color, protects the painted surface in extreme conditions.
  • Perfect top coat for steel, aviation aluminum and it alloys.
  • Protects from oxidation or rust in iron metals.
  • Alkali and acid durable according to the table below and in extreme humidity.
  • Heavy Duty
  • Easy to paint and repaint when required. Dries quickly.
  • Durable against industrial polluted water.
  • Durable against most fuels and oils and jet fuel.
  • Durable against cleansing and other pungent chemicals.
  • Durable against scratches and hits.
  • Appropriate for industrial walls and floors that light equipment and carts move on it.
  • Covers the painted objects with an even and smooth coat that has no stitches, colorful and decorative that come in various tints.
  • Easy to clean and leaves a clean floor and walls after an ordinary wash.
  • High mechanical strength and excellent durability against light load erosion
  • Durable in dry heats of up to 200°C on short periods of time and up to 150°C for long periods of time.
  • Easily repairable at very low costs.
  • Ready for repainting in the same day after 12 hours.
  • High coverage area.
  • High electrical isolation.

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint

Applications:

  • For internal uses without exposure to direct sun.
  • As top coat for metal parts in industry and aviation parts in aviation and space production.
  • For upgrading durability to chemicals and chemical or salty corrosive environment.
  • For painting concrete, asbestos and stones.
  • For industrial machinery and products coating.
  • For walls and floors in industries that don’t have forklift movement,
  • Floors in private car parking areas, garages and warehouses.
  • For floors for pedestrian in galleries, stores, clubs and etc.
  • For walls and floors in hi-tech buildings, medicine and food industries that need a high sanitation standard.

Technical specifications:

  • Coverage – 1 liter per 8-10 sqm. in layer of 50 mic. dry minimum.
  • Flexibility: film 120 microns – 1 mm (SHEEN).
  • Density in”: 1.2-1.45 gm\cm³ (DIN 51575) part B – 0.85-0.95 gm\cm³ (ASTM D-1475)
  • Viscosity: Part A 70 Krebs, part B – 25 Krebs/
  • Hardness: > 10 Dg  (ERICHSEN) (over 60 DIN 53153)
  • Flash point: part A 27°C, Hardener: at 166°C (isn’t flammable, doesn’t contain solvents (DIN 53213, 53213)
  • Solids % – part A in weight 68% . part B 52% in volume (ASTM D-2369)
  • Erosion endurance: 2560 cycle (BYK Gardener)
  • Recommended thickness of layer – 125 mics. wet, minimum 50 mic. dry.
  • Number of recommended coats – 1-2
  • Hard dry time – 4 hours.
  • Pot life – 4 hours.
  • Volume mixture ratio: 2.5:1.
  • Wait time before painting – 10 minutes.

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint

Contains:

  • A mixture of high-quality epoxy resins.
  • thinners
  • Fillers
  • Additives.
  • Hardener

Colors:

  • White standard.
  • Clear and any from RAL catalog., 595 fed. St., BS and BAM catalog.

Gloss:

  • Silk/shiny
  • Matte 10-30% (ASTM D 523)

Touch-dry time:

  • 12 minutes at 25°C for 100-micron wet layer.
  • If dust creates as the fast drying while spraying, add retarder to the paint, low the pressure and add thinner.

Waiting period between layers:

  • 12 hours. Final: 24 hours, final hardening: 3- 7 days. (changes accordingly to the temperature)

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint

Application methods:

  • Roller. spray, brush.

Thinning:

  • Thinner 4/100 as MIL-T-81771 Type II
  • 10-25% as needed for brush or roller. If orange effect appears can add thinner to 35%
  • Spray – 10-25%
  • Airless – 0-5%.

Surface preparations:

  • It is required to apply on the Epoxyden primer-based surface only if it is completely clean and dry.
  • Old paint – sand well with glass paper and clean with air pressure and drug socked with thinner.
  • Aviation aluminum and it’s alloys – burn and passivation according MIL-C-5541 MIL-C-81706
  • Big elements – paint removing and wash, sanding with polish machines or sand blast or plastic balls blast. Wash and dry.

Primer:

  • Steel – Epoxyden primer anticorrosive or HB19 or with Rust converter
  • Aluminum – Epoxyden strontium chromate

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint

Instructions:

  • Make sure that the base primer layer is dry, clean – dirt, dust and grease free.
  • Open carefully ‘A’ +’B’ parts of the paint and pour at the ratio 2.5:1 in the required amount,
  • Floors: stir well and immediately pour on the edge surface floor. With an epoxy roller, spread the substance evenly on the surface. It is recommended not have any equipment movement on the surface for at least 7 days.
  • Metal objects: stir well and fill to spray gun or airless, spray the substance evenly on the surface for 50 mics. dry min. after 4 hr. a second coat can be apply.

Life span after mixture (POT LIFE) according to the temperature:

5 liters of ‘A’ +’B’ mixture
15°C 10 hours
20°C 8.0 hours
25°C 6.0 hours
30°C 5.0 hours
35°C 4.0 hours

Ventilation:

  • Quantity air needed for 1-liter mixture Epoxyden primer white:
  • To get 10% LEL=65 M3
  • To get the TLV = 990 M3

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint

Packaging:

  • 3.4+1.6=5 liter.

Storage:

  • Store in a shaded place, at a temperature of between 15°C-32°C with proper ventilation.
  • Keep lids tightly closed.

Shelf life span:

  • 12 months in its original package.

Equipment cleansing:

  • Use D-4\100 thinner immediately after painting.

Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

Epoxyden Topcoat HD paint

Heavy duty top coat epoxy paint