Dururethane 120 glossy polyurethane furniture lacquer. Denber

Dururethane 120 glossy polyurethane furniture lacquer

Lacquer pu with 50% hardener not yellowing

Dururethane 120 glossy polyurethane furniture lacquer. Professional high concentrated and high gloss wooden furniture glaze coat. UV resist.

Dururethane 120 glossy polyurethane furniture lacquer. www.denber-paints.co.il

For parquet floors and quality furniture.

For coating quality furniture and or parquet floors from natural wood, reveals a glazing look that emphasizes its beauty, texture and the natural engravings of the wood. Bolds its color and reveals a wet and rich look.

Properties:

High erosion endurance
Endures scratches.
Endures chemicals (cleaning materials)
Washable and repels dirt.
Flexible yet also Endures UV rays.
Fast drying. Multi-thickness.
Very strong shine that lasts for many years.
Is not sensitive from heat and cold.
Endures mechanical hits.

Dururethane 120 glossy polyurethane furniture lacquer

Lacquer pu with 50% hardener not yellowing

Applications:

For valuable antique furniture with engravings.
For thick coating enabling a glass-coat effect.
For coating all types of furniture.
For wooden fences and walls.
For coating parquet floors.
For coating pergolas and garden furniture’s.

Technical specifications:

Theoretical coverage area: 15-18 sqm per liter.
Base-Hardener ratio: l:2 = 50%
Recommended number of layers for furniture: 2
Recommended number of layers for parquet floors: 2
Recommended layer width: 35-40 microns (dry)
Viscosity: 4-0.8 Pa.sec
Density: 0-1.1 gm/cm 3
Flexibility: 1 mm (SHEEN)
Percentage of solids in the base (section A) : 66%
Hardness: > 3 Dg (Erichsen)
Pot life – work time period after A+ B mixture: 4 hours

Contains:

High quality acrylic polyurethane polyol.
Isocyanates that don’t become yellow even after long period of exposure to the sun.
Solvents enrich with glycols and acetates.
Additives that improve quality and endurance.

Shade:

Clear.

Gloss:

Shiny

Dururethane 120 glossy polyurethane furniture lacquer

Lacquer pu with 50% hardener not yellowing

Touch-dry time:

20 minutes

Drying time period between layer applications:

6 hours. Final: 12 hours.

Application methods:

Spray, Airless, brush. roller.

Dilution:

Spraying, brushing: 25%-35% D-11 thinner.
Airless: 20%-30% D-11 4-5 atm. Nozzle 0.015”

Equipment cleansing:

Use D-11 thinner immediately after use.

Surface preparations:

Thoroughly clean the surface.

Primer paint:

Primer Sealer single component or isolation-polyurethane two component.

Packaging:

3.4 + 1.6 = 5 liter.
5 liters + 2.5 liters of hardener = 7.5 liters.
18 liters + 9 liters of hardener = 27 liters.

Storage:

In a shaded and cool place at room temperature with appropriate ventilation.
Keep lids hermetically sealed.

Dururethane 120 glossy polyurethane furniture lacquer

Lacquer pu with 50% hardener not yellowing

Shelf life span:

Lacquer: 12 months in its original pack.
Hardener: 6 months in its original pack.

Quality control:

In factory laboratories according to specifications.
COA and COC certificate.
ISO 9001-2015

Safety precautions:

Inedible, keep away from the reach of children.
Flammable – keep distant from heated areas, fires, flames, and sparks, prohibit smoking in working area.
While applying, good air ventilation is important. In case there is not enough air, use ventilation according to the ventilation table.
Wear protective glasses, gloves and suits.
Avoid direct contact of the paint and/or thinner with the eyes and skin. In case of contact, immediately wash thoroughly with water.
In case of an injury immediately get doctors assistance.
Read the safety instructions on the labels.
See M.S.D.S

Dururethane 120 glossy polyurethane furniture lacquer