EPOXYDEN H.B.19 Antirust Primer/top coat paint

EPOXYDEN H.B.19 Antirust Primer/top coat paint

Primer epoxy metal & concrete (2: 1 125 mic. Per layer)

EPOXYDEN H.B.19 Antirust Primer/top coat paint. www.denber-paints.co.il

EPOXYDEN H.B.19 Antirust Primer/top coat paint. www.denber-paints.co.il

High build multi-layer epoxy coat to prevent rust on ferrous metals and primer for concrete surfaces.

Properties:

  • Flexible, heavy duty, high build.
  • Fast drying, ready for re coating after 6 hours.
  • Tough, scratch resistance, appropriate for painting constructions and cement/gypsum/wooden boards, and for any infrastructure.
  • Good adhesion to metal, concrete, wood.
  • Can be applied in some layers for thick coat.
  • For steel – preventing rust (produced in some shads).
  • Wood – decorative in transparent and Varnish  tints, Also in impervious shades.
  • Concrete – isolation primer filler and decorative top coat.
  • Resistant to salt and wet environment and durable in oils, fuels and solvents.
  • Washable and dust & dirt repulsive.

EPOXYDEN H.B.19 Antirust Primer/top coat paint

Primer epoxy metal & concrete (2: 1 125 mic. Per layer)

Applications:

  • Painting metal, wood & concrete as a primer coat before coating with top coat.
  • Primer for ferrous metals and aluminum to prevent rust and oxidation.
  • For immediate treatment in places where welding works executed to prevent .rust development.

Technical Data:

  • Theoretical spreading rate: 1 liter per 15 m 2
  • Consumption: 6-7 m 2/liter for 150 mic.
  • Recommended dry film thickness: 125 mic.
  • Recommended number of layers: 2-3
  • Density: 5-1.65 gm/cm3
  • Hardness: >3 Dg (Erichsen)
  • Elasticity: 1 mm (Sheen)
  • Viscosity: 2-4 sec (Haake)
  • Mixing ratio A:B – 2:1
  • Flash point: 38 °C
  • Pot life: 6 hr.
  • Adhesion to metal: 210 cm 2

Contains:

  • Epoxy resins.
  • Flexibility agents.
  • Additives.
  • Pigments and fillers.

Colors:

  • Black, red oxide, brown, dark green, dark yellow, grey and more …

Gloss:

  • matte

EPOXYDEN H.B.19 Antirust Primer/top coat paint

Primer epoxy metal & concrete (2: 1 125 mic. Per layer)

Touch-drying time:

  • 60 minutes (avoid over spray).

Repainting Gap Time:

  • 16 hours, final- 24 hr.

Recommended application methods:

  • Spray, brush, roller.

Dilution:

  • Spray gun – 25-35% thinner D-4/100 pressure 4-5 atm.
  • Airless –  5-10% thinner D-4/100,pressure  6-7 nozzle- 0.021″/0.023″
  • Roller/brush – 5% thinner D-4/100.

Surface Preparation:

  • Mechanical or chemical cleaning until a white metal appear, Aluminum- Antarox 4+ passivator 1722
  • Mechanical: steel brushes ST-2.5.
  • Chemical: rust -“rust remover 3000”, grease/oils -“Degreazer M”.
  • Sand blast cleaning: level SA 2.5.

Instruction for use:

  • Surface preparation as recommended.
  • Open carefully parts a & b and stir separately well.
  • Pour needed quantity ratio base to hardener 2:1.
  • Mix well for homogeneous mixture and add thinner D-11 as recommended.
  • Mix again and spray first coat, after 4-6 hours minimum sand a little and spray second layer and etc.

EPOXYDEN H.B.19 Antirust Primer/top coat paint

Primer epoxy metal & concrete (2: 1 125 mic. Per layer)

Kit Description:

  • 3.4 liter part A + 1.6 liter part B
  • 13 liter part A + 5 liter part B

Storage:

  • Appropriate shaded room tem. with proper ventilation.
  • Keep lids tightly closed.

Shelf Life:

  • 12 month in original sealed packed.

Tools cleaning:

  • Clean with thinner D-4/100 immediately after complete painting.

  Quality control:

  • In factory laboratories according to specifications.
  • COA and COC certificate.
  • ISO 9001-2015

Safety precautions:

  • Inedible, keep away from the reach of children.
  • Flammable – keep distant from heated areas, fires, flames, and sparks, Prohibit smoking in working area.
  • While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
  • Wear protective glasses, gloves and suits.
  • Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
  • In case of an injury immediately get doctors assistance.
  • Read the safety instructions on the labels.
  • See M.S.D.S

EPOXYDEN H.B.19 Antirust Primer/top coat paint

Primer epoxy metal & concrete (2: 1 125 mic. Per layer)