Denbergloss Ship Antislip Deck coat. Denber paints and coatings

Denbergloss Ship Antislip Deck coat

Deck anti slip thin coat with Teflon aggregates

Polyurethane Top coat deck floor paint clear/tinted anti-slip.

Aliphatic two component Polyurethane top gentle textured decorative paint/lacquer for deck floors, prevents slipping. Clear or multi-colored, glossy, silk or matte. Durable in sea environment. Has high mechanical and chemical erosion endurance in extremely tough climate conditions. Suitable for applying a number of layers. Doesn’t fade even at extensive time exposures under the sun.

Denbergloss Ship Antislip Deck coat. www.denber-paints.co.il

Polyurethane Top coat deck floor paint clear/tinted anti-slip. www.denber-paints.co.il

Denbergloss Ship Antislip Deck coat

Deck anti slip thin coat with Teflon aggregates

Properties:

Prevents slipping on wet floors.
Decorative gentle textured finish.
A tough finish.
Easy to wash.
High hardness.
Endures scratches and mechanical hits.
Endures UV rays, chemicals and solvents.
Heat and cold endurance.
Very high gloss or other by demand, durable for many years.
Dries quickly.
Flexible for bending and tough for erosion.
Very good adhesion to surface.
Easy to apply.
Durable in any external conditions and freezing.
Contains no Cadmium, no lead, contains no chromates.

Applications:

For top floor coating boats and ships wet floors.
For coating epoxy coated surfaces against slippery.
and For external and internal us in marine vehicles.

Denbergloss Ship Antislip Deck coat

Deck anti slip thin coat with Teflon aggregates

Technical specifications:

Part A – easily mixed by hand and after 5 minutes a smooth form will appear.
Part B – clear
Storage durability – 24 hr. in 57 ^OC with no sagging.
Theoretical coverage: 1 liter for 8
Actual coverage for the required thickness: 5 sm. per 1 liter.
Coverage ability: > 0.95 for all shades, yellow > 0.9 in 58 mics. layer.
Recommended dry layer thickness: 125 microns.
Recommended wet layer thickness: 200 mic.
and Recommended number of layers: 2
Base to hardener mixture ratio: 2:1
Viscosity: 1-2 sec (HAAKE).
Density: 1.1-1.2 gm/cm3
Hardness: >10 Dg (ERICHSEN)
Flexibility: 100-micron film- 1 mm (SHEEN).
Erosion 120 mic. film: 3600 cycles (BYK Gardener)
Pot life – Work time period since mixing base and hardener: < 6 hours.
Percentage of solids: 66.6 %
Testing the lacquer: 1000 hours in Q-Panel with a UVA-340 light bulb in cycle of 8 hours light at a temperature of 60°C and 4 hours at a temperature of 50 °C, the lacquer successfully passed the test with a minimal color difference without any damaged caused to the The testing was conducted in the substance laboratory of the military defense department enclosed to this section.
Humidity cabinet – 30 days, 100% humidity in 49^OC with no adhesion lose.
Salt spray – 2000 hr.

Denbergloss Ship Antislip Deck coat

Deck anti slip thin coat with Teflon aggregates

Contains:

Acrylic polyurethane resin (high OH groups).
Durable pigments.
Solvents,
Additives.
Isocyanates that endure UV (special aliphatic mixture)

Colors:

Clear, white, black and all RAL colors, Fed st. 595.

Gloss:

Shiny, matte or silk.

Touch-dryness:

30-60 minutes.

Between coats:

6-8 hour. Final 12-16 hours.

Application methods:

Spray top canister nozzle 1.2, roller or brush.

Denbergloss Ship Antislip Deck coat

Deck anti slip thin coat with Teflon aggregates

Thinning:

Spray: 30-35% of D-11 thinner at a pressure of 3-4 In the summer it is recommended to add retarder.
When brushing or rolling use up to 20% thinner in cases where smear stripes are formed.

Surface preparations:

The paint on concrete, epoxy or stone must be totally spotless of any dirt, dust or

As a prime layer use Epoxyden floor primer, if chemical and heavy-load endurance is required use heavy duty Epoxyden floor or heavy duty Polyflex 275 or 225.

Packaging: