Denbersilver 005 perfect conductive paint

Denbersilver 005 perfect conductive paint – pure silver

One component unique paint on the basis of a conductive polyurethane.

Denbersilver 005 perfect conductive paint – pure silver, www.denber-paints.co.il

High quality conductive paint, with a high viscosity as paint or jell for print silk, very strong and durable with a unique molecular structure. Electrical resistance is close to zero and very high conductivity power. Suitable for electronic equipment, plastic, electrical cables, etc. Mainly troubleshooter shielding problems and deliver the static electricity to the ground.

Denbersilver 005 perfect conductive paint – pure silver

One component unique paint on the basis of a conductive polyurethane.

Properties:

Excellent adhesion to plastic, PVC , and most
Durable in exterior conditions.
Beautiful metallic shade.
UV resistant.
High flexibility.
High hardness, scratches durability.
Minimal resistance to electricity, very good conductivity even in low electrical currents.
A single component, easy-to-use.
Durable in high currents as lightning.
Can be used in printing silk.

Applications:

Painting interior and exterior plastic enclosures of various types of electrical and /or electronic equipment.
Grounding sensitive electronic equipment.
Grounding lightning or electrical strikes.
Electrical shielding for power cables and RF frequency.
Printing on electronic printed circuit.
Level marking in Control systems and electronic checking points to run commands and in medical equipment’s.
For plastic/nylon/polypropylene canisters level sensors,

Denbersilver 005 perfect conductive paint – pure silver

One component unique paint on the basis of a conductive polyurethane.

Technical data::

Theoretical coverage – 1 liter to 5 sqm. (200 microns wet layer).
Flexibility – 1 mm (sheen).
Density – 1.65-1.68 gm/cm3
- Viscosity – 2-3 Sec (Haake)
Hardness-3 Dg (Erichsen)
Layer thickness is 120- 200 microns wet.
Amount of silver and conductive materials: 45-55%
The amount of solid – 75%
Adhesion –5B (ASTM D-3359-78)
Resistance- 10 cm long and width 1 cm thickness 100 microns dry- 0.6 ohm MAX. for 1 layer (the layer should be flat and homogeneous)
Recommended number of layers – 1 (if one is not enough as resistance higher , apply second layer, there will be improvement in resistance)

Contains:

Polyurethane resin soluble in water.
Melanim, silver, fillers.
Special flexibility materials
Additives .

Denbersilver 005 perfect conductive paint – pure silver

One component unique paint on the basis of a conductive polyurethane.

Colors:

Metallic silver and gold.

Gloss:

Silky

Drying:

Touch – 1-2 hours (gel for print-for 10 minutes)
Final – 24 hours (gel for print-final 30- 45 minutes)

Application methods:

Painting –brush, roller, spraying.
Gel for print silk- spreading of the ruler

Dilution:

With water for painting and without dilution of the printing gel

Surface preparation::

Must be cleaned from dust, fat, dirt and loose paint..
Can be wiped with a clean cloth with alcohol to ensure a clean surface from grease.
If surface dry from sun, sand it well and clean from dust. .

Denbersilver 005 perfect conductive paint – pure silver

One component unique paint on the basis of a conductive polyurethane.

Primer paint::

Usually don’t needed, if no adhesion to infrastructure should consult the factory for primer that fits or special recommended preparation.

Package:

5 kg, 1 kg, 4 kg.

Storage::

In a cool, shady room with appropriate ventilation.
Keep lid tightly close.

Shelf life:

12 months in the original packaging.

Tools cleaning:

Soap and water immediately after finish painting.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Denbersilver 005 perfect conductive paint – pure silver