Epoxyden Coaltar EPOXY НВ. Denber Paints and coatings

Epoxyden Coaltar EPOXY НВ

Primer/top coat paint (2.5: 1 2OOmic. 80% solids)

Special multi-layer epoxy coat prevents rust on ferrous metals and primer for concrete surfaces. Protects from chemicals and provides perfect water insulation.

Epoxyden Coaltar EPOXY НВ. www.denber-paints.co.il

Properties:

Flexible, heavy duty, perfect isolation, shock resist.
Fast drying, recoat able.
Tough, scratch resistance,
Appropriate for painting constructions and cement/gypsum/wooden boards, and for any infrastructure.
Good adhesion to metal, concrete, wood.
Can be applied in some layers for thick coat.
Steel-preventing rust.
Concrete isolation primer filler and decorative top coat.
Resistant to salt and wet environment and durable in oils, fuels and solvents.
Washable and repulsive dust & dirt.
Suitable for isolation underground structures.

Applications:

Painting metal, wood & concrete for priming, rust preventing and decoration.
Primer for ferrous metals and aluminum.
For coating water and chemicals reservoirs and pipes, sellers and exterior underground walls, sewage concrete and metal pipes.

Epoxyden Coaltar EPOXY НВ

Primer/top coat paint (2.5: 1 2OOmic. 80% solids)

Technical Data:

Theoretical spreading rate: 1 liter per 10 m ²
Recommended dry thickness: 200 mic.
Recommended number of layers: 2
Density: 2-1.3 gm/cm ³·
Hardness: >3 Dg (Erichsen)
Elasticity: 1 mm (Sheen)
Viscosity: 40-60 Poises (Brookfield)
Mixing ratio A:B – 2.5:1
Flash point: 38 °c
Pot life: 8 hr.
Adhesion to metal: 210 kg/cm ²

Contains:

Special Epoxy resins.
Flexibility materials.
Additives.
Pigments and fillers.
Coal tar.

Colors:

Black, red oxide, brown, dark green, dark yellow, grey and white.

Gloss:

Mate – silk.

Touch-drying time:

60 minutes for white (avoid over spray).

Repainting Gap Time:

16 hours, final dry time – Final strength – 7 days.

Epoxyden Coaltar EPOXY НВ

Primer/top coat paint (2.5: 1 2OOmic. 80% solids)

Recommended Application Methods:

Spray, brush, roller.

Dilution:

Spray gun- 25-30% thinner D-4/100, pressure 4-5 atm.
Airless – 0-5% thinner D-4/100, pressure 6 Nozzle – 0.026″
Roller/brush- 5-10% D-4/100.

Surface Preparation:

Mechanical or chemical cleaning until a white metal appears, Aluminum- Antarox 4+ passivator 1722
Mechanical: steel brushes ST-2.5.
Chemical: rust -“rust remover 3000”, grease -“Degreazer M”.
Sand blasting cleaning: level SA 5.
Concrete – burn with salt acid and flash with water in high pressure

Instruction for use:

Surface preparation as recommended.
Open carefully parts a & b and stir separately well.
Pour needed quantity ratio base to hardener 2.5: 1.
Blend well for homogeneous mixture and add thinner D-4/100 as recommended.
Blend again and spray first coat, after 4-6 hours minimum sand a little and spray second layer and etc.

Kit Description:

3.6-liter part A + 1.4-liter part B = 5 liter
13-liter part A + 5-liter part B = 18 liter

Storage:

Appropriate shaded room with proper ventilation.
Keep lids tightly closed.

Epoxyden Coaltar EPOXY НВ

Primer/top coat paint (2.5: 1 2OOmic. 80% solids)

Shelf Life:

12 months in original sealed pack.

Clean Up:

Clean with thinner D-4/100 immediately after complete use.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Epoxyden Coaltar EPOXY НВ